Heat.net

Heat.net Store Home


New Z2 Gang Tool CNC Lathe (5C-6,000 rpm)with Fanuc VERY SPACE EFFICIENT For Sale


   New Z2 Gang Tool CNC Lathe (5C-6,000 rpm)with Fanuc VERY SPACE EFFICIENT
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

New Z2 Gang Tool CNC Lathe (5C-6,000 rpm)with Fanuc VERY SPACE EFFICIENT:
$44950.00

  • Z2

Precision CNC Gang Tool Lathe

GTCNC Turning Centers provide superior mechanical advantages that equate tolonger life, better performance and highly accurate machining specifications.The Z2 gang tool lathe is built with the most advanced machine constructiontechnology offered in the industry today with features and flexibility unmatchedin an affordable and sophisticated design.


Themodularity of the Z2allows it to beeasily adapted to a wide variety ofapplications. Packages have beendesigned to accommodate a range ofrequirements. We can offer automated loading systems, bar feed systems and an extensive array of toolingand workholding.


Machine Base

The machine is constructed from Meehanitecast iron, designed to provide a balance between rigidity and low inertial mass.In applications that require a small footprint, but need high rigidity this canbe critical.

The base does not compromise machiningquality, it is a balance between structural requirements for low vibration andminimum weight for rapid axis response. The key casting components are boltedin place and pinned after alignment to provide accuracy and repeatability inalignment.

Slide System

Rails

The slidedesign incorporates high performance “Super Rigidity” NSK linear rails mountedto sturdy, rigid, Meehanite castings on both axes. These NSK rails support 6circuit preloaded ball tracks. Each track is connected to the centralizedlubrication system.

Ballscrews

Precisionground class 3 double nut, pre-loaded NSK ball screws are located by pre-loadedangular contact NSK thrust bearing sets. Each ball nut and thrust bearing isconnected to the centralized lubrication system.

The X axisball screw is preloaded and mechanically balanced to prevent drop when power isturned off or the motor looses power.

Servo System

The X & Zaxis motors are driven through a 1:1ratio precision pulley system thus reducingthermal growth from the heatgenerated from motor.

The motorsare AC Digital High Response servos, This style is used due to its ability tosmoothly transition a change of direction. The Servo drives are linked to thecontroller with SERCOS fiber optical connections.

Each axis isequipped with independent home switches allowing easy re-homing on power up.These switches are backed by mechanical contact over-travel switches, these provide mechanical backup to theelectronic limits set within the control.


This systemprovides a generous machining envelope of 12” of travel in the

X-axisand 7.0” of travel in the Z-axis.

With itsvertical table equipped with 2 T-slots on the table, The ZV allows for the easymounting of a wide range of accessories.

The generous42mm (1.653”) center distance allows quick change riser systems to be used.

Spindle Systems

The Z2spindle is configured to ANSI A2-4 configuration . This can accept a 5C colletnose or a 5.3”(135mm) 3 jaw chuck.

Offering astandard 6,000 rpm spindle, the spindle employs four (4) P4 precision NSKbearings in a conventional spindle design.

This spindlecomes standard with an 8,000 rpm capable hydraulic collet closer creating a\"bar feed ready\" set up that is fully programmable.

Webelieve that a hydraulic collet closer offers better performance than “normal”air collet closers.

Internalrotating surfaces are lubricated with the hydraulic system oil, no dry airsurfaces exist in the closer. This leads to longer live and higher rpm limits.

Thissystem provide higher clamping loads thus eliminating push back of the bar inhigh load machining.

Hydraulicclamping of the chuck allows real world speeds and feeds when turning andfacing blanks.

The1.062” through hole allows the full capacity of a 5C collet to be used.


Turning Tooling

We have anextensive array of tool holders, work-holding devices, specialty tooling, andtooling packages and live tooling options available to satisfy most needs.

The Z2 model comes with a set of standard 42mm center height holders.

These holderslocate in position using pins to provide repeatability.

Hardinge®style holders can be used on our optional riser system. GT CNC offers a complete tooling catalog withall tool holders.


Special Features

Design

·Slant bed design allows for efficient chip control.

·Gang tool plate for multiple tool mounting and flexibility.

·Gangtool mounting method supports rapid, independent tool changes

and touch off.

·Accessarea for air feed and electrical cables for on table tools and automation.

·Chipenclosure and casting designed specifically to contain oil and chips.

·Interiorsheet metal is designed to eliminate binding on rapid axis travel.


Electrical

·220V 3 phase standard

·Onboard 110volt power supply.

·Highreliability, liquid tight, axis homing switches, and over limit switches.

·Airto air heat exchanger for electrical cabinet.

Fanuc OiTDCNC Control

The standard features include :


System


Program number O4-digit

Sequence number N4-digit

2 Simultaneously controlled axes

0.0001 inch Least input increment

Inch / metric conversion

Tape format for FS10/11

Axis Interlock

Machine lock

Emergency stop

Over travel

Position switch

Mirror image (X axis only)

Backlash compensation

Tangential speed constant control

Cutting feed rate clamp

Automatic acceleration / deceleration

Feed stop

Rapid traverse bell-shaped acceleration / deceleration

Linear acceleration/deceleration after cutting feed interpolation

Bell-shape acceleration / deceleration after cutting feedinterpolation

Linear acceleration / deceleration before cutting feedinterpolation

EIA/ISO automatic recognition

Label skip

Parity check



FanucOiTDCNC Control


Operation

Automatic operation

DNC operation

MDI operation

Dry run

Single block

JOG feed

Reset

Program number search

Sequence number search

Manual reference position return

Manual handle feed

Manual handle feed rate (X1,X10,X100)

Rapid traverse override (F0,25%,50%,100%)

Feed rate override (F0,150%)

Jog override

Spindle speed function (G97)

Constant surface speed control (G96)

Spindle speed fluctuation detection

Spindle override (50~120%)


Programming

Absolute/incremental programming (Combined use in the same block)

G code system A

M code function (M2 digit)

S code function (S4digit)

Decimal point programming

Diameter / radius programming (Xaxis only)

Positioning (G0)

Linear interpolation (G1)

Circular interpolation (G2-G3)

Dwell (G4)

Block Skip function (/ )

Reference position return (G28)

Reference position return check (G30)

Feed per minute (G94)

Feed per revolution (G95)

Plane selection (G17,G18,G19)

Coordinate system setting

Programmable data input (G10)

Automatic coordinate system setting (G54-G59)

Coordinate system shift (G53)

Direct input of coordinate system shift

Circular interpolation by R programming

Threading, synchronous cutting

Threading retract

Continuous threading

Variable lead threading

Canned cycle (G70,G71,G72,G73,G74,G76)

Canned cycles for drilling (G83)

Sub program call (2folds nested)

Work piece coordinate system preset

Direct drawing dimension programming

Chamfering/corner R

Custom macro B

Program stop / program end (M00/M01/M02/M30)

Custom macro common variables (#100~#149,#500~#549)

Work piece coordinate system


Tooling- Offsetting

T code function (T2 digit)

Tool offset pairs (64pairs)

Tool nose radius compensation

Tool geometry / wear compensation

Direct input of tool offset value measured

Tool life management function

Tool pairs for tool life management

Automatic tool offset

Editing

Part program editing

Program protect

Background editing

Extended part program editing

Reader/puncher interface

External message

Data protection key

Number of register-able programs (125)

Part program storage length (320m)


FanucOiTDCNC Control


Display

9\" monochrome CRT/MDI

Status display

Clock function

Current position display

Program name display

Parameter setting and display

Self-diagnosis function

Alarm display

Run hour and parts count display

Actual cutting feedrate display

Display of spindle speed and T code at all screens

Graphic function

Dynamic graphic display


Machine Specifications*

Features

Control

Fagor 8055iTD

X Axis

9.2”

Z Axis

6.0”


Ball screw type

5mm pitch double nut NSK ball screws

C

Spindle Motor

6000rpm

Spindle Bore

( 27mm 1-1/16th)

Max Bar Size

( 27mm 1-1/16th)

Spindle Nose

( 27mm A2-4)

Max Chuck Size

( 27mm 5C)

Collet Activation

Hydraulic with M code & push button or M code & Foot Pedal




Rapid Traverse

757 pm (0 to 757ipm in 50 milliseconds)

Position Repeatability

±0.00005”

Position Accuracy

±0.0001\"

Spindle TIR Max.

0.00005”

Coolant Type

On the table flood coolant (mist coolant optional)

Co

Requirements



Voltage

( Fagor) 220VAC 3 phase Optional


Power Requirements

7.5 KVA

Machine Weight

2500 lbs

Machine Dimensions

L x D x H 50\" X 42\" X 62\"

Specifications are subject tochange without notice.


Buy Now

Other Related Items:



Related Items:

2010-2019 JEEP DODGE CHRYSLER Radio OEM CD Player Sirius UConnect VIN # INCLUDED picture

2010-2019 JEEP DODGE CHRYSLER Radio OEM CD Player Sirius UConnect VIN # INCLUDED

$164.87



Dubia Roaches - Small, Medium, Large & Feeder Males picture

Dubia Roaches - Small, Medium, Large & Feeder Males

$100.00



Ring Sizing Service Fee (20) picture

Ring Sizing Service Fee (20)

$100.00