![1/2\](img-large/g/YH0AAOSwiBNfGId1/s-l1600/1-2-x-1-1-2-x-18-Oil-Hardening-Flat-Stock.jpg "1/2\")
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1/2\" x 1-1/2\" x 18\" Oil Hardening Flat Stock:
$29.85
Product Features:
- Thickness: 1/2\"
- Width: 1-1/2\"
- Overall Length: 18\"
Tolerances:
- Thickness +/-.001”
- Width up to 8”, +.000/.005”
- Length: +1.25 / .250\"
Description:
- O-1 Oil Hardening
- Stock is dimensional stable - use it for the most intricate work
- Deep hardening characteristics and fine grain structure
- Machines freely - fully spheroidized, annealed
Hardening:
It is recommended that stock be heated uniformly to 1450°-1500° F and quenched in oil. Temperature of the quenching oil should be 120°-140°F for best results. Do not quench in water because this is an oil hardening steel.
Tempering:For maximum toughness, a tempering time of one hour at temperature is recommended.
