When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
1/64 Scale 6 SPOKE Volk Rays TE37 v8 Real Riders Wheels Rims Tires Set with Falken Azenis or Hankook Ventus or NITTO NT555 Tire Letters for Custom Hot Wheels
Easy to install Real Rider Wheels with rubber tires for Hot Wheels and 1/64 Scale Cars.
1 Set is for 1 car.
1 Wheel set includes 4 wheels, 4 tires, 2 axle rods with ridges on tips.
Simply insert axle into 1 wheel and the axle will grab on because of ridges, no glue needed.
May need to tap axle into wheel lightly with hammer to push it in further. (Read below for more detailed guide)
SIZE: 10.5 x 5mm
Fits most Hot Wheels easily. Can do drilless wheelswap easily.
More pictures coming soon!
May require custom axles for perfect fit. Cut if too long, split in half to extend (will require glue)
NOTE:These may not be restocked regularly or ever again. Price reflects availability and demand.
HOW TO INSTALL:
Drill method:
1) Drill out base rivets with roughly a 9/64\" drill bit.
2) Take car apart.
3) Pry open / remove base tabs holding in original wheel axles.
---for plastic bases, you can easily pry them open with small flathead screwdriver, or just snap them off with blade/wire cutters.
---for metal bases, you may be able to snap them off with wire cutters (careful as this will send the tab flying across the room!) if you cannot remove the tab entirely, you will need to use dremel disc to grind off the rest of tab.
---if you don\'t care about the stock wheels/axles, you can also just bend them out to easily cut the axle with wire cutters
4) Replace wheels/axles
---if the custom wheels don\'t fit because axle is too short/long, you will need to adjust axle length by cutting.
5) Reassemble car.
---If you didn\'t overdrill, the base might just snap back together, otherwise you will need to lay car on it\'s roof and add some super glue onto the posts where the rivets used to be, or use some epoxy putty.
Optional: Lower car\'s ride height by sanding down the interior that holds the axles.
No Drill method:
1) Cut stock axles with wire cutter.
---you may need to bend the axles down to have room to cut them
2) Insert 1 wheel into 1 axle rod, lightly tap axle into wheel with hammer if needed.
--- Feed axle rod with wheel through car\'s base
--- Insert another wheel into axle rod on the other side of car/axle
3) Adjust as needed.
---if axle rod is too long: uninstall axle and trim with dremel disc and try again
---if axle tube is too short (rare): pull out wheels slightly (very little adjustability) or split in half and glue each rod individually.
---if there is play in the wheels, add spacers to fill in the gaps from wheel to base (you can make your own or use my 3D printed spacers for an easier time)
Note: if you don\'t use drill to open car, you can\'t lower the car\'s ride height.
Be sure to check out my other listings such as:
-Real Riders 1/64 Scale Wheels and Tires
-Headlight and Taillight Decals-Universal Liveries-Universal Wraps-Carbon Fiber Wrap-Side View Mirrors-Spacers
SHIPPING INFO:
All are flat rates, meaning it doesn\'t matter how many items you buy, shipping price will be the same :)
For decals, axles, and/or spacers only!
USA: $3.99 First Class Package with tracking
International: $3.99 First Class Envelope without tracking
For wheels, decals, axles, and/or spacers!
USA: $4.99
Canada: $9.99
International: $12.99
If your total shipping cost is higher than above, click \'Request Total\' in your cart so I can fix shipping cost.
If not possible, no worries, I will refund any extra shipping costs paid for :)
