10\" Clear Standard Whole House Water Filter System 4 Sediment 50 Micron Filters For Sale

10 Inches Transparent Standard Whole House Water Filter System with Presser Relief Valve, 3/4” Inlet/Outlet Brass Port and Yearly Supply (4) Sediment Cartridges 50 Micron

• DURABLE STRUCTURE: 10” Transparent Standard Housing is proper for heavy sediment applications. The housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness. The cap has 3/4\" inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes. 10” Standard 50 Micron Sediment Filters Used for effectively removing most sediments from water

• POINT OF USE: This System for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, well water filtration, food service, and irrigation. Extends life of Washing Machines, Water Heaters & Other Household Appliances. Keeps water fresh by reducing sediment, scale, rust, dirt, sands, and silt

• EASY TO OPERATE: There is rubber O-ring on the top of the housing body to ensure a watertight seal. A pressure relief button on the inlet side of the cap releases pressure in the housing for changing filter cartridges. Unique cap design allow quickly and easy to remove housing to replace cartridges. Transparent housing body allows visually to determine when cartridge should be changed

• 50 MICRON SEDIMENT CARTRIDGE is wrapped and sealed and meets NSF Standards and Regulations. Dimensions: 10” x 2.5”. WELL-MATCHED: Dupont PFC5002, WFPFC5002, 3M CFS110, AP110-NP, AP101S, AP101T, Aqua Pure AP110, AP11T, AP51T, Hydronix SGC-25-1005, Culligan P5, P5-D, P5A, OmniFilter RS14-SD and RS14-SS, GE FXUSC, Aquaboon S-5M, Manitowoc K-00173, Whirlpool WHKF-GD05, American Plumber W5P, Pureplus PP10-05, however for best preferment use only original RONAQUA CARTRIDGES

• WELL-MATCHED FOLLOWING HOUSINGS SYSTEMS: DuPont WFPF38001C, WFPF13003B, Culligan WTR Filter HF-360A and HF-150A, American Plumber WC34-PR, Geekpure RO5-FH10, Hydronix HF3-10CLBK34, EcoPure EPW2 10\" Transparent Standard Housing for Whole House Water Filtration System with 3/4\" Inlet / Outlet Brass Ports (RA-125-10) is proper to use for reducing sediment, dirt, rust, & suspended particles in incoming water to you house.

  The transparent housing body is made of reinforced polypropylene for strength and resistance to chemicals, and the blue cap is made of high-flow polypropylene for toughness.

  The blue cap has 3/4\" inlet / outlet brass ports which allowed better sealed connections to the corresponding pipes.

  There is rubber O-ring on the top of the housing body to ensure a watertight seal.

  A pressure relief valve on the outlet side of the cap releases pressure in the housing for changing filter cartridges.

  Those Housings for use in various applications and is usually placed in the main water line entering the house including, but not limited to residential drinking water filtration, food service, and irrigation.

  Easy to connect multiply housings in one Custom Whole House Water Filtration System to fit your specific needs.

  Filter Cartridges Included in this Set are Melt-blown Four Layers Filtration Polypropylene Sediment Filter (4 pack)

  A Sediment Water Filter removes the physical debris and impurities from your water. The sediment filter has tiny holes through which water is able to pass, however the unwanted particles are not. As these particles come in different sizes, so do the filters. The filter sizes are measured in microns, the smaller the micron measurement, the smaller the holes in the filter, allowing to hold back the smallest of particles. Generally, for water that is more visibly polluted, containing larger particles, a sediment filter of a larger size (such as 20 or 50 microns) is recommended in the first stage of installation to prevent the clogging of the next stage(s) of filters.

  This sediment filter is often the first filter installed in the Reverse Osmosis circuit and acts as a net as it catches unwanted particles, including sand, dirt, silt, rust, and other fine particles. Sediment filters are made of fine melted polypropylene, which is then blown and spun into a cylinder-like form. Polypropylene is a substance that is resistant to chemical solvents, bases, and acids. Removal of these particles allows filters, such as Carbon Block or GAC (Granular Activated Carbon) filters, to perform better and for longer periods of time.

  These particles and pollutants come from water sources, old and dirty pipes, as well as contaminants that are used to treat the water.

  Multi-layer Gradient Filtration Outer ZoneMid ZoneInner ZoneInnermost Zone These Sediment Water Filters Intercept all Following Impurities
  • Rust & Corrosion- Rust is a type of corrosion. Corrosion is the process by which certain materials, metals and non-metals, deteriorate as a result of oxidation. Rusting is oxidation of iron in the presence of air and moisture. ... Corrosion requires surface exposure to air or chemicals
  • Coarse Sand is our concrete sand that is washed and screened to a larger grit than our Fine Washed Sand (masonry sand). Coarse Sand is used with aggregate, water, and cement in the production of ready-mix concrete.
  • Hard Scale causes a variety of problems in the home. Stains are probably the most noticeable result of hard water scale. Stains appear in toilets, sinks, and showers. Some hardwater scale are less noticeable, such as scale build up in pipes and in appliances which can cause costly repairs or the need to replace appliances.
  • Fine Sand is very fine, screened sand that is typically tan in color. This type of sand is commonly used as base sand for above ground swimming pools, paving stones, sidewalk blocks and retaining walls. It is alternately used in stucco and cement applications.
  • Particles is a small localized object to which can be ascribed several physical or chemical properties, such as volume, density, or mass. They vary greatly in size or quantity, from subatomic particles like the electron, to microscopic particles like atoms and molecules, to macroscopic particles like powders and other granular materials. Particles can also be used to create scientific models of even larger objects depending on their density, such as humans moving in a crowd or celestial bodies in motion.
  • Sediment is a naturally occurring material that is broken down by processes of weathering and erosion, and is subsequently transported by the action of wind, water, or ice or by the force of gravity acting on the particles. For example, sand and silt can be carried in suspension in river water and on reaching the sea bed deposited by sedimentation; if buried, they may eventually become sandstone and siltstone (sedimentary rocks) through lithification. Sediments are most often transported by water (fluvial processes), but also wind (aeolian processes) and glaciers. Beach sands and river channel deposits are examples of fluvial transport and deposition, though sediment also often settles out of slow-moving or standing water in lakes and oceans. Desert sand dunes and loess are examples of aeolian transport and deposition. Glacial moraine deposits and till are ice-transported sediments.
  • Dirt is unclean matter, especially when in contact with a person\'s clothes, skin or possessions. Common types of dirt include: Dust: a general powder of organic or mineral matter; Filth: foul matter such as excrement; Grime: a black, ingrained dust such as soot; Soil: the mix of clay, sand, and humus which lies on top of bedrock.
  • Silt is granular material of a size between sand and clay, whose mineral origin is quartz & feldspar. Silt may occur as a soil or as sediment mixed in suspension with water and soil in a body of water such as a river. It may also exist as soil deposited at the bottom of a water body, like mudflows from landslides. Silt has a moderate specific area with a typically non-sticky, plastic feel. Silt usually has a floury feel when dry, and a slippery feel when wet. Silt can be visually observed with a hand lens, exhibiting a sparkly appearance. It also can be felt by the tongue as granular when placed on the front teeth (even when mixed with clay TypeFine Melted Polypropylene 50 MICRON Flow Rate 5 GPM Unit Height IN/CM12.5 IN/31.75 CM Operating Temperature40°F (4.4°C) - 125°F (51.7°C) Unit Length IN/CM5.125 IN/13.02 CMOperating Pressure20 PSI (1.4 bar) - 60 PSI (4.5 bar)Unit Width IN/CM 5.125 IN/13.02 CMCartridge LifetimeReplace two or three times a year - depending on your water qualityInlet/Outlet Ports3/4\" NPT BressCartridge PackagingThis filter is wrapped and sealed and meets NSF (National Science Foundation)