10A 110V Digital Temperature Controller Temp Sensor Thermostat Control Relay US For Sale

110V 1 Relay Digital Fahrenheit Thermostat Temperature Controller

There's 1 relay on this controller. Refrigeration and heating mode can be set through the menu. Can be used for domestic freezer, water tanks, refrigerator, industrial chiller, bolier, steamer, industrial equipments and other temperature-controlled systems.

For example, If you choose Heat mode(Set HC to H). Set Temperature Value to 80°F. Set d value to 20°F.The relay will be connected when the temperature drop to 60°F(set temperature value-d value). And the relay will be disconnected when the temperature reaches 80°F.
If you choose Cool mode(Set HC to C). Set Temperature Value to 80°F. Set d value to 20°F.
The relay will be connected when the temperature reaches 100°F(set temperature value+d value). And the relay will be disconnected when the temperature drops to 80°F.
Our video shows exactly how this functions. Real application examples:

Video for Setting: you don't want to waste time on wiring, we have a Plug-n-Play version for you, just click the picture below, it can control minimum 0.1 F range: -4°F~+212°F

Slew range of temperature control: 1°F-25°F(max temp span between cut in and cut off)

Control resolution: 1°F(minimum temp span between cut in and cut off)
If you need controller which can control minimum0.1°F span, please check here, choose the pre-wired one in our store

Power supply: 110V AC, 50/60Hz

Power consumption: less than 3W

Relay contact capacity: retention: Yes

Compressor delay protection: YES

For DIY incubation, aquarium, sous vide, etc.

Size:

• Front panel size: 75(L) x 34.5(W)(mm)
• Mounting size:71(L) x 29(mm)
• Product size:75(L) x 34.5(W) x 85(D)(mm)
• Sensor Cable length: 3m (include the probe)
• Sensor probe: length: 2cm(25/32''), Diameter: 4mm(5/32'')

Package Include:

1 x 110V temperature controller

1 x NTC sensor (3m cable)

1 x English Manual