When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Description:Material: ABSSize (Length x Width x Height): about 5.5 x 3.8 x 3.2cm (2.17 x 1.50 x 1.26\'\')Supply Voltage: AC 110V/220V, switched automatedlyTemperature Measurement range: -50 +110 degree CelsiusTemperature Control Range: -50 +110 degree CelsiusControl Accuracy: 0.1 degreeDisplay Accuracy: 0.1 degreeMeasuring Input: NTC10K Waterproof Probe L=1 MeterOutput Type: Relay Output (Output Switch)Output Capacity: 10A
Instructions:1.Set the startup temperature:Press ▲ key once to start the display temperature. Press and hold ▲ key for about 3 seconds to start the temperature digital flashing. Use ▲▼ key to set the desired temperature value.
2.Set the stop temperature:Press the ▼ button to display the stop temperature. Press and hold the ▼ button for about 3 seconds to stop the temperature digital flashing. Use the ▲▼ keys to set the desired temperature value.
3.How to restore the factory settings:When power is on, press and hold ▲▼ at the same time, the digital tube display 888 will then automatically jump to the detected temperature, that is, restore the factory settings.Package Includes:1 xW3001 110V/220V Incubator Digital Temperature Controller
