When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
>>This cable is suitable for household drinking water pipe, drain pipe freeze protection in winter and other heating applications. >>The cable can self regulate the output power according to the temperature, it won\'t overheat, so the temperature controller is not necessary. >>The cable is with high quality PE jacket, and inner has the PE composite insulation layer, better water-proof and good quality.
Cable structure: 1. Copper-core wire: 8mm width : double 7×0.23mm 10mm width : double 7×0.3mm 12mm width : double 7×0.42mm 14mm width : double 7×0.42mm 2. Conductive heating element 3. Insulation of heating element 4. HD polyolefin outer jacket Specifications: 1. Standard color: black, (custom) 2. Temperature range:Max maintain temperature: 65°C;（8mm width） Max maintain temperature: 70°C;（10mm width） Max maintain temperature: 75°C;（12mm width /14mm width） Max enduring temperature: 105°C;（12mm width） 3. Minimum installation temperature:-40°C 4. Start-up current ( 10°C ): ≤0.6A/m 5. Max circuit length: 20m 6. Three Dimension to buy : 3mm thickness, 8mm width. : 4mm thickness, 10mm width. : 5 mm thickness, 12mm width. : 5 mm thickness, 14mm width. 7. Working voltage: 12V、 24V、36V、110V、220V、380V 8. Power: (at 10C degrees) 8mm width : 20W/m （ 12V is 40 W/m,whichHeating more faster ） 10mm width : 25W/m 12mm width : 30W/m 14mm width : 35 W/m 9. Min bend radius: 15mm 10.Structure Flame retardant basic type : Tinned copper wire 、PTC Semiconductor、 PVC flame retardant shell
Flame retardant antistatic type :Tinned copper wire 、PTC Semiconductor、 PVC flame retardant shell 、Stainless steel shield （Can be grounded）
Flame retardant strengthening type : Tinned copper wire 、PTC Semiconductor、 PVC flame retardant shell （Inside and outside Double layer） 、Stainless steel shield（Can be grounded）
Installation diagram: 1) Seal the end of the cable with heat shrinkable tube or other electrical insulating tape. DO NOT connect the two conductors together! 2) Connect the other end with cold wire or plug (for connecting to the power supply). 3) Wrap the heating cable on water pipes or fastening straight on pipes, both are ok. Put the whole cable on the pipes and fasten it every 30~60cm with thermal tape or aluminum tape(sold in my store). 4) Suggest to wrap a layer of rubber insulation on the pipe, enhance efficiency of the heating cable and save energy, also can protect the heating cables. 5) Connect or plug into 12V、24V、36V、110V、220V、380V . The heat trace system is finished. 6)Each package is presented with two pairs ofcopper tubes and a heat shrinkable tube.
Applications: The self regulating heating cable is widely used for pipe/tank freeze protection, such as water pipe, solar water heater pipe, oil pipe, downspout. Soil warming for plants , home pipeline anti-freezing, solar pipeline anti-freezing, roof snow melting, road surface ice melting, easy solidification, condensation, viscous liquid pipeline , Cars and Trucks， Floor heating and other heating applications.
