When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
- 150 MHz Passive Oscilloscope Probe with accessory set
- Slide switch in the head selects attenuation of x1 (Bandwidth DC to 6MHz) or x10 (Bandwidth DC to 150MHz)
- Rise time: 2.3nS (x10), 58nS (x1)
- Designed and calibrated for use with instruments having an input impedance of 1 MΩ shunted by 20pF; however, it may be compensated for use with instruments having an input capacitance of 10 to 30pF.
- Includes Probe, Channel Identifier Clips, Sprung Hook, Ground Lead, Insulating Tip, IC Tip, Adjusting Tool, Measuring Tip, Sprung Earth Tip, BNC Adapter, and Probe Tip Cover
The HP-3150 is a passive high impedance oscilloscope probe designed and calibrated for use with instruments having an input impedance of 1 MΩ shunted by 20pF; however, it may be compensated for use with instruments having an input capacitance of 10 to 30pF. The cable length is about 4 feet. The probe incorporates a two position slide switch in the head which selects attenuation of x1 or x10: Position X10:
Attenuation Ratio: 10:1
Bandwidth: DC to 150MHz
Rise Time: 2.3nS
Input Resistance: 10MΩ when used with oscilloscopes which have 1MΩ input.
Input Capacitance: Approx. 13 pF
Compensation Range: 10 to 30 pF
Max. Input Voltage: 500V CAT II (DC + peak AC) derating with frequency Position X1:
Attenuation Ratio: 1:1
Bandwidth: DC to 6MHz
Rise Time: 58nS
Input Resistance: 1MΩ (oscilloscope input resistance)
Input Capacitance: 56 pF plus oscilloscope capacitance
Max. Input Voltage: 150V CAT II (DC + peak AC)
Included Accessories:
Channel Identifier Clips (2 Blue, 2 Red, 2 Green, and 2 Yellow)
Sprung Hook
Ground Lead
Insulating Tip
IC Tip
Adjusting Tool
Measuring Tip
Sprung Earth Tip
BNC Adapter
Probe Tip Cover
