When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The latest updatesAutobox LLC
Quality Engineering ProductsLos Angeles Based Home Workshop SpecialistProduct Details
Description --
Autobox flag ship product, the most eye-catching part of this mini lathe is its Exclusive Two-Axis, 4-Way Auto Feed design. It provides both longitudinal and cross auto feed in both directions (left/righ, forward/backward). You can produce highly accurate and consistent parts, ensuring that each part meets the required specifications and has better finishing.
And another major improvement of this lathe is the gearbox, by using new designed 4-stage driving system plus variable speed control, it increases torque at low speed significantly, which makes cutting thread on metal is possible.
Also add another Lead screw support bearing on its left end to avoid compression load thus reduces the vibration when engaging auto-feed or threading.
Cam-locking tailstock with its control level relocated on top, so it won't affect winging the handle on compound slide when it's approaching the tailstock.
It also features digital RPM display (spindle speed DRO) for dialing in the perfect cutting speed. Full metal gears and hand wheels for a long service lift span. Ratchet handles for operational convenience.
This lathe includes all the essential standard equipment you'll need to get up and running including: a 4" 3-jaw chuck with internal and external jaws, 4-way turret tool post and MT#2 and MT#3 dead centers.
Extra Starer Package includes 11pc lathe tools, live center, drill chuck, center drills and now you are read to cut.
Like all of the AUTOBOX lathes, it comes with a 1-year warranty covering parts and assuring the units free from factory defects.
The manual was written by our U.S.-based Documentation Department is packed with useful information. The AUTOBOX Technical Support team are also U.S.-based. Parts for the lathe may be available online and shipped from the AUTOBOX warehouse in Los Angeles, CA.
Major improvements--
Exclusive Two-Axis, 4-Way Auto Feed design.
4-stage new gear box (replace hi-low gears) large torque cover all speeds
Lead screw support bearing on both ends (add one on left end) reduce vibrations, provide better cutting result, when using auto feed.
Tailstock cam locking handle relocation (from side to top)
Specifications --
Swing over bed: 8"
Swing over cross slide: 4.3" (110mm)
Distance between centers: 16"
Spindle bore: 0.78" (20mm)
Chuck bore: 2"
Spindle nose taper: MT#3
Motor: 550W (3/4HP), 110V, single-phase
Number of speeds: 4-stage, full variable
Range of speeds: 0-330-660-1000-2000RPM
Leadscrew: 16TPI
Compound rest travel: 2"
Cross slide travel: 2.5"
Carriage travel: 11.6" (295mm)
Maximum tool size: 3/8" (10mm)
Tailstock quill travel: 2”
Tailstock barrel taper: MT#2
Longitudinal feed speed: 0.1-0.2mm
Number of inch threads: 18
Range of inch threads: 12-52TPI
Number of metric threads: 9
Range of metric threads: 0.5-2.5mm
Overall dimensions: 810x330x340mm
Approximate shipping weight: 160lbs
Features --
Exclusive Two-Axis, 4-Way Auto Feed design.
4-stage variable speed, high torque through all speeds
All metal gears and hand wheels, ratchet levels
Spindle speed digital readout
16-TPI reversible leadscrew
Cuts LH and RH threads
Chip tray and backsplash guard
Emergency stop
Forward and reverse in all speeds
Inch/metic dials
Threading dial indicator
Quick-locking tailstock
Inclusion--
1 x Oil Tray
1 x 4" Three Jaw Chuck
1 x User’s manual
1 x Tool Box
In the tool box:
3 x Hand Wheel Lever
1 x Dead Center MT2
1 x Dead Center MT3
1 x Oil Bottle
1 x Chuck key for the 3-jaw chuck
3 x Reversible Jaws for the 3-jaw Chuck
1 x Hex Wrenches Set (2/2.5/3/4/5/6/10mm)
3 x Double Ended Open Wrenches (8/10,12/14,13/16)
10 x Change Gear (30T, 35T, 40T, 40T, 45T, 50T, 55T, 57T, 60T, 65T)
1 x Philips Screwdriver
1 x Flat Head Screwdriver
1 x Belt
Starter Package--
1 x 11pc caroffere tip lathe tools (for turning, facing, boring, threading, parting, slotting e.g.)
1 x Live center
1 x Tail stock drill chuck + some center drills
Add to Favourites
Customize Information
Our experienced machine builders will provide you with professional advices, from finding a right size screw to converting your old lathe to a CNC machine. If need any help, just talk to your local specialist today.
Why Choose Us
Autobox LLC is a wholly American owned and operated company. We are specialist of machines and accessories for metal and woodworking. We care of our customers, our product are born from customers real demand. We are always happy to invite customers to contact us at any stage of the purchase, e.g. from the ordering stage right up to the completion of the project.
Shipping Payment and Warranty
Items will be posted to your address with in 24 hours. Please make sure that is your correct delivery address.
Normally we use USPS, FedEx or UPS.
Tracking number will be provided on same day we post.Payment must be made in 3 working days after placing the order.
We accept PayPal, Bank Deposit or Pay over the Phone. (2% Surcharge)
Pick up available from El Monte 91731 by appointment only.
For warranty and return, please contact us for more details.
Normally we provide 1 year manufactures warranty (3 month for a commercial use product) for general products but not for models and consumable products.
Contact Us
More Featured ItemsLathe MachineMilling MachineDilling MachineAccessories
Copyright (C) 2024 Autobox LLC All rights reserved.
