When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
WE ALWAYS SELL THE FRESHEST DOW PRODUCTS BECAUSE WE ALSO USE THE PRODUCTS TO SERVE THE NORTH TEXAS AND SOUTHERNOKLAHOMA'S INSTALLATION NEEDS
- box not included with order of 2 tubes
This sale is for two Tubes.DOW U428+ Is a high viscosity adhesive or very thick glue so we suggest using a professional caulking gun or Power gun when applying to a vehicle. If you are using a standard caulking gun or a hand pump please make sure and preheat the tubes between 10-15 minutes with a heat gun or hair dryer.
Speed Installations by Eliminating Priming Step
U-428 Plus adhesive are one-component, conventional-cure adhesives.
They eliminate steps and speed installations by incorporating glass primer into
the urethane. They are primerless to glass and require only BETAPRIME™
5404A primer if the metal is scratched during glass removal, or when bonding to
encapsulations or pre-applied adhesive systems (PAAS). Both products provide
improved decking, even in hot weather.
Conventional-cure adhesives like U-428 Plus adhesiverely on
temperature, humidity and time to cure. The water in the air causes a chemical
reaction in the adhesive. The adhesive bead cures from the outside to the center
as the moisture diffuses into the adhesive. The curing bonds the adhesive to the
substrates and existing bead of urethane adhesive.
Applications
Structurally bonded or direct glazed automotive glass, such as windshields,
backlites, quarter glass and other stationary glass
Other uses, such as attaching hardware to glass and backfilling to install
reveal moldings or other trim
When using428 pluson installing auto glass, you must use5404 primeron the pinchweld only when bare metal or scratches are in the pinchweld. Primer will stop corrosion, rust and will bond the urethane to the glass to standards. We sell the primer as well if your situation requires it. If bonding urethane to a complete Bare Metal thenBETAPRIME 5201 Bare Metal Etch Primershould be applied following the5404 primerfor proper bond.
Professional use product. Purchaser assumes all liability for knowledge of product use and application.
BETASEAL glass bonding systems are used to originally install auto glass in the majority of vehicles worldwide, making the adhesives the perfect choice when restoring windshield structures to the original strength and specification. All aftermarket BETASEAL adhesives are FMVSS crash proven and meet long-term durability requirements for structurally bonded/direct glazed automotive glass, such as windshields, backlites, quarter glass and other stationary glass. BETASEAL U-428 PLUS Quick Cure Primerless to Auto Glass Urethane Adhesive provides primerless-to-glass convenience with excellent workability, sag resistance and convenient drive-away times.
