When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Rigid Axle
- Standard Transmission
- Automatic Transmission
Chrysler 9.25\" 12 Bolt Gear Package DescriptionPackage Includes:
(1) Ring and Pinion Gear Set
(1) Differential Master Install Kit
- Rigid Axle\'s aftermarketgear set is made using a five-cut, face milled manufacturing process. Once set up correctly, this will give a square contact pattern on the drive and coast side of each tooth.We are proud of our ring and pinion lines, and you will be too!
* Note: Chrysler 9.25\" ring gears may make contact with the OE housing. We recommend you clearance the housing to allow for a 0.020\" gap. When running 4.56 or 4.88 ratio gear sets, OE and aftermarket carrier cross shafts will require clearancing in order to install the axle shaft c-clips. When running 3.21 - 4.10/4.11, no clearancing is required!
- Remember to properly break in your new gear set! Click here for instructions!
- Our Master overhaul kits come with everything you need to replace, modify, or rebuild your differential. This will allow you to get the job done quicker, and cheaper at the end of the day. Rigid Axle master bearing install kits include:
- Both (Inner & Outer) High Quality Koyo Pinion Bearings and Races
- High Quality Koyo Carrier Bearings and Races
- Pinion and Carrier Shims
- Pinion Seal
- Pinion Nut
- Ring Gear Bolts
- Crush Sleeve and Preload Shims
- Loctite
- RTV Sealant or Cover Gasket
- Rigid Axle is proud to offer our customers a full line of differential, transfer case, and transmission parts. We specialize in complete rebuild kits for domestic cars and trucks. Give us a call with your year, make, and model and we\'ll build you a custom kit for your build!
Applications
- Chrysler Aspen (2006 - 2009)
- Dodge Dakota (2001 - 2010)
- Dodge Durango (2001 - 2009)
- Dodge Ram 1500 1/2 Ton (2001 - 2010)
- Dodge Ram Van 1500 1/2 Ton (2001 - 2003)
- Dodge Ram Van 2500 3/4 Ton (2001 - 2003)
- Mitsubishi Raider (2006 - 2009)
Specifics
- Cover Bolt Quantity: 12
- Differential Model: Chrysler 9.25\"
- Carrier Spline Count: 31
- Pinion Shaft Diameter: 1.876 Inch
- Pinion Spline Count: 29
- Ring Gear Bolt Quantity: 12
- Ring Gear Diameter: 9.25 Inch
- Ring Gear Material: Heat Treated 8620 Steel
- Ring Gear Rotation: Standard
- Contact Us
- About
![2001-2010 Chrysler 9.25\](img-large/g/iigAAOSwsPJkegeI/s-l1600/2001-2010-Chrysler-9-25-12-Bolt-Ring-and-Pinion-w-.jpg "2001-2010 Chrysler 9.25\")
