When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Product Description:
20-key RF controller adopts the advanced micro control unit,it is used for controlling a variety of lamp whose source of light is LED. Forinstance, point source of light, flexible light strip, wall washer lamp, glasscurtain wall light and so on; it has many advantages such as low price, easyconnection and simplicity to use. Meanwhile, you could adjust brightness, staticcolor choices and various dynamic changes in lighting effects through wirelessremote control. And according to the actual need of customers, it can carry outjumpy changing, gradual changing, stroboflash and other effects of change.
Technical Parameters:
Working temperature
-20-60℃
Supply voltage
DC5V, 12V~24V optional (specify the required voltage on orders)
0utput
3 channels
Connecting mode
common anode/cathode optional (specify the required voltage on orders)
External dimension
L91*W88*H24 mm
Packing size
L106*W106*H66 mm
Net weight
210g
Gross weight
240g
Static power consumption
<1W
Output current
<8A(each channel)
Output power
5V:<120W, 12V:<288W, 24V:<576W
3.Each press, the green lightflash one time, indicating that has entered the next state.
4.Standard colorchanges as follows:
Brightness +
Brightness -
pause
on/off
Static red
Static green
Static blue
Static white
Static white
Static yellow
Static cyan
Static purple
Auto run
three base color jumpy
Three color gradually change
speed +
Flash
seven base color jumpy
Seven color gradually change
Typical Applications:
NOTES:
1. Supplyvoltage of this product is DC12V~24V, never connect to others or AC220V.
2. Lead wireshould be connected correctly according to grade that connecting diagramoffers.
3. If the loadis more, by way of port 2 to connect the power will be better.
4. This productis not to overload;
Package included :
1xRF RemoteControl
1xLED SyncController
1x user manual
Common Problems:
Problems
Possible cause
Solution
1. Lamp does not light after power
Power cord is not properly connected, or there is not output switching power supply
Connect the power cord properly or replay the power
Lamp power cord is not connected or short circuit
Connected lighting power cord
2. After connecting some of the load the controller does not work
The connected load is too large，so that it has burned in some of the components of the controller
Replace parts of components or replace the items:
Waterproof 5050-RGB LED Strip Suit Waterproof5050-RGBLED Strip No waterproof 5050-RGBled strip RGB LED Strip Extension Wire Wifi Cellphone RGB led light strip controller Wifi CellphoneRGB(W) led light stripcontroller Music RGB LEDlight strip controller RF Metal RGBLED light stripcontroller 12V 6A LED Light Strip IR Remote Controller 12V 5A 60W AC/DC adapter power supplier
12V 12A 150WAC/DC adapter power supplier 12V 20A 240W AC/DC adapter power supplier 20key Remote 12-24V 24A RGB LED Sync Controller Touch Remote 12-24V 24A RGB LED Sync Controller
Marquee lights Magic Lamp LED light strip suit 3528-RGB LED Light Strip Suit Andriod iOS Phone Control Wifi LED Lamp Andriod iOS Phone Control Bluetooth LED Lamp
