24\" X 14 Steel Return Air Filter Grille For 1\" Filter - Fixed Hinged - Ceiling - For Sale

24\" X 14 Steel Return Air Filter Grille for 1\" Filter - Fixed Hinged - Ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White [Outer Dimensions: 26.5 X 15.75]


You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.

High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges.Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish- Smooth, Shiny, Scratch-Resistant, Beautiful.


This model has ½” fin design
This model has fixed hinges so that you cannot completely remove the door for safety.
This model uses a 1\"\" thick filter.

How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the \"\"hole\"\" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed width + 2.5, listed height + 1.75\"\".

Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20\"\" wide by 14\"\" tall, order a 20x14. If your hole is 14\"\" wide by 20\"\" tall, order a 14x20.\"