When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Dynamically balanced, this blower mounts in any position and operates with minimal noise and vibration, to maintain CFM at higher static pressures. This is probably the most used blower in the outdoor wood furnace industry. This Fan is used on the WoodMaster 4400 & 5500, HeatSource Model 1000 & Taylor T-750, This Fan is also used on the Heatmor 200css & 400css, Heatmore 200SSR2 &400SSR2, Johnson John (Jr models), Freedom Outdoor Elimator and many other applications. Steel housing has a Gray baked-on enamel finish. Automatic Thermal Protection. Noise and vibration are held to a minimum to maintain CFM at higher static pressures. Direct replacements for many OEM blowers with same physical footprint. All-position mounting. Lead Length 6" . Min./max. operating temp. range: -20 Degree to 104 Degree F. Not Intended for use as inline blowers for wood burners. Blower Outlet Shape: Rectangular. Discontinued and replaced by Dayton 1TDP7. CFM @ 0.000-In SP: 148. 115 Volts, 50-60 Hz, 1 Phase. Max Ambient Temp: 104 Deg F.Full Load Amps: 1.37. Motor RPM: 3160. Dimensions: Wheel diameter 3 13/16'', wheel width 2 1/2'', inlet diameter 3 1/8''
All-position mounting lets you use this blower in any number of applications.
Noise and vibration are held to a minimum to maintain CFM at higher static pressures.
ODP motor with auto thermal protection
Replaces: Dayton 1TDP7, 4C446, 4C005 & Fasco A166, 7021-3469
UL Component Recognized, CSA Certified. Not Intended For Use As Inline Blowers For Wood Burners
