When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
3/4" x 1" x 18" Oil Hardening Flat Stock:
$33.27
Product Features:
- Thickness: 3/4"
- Width: 1"
- Overall Length: 18"
Tolerances:
- Thickness +/-.001”
- Width up to 8”, +.000/.005”
- Length: +1.25 / .250"
Description:
- O-1 Oil Hardening
- Stock is dimensional stable - use it for the most intricate work
- Deep hardening characteristics and fine grain structure
- Machines freely - fully spheroidized, annealed
Hardening:
It is recommended that stock be heated uniformly to 1450°-1500° F and quenched in oil. Temperature of the quenching oil should be 120°-140°F for best results. Do not quench in water because this is an oil hardening steel.
Tempering:For maximum toughness, a tempering time of one hour at temperature is recommended.
