When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
About this item:
【Better Driving Experience】Our LED bulbs increase 300% brightness and 100% view, focus beam pattern illuminates reveal road signs, without blinding other drivers
【450 Feet High Visibility】 Our LED bulbs centralized full beams, allowing you clearly see deer off to the side, avoid repair work and accident, take it easy through rural areas, deserted highways
【5 Years Lifespan】With heatproof glass coating chips, the bulbs can perform well even you drive 12 hours every night, it lasts 3 times longer than halogen, not dim within 5 years
【10 Minutes Installation】0.5-inch ultra-thin heat sink, fit for 99% of cars, even with a dust cover. Replace old broken bulbs by yourself can saving your precious time to repair
【6500K Eye-Protection Color】6500K Cool White, the vision is crisp clearer than 3500K Halogen, the color is more comfortable than 6500K Bluish light, reduce eyestrain in nighttime drivingProduct Details:
- Model: 9005 H7
- Voltage: DC12~30V
- Power: 40W
- Lumen: 4000LM
- Color Temperature: 6500K White
- LED Chips: AUIMSOCO customized CSP LED chips
- Material: aluminum
- Lifespan: 30,000 hours
- Waterproof Rate: IP67
- Operating Temperature: -45℃~+150℃
- Color: White(As the picture shows)
- Placement on Vehicle: Front, Left, Right
- Heat Dissipation Principle: Heat Pipe Technology + Aluminum Radiator + Fan cooling
Packing Including:2x LED Headlight Bulbs High Beam
2x LED Headlight Bulbs Low Beam
Install Caution:1. As a safety precaution, make sure that the car has had time to cool down properly before starting the installation process.2. Put the vehicle into park or make sure it is securely in gear.3. Make sure to have the ignition turned off and the keys removed.4. Be careful to avoid burns, especially when turning on or off the vehicles lighting.5. Be careful to avoid crushing or cutting the bulbs. Also make sure to not touch the bulbs with your fingers, as this will cause blotting.6. Fully examine the connection of the contact points, ports and the wires as faulty connections can cause lighting problems.7. Make certain that the end of the bulb does not come in contact with the interior light shield of the headlight when adjusting the bulb.
