5 HP 7/8" Shaft Single Phase Air Compressor Motor Electric Motor 3450 RPM 60Hz For Sale

Specification:Horsepower (HP): 5 HpAC Frequency Rating: 60 HzFrame Size:  143/5T  Base RPM: 3450RPM Volt: 208-230VINPUT:  4.6kWService Factor: 1.0Full Load Amps: 22-21Shaft Diameter: 7/8 inShaft Length: 2.25inShaft Type: KeyedENC: IP23FR: 143TAC Phase: Single PhaseReversible/Non-Reversible: Non-Reversible     ROT: CCWOverload: Yes / Manual reset buttonAdditional Product information:  Rigid Base  -  CL B Insulation 40 C / 104 F Ambient TempPackage includes:1*Air Compressor Motor

~~welcome to Air Compressor Duty Electric Motor 3450RPM Single Phase 7/8" Shaft 4.6KW

Product function starting amperage design to ensure the reduced voltage starting at rated load.
2.Equipped Manual thermal overload, capacitors and high quality ball bearings to ensure the lifetime.
3.Open drip-proof is better used in environment that are relatively clean and dry environments. Special design for Air Compressor duty. CCW only.
4.Special design for Air Compressor duty.
5.Motor is Non-Reversible CCW (Counter Clockwise) (HP): 5 Hp
AC Frequency Rating: 60 Hz
Frame Size: 143/5T
Base RPM: 3450RPM
Volt: 208-230V
INPUT: 4.6kW
Service Factor: 1.0
Full Load Amps: 22-21
Shaft Diameter: 7/8 in
Shaft Length: 2.25in
Shaft Type: Keyed
ENC: IP23
FR: 143T
AC Phase: Single Phase
Reversible/Non-Reversible: Non-Reversible
ROT: CCW
Overload: Yes / Manual reset button
Additional Product information: Rigid Base - CL B Insulation 40 C / 104 F Ambient Temp

Package includes:
1*Air Compressor all 5 hp motors are exactly the same. So, with the new motor you're purchasing, it's vitally important that you match up the specs on your old motor. All of the information you need to know can be found right on your electric motors nameplate/sticker, which usually can be found on the side of the motor.

Note:
1: Amperage
This is your electric motors TRUE power rating. HP ratings have been made suspect over the years by large retailers who like to use "peak HP" in their terminology. The Motor's amp rating does not lie. Please make sure your FL amp (FULL LOAD) rating on the motor you're replacing is within 10% of the FL Amp rating of the motor you intend to buy.
Example 1: If your current motor says 21 FL amps at 230VAC. Then you would be safe replacing your motor with a 19FL amp thru 23 FL amp electric motor 230volt.
Example 2: If your current motor says 21 FL amps at 230VAC. Then you replace it with a 15 FL amp motor. That 15A motor is NOT strong enough for the task, and will indefinitely fail.

2: Frame Size
The frame not only constitutes the bolt pattern, it also depicts the overall size and torque. The larger the frame, the stronger the motor. If your current motor you're replacing shows 56, 143T or 145T on the nameplate. Its extremely important that you replace it with that frame size. Improperly sized motors will inevitably result in motor failures.
Example: If your existing motor says 5HP 184T frame, and you elect to replace it with a 5HP 143/5Tframe.. That would be similar to using a 4 cylinder engine to power a school bus. This is why its important that your new motors frame size matches the old motor you're replacing. This will ensure your replacement motor will work for years to come.

3: Phase and Voltage
If your machine requires a 230volt electric motor on single phase power. You would want to incorporate a 1-phase 230vac electric motor for your application. 230V electric motors cannot handle voltages less than 208V. They will run too hot and you will experience motor failure.

4: RPM
Matching up the RPM is quite important. The wrong speed can damage your pump. The RPM does not have to match exactly, but you do need to be the neighborhood.
Example: 3510rpm, 3550, 3600 are all the same. They all fall under the umbrella of whats known as 3450RPM motors.

5: Shaft Diameter
With a tape measure. Measure the outside diameter on your electric motors shaft. By matching up the proper shaft diameter, you will be able to reuse the original motor pulley that came on your machine.

welcome to farzeenup !!!

Welcome to farzeenup ~ 💛

If you have any question , please contact us , and we will reply you as soon as possible. Thanks!!!

Welcome to farzeenup ~ 💛

If you have any question , please contact us , and we will reply you as soon as possible. Thanks!!!

PaymentDelivery detailsTerms of salesAbout usContact usPaymentWe accept payment 。Fees such as import duties, taxes are not included in the item price or shipping costs. These charges are the buyer's responsibility.Delivery detailsShipping:2-9 working days to: USATerms of sales

• We maintain high standards of excellence and strive for hundred percent customer satisfaction. response is very important to us. We hope that you contact us immediately before you give neutral or negative response, so that we can address your concerns. It is impossible to address issues if we do not know about them!

About usYour satisfaction is our ultimate goal. We work hard to earn your trust and future business. Our certified technicians have tested each item before shipping. The unit comes with 1 year limited warranty on all manufacturing defects.a) If you receive a defective item, you may return it or ask for a discount. Please contact us within 14 days after you receive the package.b) What you returned must be intact and in its original packaging as re? u. Customer is responsible for shipping costs of the returned item.c) We will cover the cost of shipping back t with the shipping rate indicated in the registration page. We will send you a new unit or refund the full payment you paid.Thank you.Contact usBusiness Hour Business Hour: Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with message.Please feel free to contact us if you have any questions. Monday To Friday: 8:30 AM to 5:00 PM (Beijing China time)Due to time zones, our reply to your questions may not be immediately. But within above working time, we will reply your email within 24 hours. If it's non-workdays, please kindly be patient and wait till Monday.Please contact us with message.Please feel free to contact us if you have any questions.95255SF1.053245Base RPM3450RPMBrandUnbrandedMPNDoes Not ApplyShaft Diameter7/8 inEnclosure TypeODP (Open Drip-Proof)Rated Load (HP)5Current TypeACNominal Rated Input Voltage208-230VAC PhaseSingle PhaseService Factor1.0IEC Frame Size143/5TAC Frequency Rating60 TypeKeyedMounting TypeBase-MountedCustom BundleNoFull Load Amps22-21DesignOpen Drip Proof (ODP)Input4.6kWPart TypeAir Compressor MotorSuitable ForAir Compressor ApplicationsShaft Length2.25inENCIP23FR143TROTCCWAC Motor TypeInduction/AsynchronousUPCDoes not applyNEMA Frame Suffix/Special Motor Construction/