When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
5 SETS 6MM MULTI-CONTACT MC4 PV CABLE CONNECTOR FOR SOLAR PANEL5 Sets of 6MM Multi-Contact MC4 PV Solar Cable Connectors
Read below on the deal on why all of these connectors are not created equal
Features:
- Brand new top quality
- Quick easy assembly
- Hot and cold temperature resistance
- Seal for waterproofing
- Tin plated copper contacts
Male/Female Connector Specifications:
- Multi-Contact MC4 Connector with Boot for 6-9mm OD #12AWG & #10 AWG PV Wire. This male connector has a negative polarity (-).
- Multi-Contact MC4 Connector with Boot for 6-9mm OD #12AWG #10AWG PV Wire. This female connector has a positive (+) polarity.
- Snap-in locking
- Locking by safety lock clip PV-SSH4 in accordance with NEC 2011, can be released only with tool
- For use on # 12AWG & #10AWG pv rated wire.
- Rated Voltage = 2000V DC (IEC) & 1000V DC (UL).
- Rated current IEC (90 Degrees C) = 30A (4mm, 6mm, 10 AWG).
- Test voltage = 6kV (50Hz, 1min.)
- Ambient temperature range = -40 C...+90 C (IEC) & -40 C...+ 75 C.
- Upper limiting temperature = 105 DegreesC (IEC)
- Overvoltage category / Pollution degree = CATIII / 3
- Contact resistance of plug connectors = 0,35mO
- Safety class = II
- Flame class = UL94-V0
- Ammonia resistance = 1500h, 70 C / 70% RH, 750ppm
- Salt mist spray test degree of severity 6 = EC 60068-2-52
Fact is some of the connectors for sale on outlets such as , Amazon and the internet in general are simply recycled plastic which allows connections to corrode in what we are seeing as little as 18 months. As a price point we understand the need to be as economical as possible however cheap does not necessarily mean value. See the reportbelowwritten on the use of generic connectors labeled as MC4.
Advanced Contact Technology
General statement by Multi-Contact on mating connectors of different make Multi-Contact clearly dissociates itself from connections made with MC connectors and connectors from other manufacturers due to the high demands placed on safety and reliability of PV installations. Connectors that have not been produced by MC but appear mate-able with MC components,and sometimes are being advertised as “compatible with MC” by the manufacturers do not meet the requirements for safe, stable electrical connections and must not be mated with MC connectors for safety reasons. Multi-Contact does not take any responsibility for damages that result from such connections which have not been approved by MC.
Loss of certification
The MC4 connectors made by Multi-Contact are TÜV certified only in combination with connectors from the MC4 product range. Any other connections are not TÜV recognized. When other manufacturers advertise a TÜV certified connection of their connectors with MC products, this does not refer to the connection as such. Only partial tests have been made in such cases.Technical risks and long-term performance No long-term experience is available with cross-mating from the field. Experts question the forecast capability of short-term tests and accelerated aging tests with regard to the quality of a connection over a time span of 25 years or more. PV connectors are safety components which contribute to the operational safety (both personal and functional) of the installation. When connectors of different make are mated, this aspect is not guaranteed. Contact elements and insulation elements must be perfectly matched to the last detail. Over along period of time this may only be ensured by continuous in-process tests which are run in- house by the manufacturer. Multi-Contact has been on the market with PV connector systems for over 15 years, looking back on according experience from both research and development as well as long-term performance of missions of connections. Simultaneously, characteristics of the connections are being recorded in test fields, proving a good long-term behaviour. For cross-mated connections this certainty is no longer given
Hurricane Wind Power
2019Corporate America Today2019 Best Off-GridRenewable EnergyProduct Supplier - USAUP TO 50% DISCOUNTSTOP accept payment by any of the following pay as soon as possible after winning an sale, as that will allow us to post your item to you sooner!
We offer Fast shipping on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Brand new top qualityQuick easy assemblyHot and cold temperature resistanceSeal for waterproofingTin plated copper contactsMale/Female Connector Specifications:Multi-Contact MC4 Connector with Boot for 6-9mm OD #12AWG & #10 AWG PV Wire. This male connector has a negative polarity (-).Multi-Contact MC4 Connector with Boot for 6-9mm OD #12AWG #10AWG PV Wire. This female connector has a positive (+) polarity.
Snap-in locking
Locking by safety lock clip PV-SSH4 in accordance with NEC 2011, can be released only with tool
For use on # 12AWG & #10AWG pv rated wire.
Rated Voltage = 2000V DC (IEC) & 1000V DC (UL).
Rated current IEC (90 Degrees C) = 30A (4mm, 6mm, 10 AWG).
Test voltage = 6kV (50Hz, 1min.)
Ambient temperature range = -40 C...+90 C (IEC) & -40 C...+ 75 C.
Upper limiting temperature = 105 DegreesC (IEC)
Overvoltage category / Pollution degree = CATIII / 3
Contact resistance of plug connectors = 0,35mO
Safety class = II
Flame class = UL94-V0
Ammonia resistance = 1500h, 70 C / 70% RH, 750ppm
Salt mist spray test degree of severity 6 = EC 60068-2-52
Fact is some of the connectors for sale on outlets such as , Amazon and the internet in general are simply recycled plastic which allows connections to corrode in what we are seeing as little as 18 months. As a price point we understand the need to be as economical as possible however cheap does not necessarily mean value. See the reportbelowwritten on the use of generic connectors labeled as MC4
Advanced Contact Technology
General statement by Multi-Contact on mating connectors of different make Multi-Contact clearly dissociates itself from connections made with MC connectors and connectors from other manufacturers due to the high demands placed on safety and reliability of PV installations. Connectors that have not been produced by MC but appear mateable with MC components,and sometimes are being advertised as “compatible with MC” by the manufacturers do not meet the requirements for safe, stable electrical connections and must not be mated with MC connectors for safety reasons. Multi-Contact does not take any responsibility for damages that result from such connections which have not been approved by MC.
Loss of certification
The MC4 connectors made by Multi-Contact are TÜV certified only in combination with connectors from the MC4 product range. Any other connections are not TÜV recognized. When other manufacturers advertise a TÜV certified connection of their connectors with MC products, this does not refer to the connection as such. Only partial tests have been made in such cases.Technical risks and long-term performance No long-term experience is available with cross-mating from the field. Experts question the forecast capability of short-term tests and accelerated aging tests with regard to the quality of a connection over a time span of 25 years or more. PV connectors are safety components which contribute to the operational safety (both personal and functional) of the installation. When connectors of different make are mated, this aspect is not guaranteed. Contact elements and insulation elements must be perfectly matched to the last detail. Over along period of time this may only be ensured by continuous in-process tests which are run in- house by the manufacturer. Multi-Contact has been on the market with PV connector systems for over 15 years, looking back on according experience from both research and development as well as long-term performance of missions of connections. Simultaneously, characteristics of the connections are being recorded in test fields, proving a good long-term behaviour. For cross-mated connections this certainty is no longer given
Froo | Froo Cross Sell, Free Cross Sell, Cross promote, Marketing, listing Apps, Apps, ApplicationHurricane Wind Power
2019Corporate America Today2019 Best Off-GridRenewable EnergyProduct Supplier - USAUP TO 50% DISCOUNTSTOP BRANDS
Shipping
We offer Fast shipping on all orders!
Your order will be dispatched within 1-3 working day of receiving payment (Monday-Friday) and you should expect to receive it one or two days after dispatch (for orders sent RM 1st Class).
In the very unlikely event that your item is lost or damaged during post, then WE are responsible and will issue either a full refund or replacement.
Returns
If you are not 100% satisfied with your purchase, you can return the product and get a full refund or exchange the product for another one, be it similar or not.
You can return a product for up to 14 days from the date you purchased it.
Any product you return must be in the same condition you received it and in the original packaging. Please keep the receipt.
Thank you for visiting our store!5 Sets of 6MM Multi-Contact MC4 PV Solar Cable ConnectorsRead below on the deal on why all of these connectors are not created equalFeatures:
- Brand new top quality
- Quick easy assembly
- Hot and cold temperature resistance
- Seal for waterproofing
- Tin plated copper contacts
Male/Female Connector Specifications:Multi-Contact MC4 Connector with Boot for 6-9mm OD #12AWG & #10 AWG PV Wire. This male connector has a negative polarity (-).Multi-Contact MC4 Connector with Boot for 6-9mm OD #12AWG #10AWG PV Wire. This female connector has a positive (+) polarity.
Snap-in locking
Locking by safety lock clip PV-SSH4 in accordance with NEC 2011, can be released only with tool
For use on # 12AWG & #10AWG pv rated wire.
Rated Voltage = 2000V DC (IEC) & 1000V DC (UL).
Rated current IEC (90 Degrees C) = 30A (4mm, 6mm, 10 AWG).
Test voltage = 6kV (50Hz, 1min.)
Ambient temperature range = -40 C...+90 C (IEC) & -40 C...+ 75 C.
Upper limiting temperature = 105 DegreesC (IEC)
Overvoltage category / Pollution degree = CATIII / 3
Contact resistance of plug connectors = 0,35mO
Safety class = II
Flame class = UL94-V0
Ammonia resistance = 1500h, 70 C / 70% RH, 750ppm
Salt mist spray test degree of severity 6 = EC 60068-2-52
Fact is some of the connectors for sale on outlets such as , Amazon and the internet in general are simply recycled plastic which allows connections to corrode in what we are seeing as little as 18 months. As a price point we understand the need to be as economical as possible however cheap does not necessarily mean value. See the reportbelowwritten on the use of generic connectors labeled as MC4
Advanced Contact Technology
General statement by Multi-Contact on mating connectors of different make Multi-Contact clearly dissociates itself from connections made with MC connectors and connectors from other manufacturers due to the high demands placed on safety and reliability of PV installations. Connectors that have not been produced by MC but appear mateable with MC components,and sometimes are being advertised as “compatible with MC” by the manufacturers do not meet the requirements for safe, stable electrical connections and must not be mated with MC connectors for safety reasons. Multi-Contact does not take any responsibility for damages that result from such connections which have not been approved by MC.
Loss of certification
The MC4 connectors made by Multi-Contact are TÜV certified only in combination with connectors from the MC4 product range. Any other connections are not TÜV recognized. When other manufacturers advertise a TÜV certified connection of their connectors with MC products, this does not refer to the connection as such. Only partial tests have been made in such cases.Technical risks and long-term performance No long-term experience is available with cross-mating from the field. Experts question the forecast capability of short-term tests and accelerated aging tests with regard to the quality of a connection over a time span of 25 years or more. PV connectors are safety components which contribute to the operational safety (both personal and functional) of the installation. When connectors of different make are mated, this aspect is not guaranteed. Contact elements and insulation elements must be perfectly matched to the last detail. Over along period of time this may only be ensured by continuous in-process tests which are run in- house by the manufacturer. Multi-Contact has been on the market with PV connector systems for over 15 years, looking back on according experience from both research and development as well as long-term performance of missions of connections. Simultaneously, characteristics of the connections are being recorded in test fields, proving a good long-term behaviour. For cross-mated connections this certainty is no longer given
Froo | Froo Cross Sell, Free Cross Sell, Cross promote, Marketing, listing Apps, Apps, Application
