When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
60,000 BTU Dual Zone Ductless Mini Split AC
60000 BTU Ductless Mini Split Air Conditioner
With a 60000 BTU total Cooling Capacity, this Dual Zone mini split AC can cool TWO separate zones (2 x 30000 BTU) for a total coverage area of 2600 ft² (TWO SEPARATE 1300 ft² AREAS). 13-SEER energy efficiency provides the benefits of low operation temps, rapid cooling / heating, as well as maximum energy efficiency. R410A Pre-charged - 2 X 25\' Install kits Included. (THIS IS A COOL ONLY SYSTEM)
System Features Specifications Installation Kit Setup - Installation Warranty Shipping
Technical Data:System Includes:
- 60000 BTU Cooling Capacity: (30k + 30k)
- 13 SEER Efficiency ~ Pre-charged w/ Eco-Friendly R-410A.
- Dual-Zone Setup (2 Air Handlers)
- 1 Year Warranty on all Parts View Details >
- 5 Year Warranty on Compressor View Details >
- Indoor Units - Air Handler [x 2]
- Outdoor Unit (condenser).
- Digital, Multi-function LCD Remote Control [x 2]
- Installation Kits [x 2] and Product Manual.
- Filtration Screens - Multi Folds Evaporator.
Top Line Features:
Dual Air Handlers for Multi-Zone Placement.Intelligent Mechanical Defrosting.Washable Filters - Biologically Active Enzyme.Low Startup Temps - MAXIMUM EFFICIENCY.Pre-charged w/ R-410A Freon For 25\' [x2] of Piping.Sleep Mode - 24 hour ON/OFF Timer - Memories.Enhanced Copper Coil - Wide Angle Air Spread.Over Current and Thermal Protection.Flexible, Quick Installation - Easy Operation.
THIS IS A COOL ONLY SYSTEM DIGITAL LED DISPLAY:
With its integrated INTELLIGENT CONTROL system you can choose from a variety of functions and settings. The digital LED information display center of the indoor unit provides real-time information relative to the operation of the unit, and the environment. LCD Remote Controls x 2:
Settings and features are conveniently controlled with 2 LCD Digital Remote Controls. 1 Included for Each Zone. Additional remotes available for $35 a piece
High Efficiency and Environmentally Friendly:
The R410A refrigerant enables high efficiency of the unit while preserving the ozone layer. This is another testament to our dedication to environmentally friendly products. Multi-Folds Evaporator:
Enlarges the heat dissipation surface area; enhancing the efficiency and making the unit more compact in size. Three Dimensional Swinging Pattern Air Delivery Technology:
Multi-dimensional wind-outlet and the dual swinging louvers will uniformly spread the cool air to reach every corner of room. Good Sleep Mode Operation:
With the touch of a button, your ductless split air conditioner is set to automatically adjust the room temperature during your sleep. Superior Inner-Grooved Copper Tubing:
Enables a much faster refrigerant flow, increasing the heat exchange efficiency by 30-50% over the traditional smooth copper tubing. Integrated Dual Particle Filter (Washable):
Anti-mold dust/particle filters under the front panel cover provide for fresher air circulation. They are removable and washable. Saw Tooth Fan Wheel Design for Noise Reduction:
The latest design adopts the air flow blades in the shape of saw teeth, which greatly reduces the vibration noises at the end of the vortex, ensuring a quiet operation of the unit.
System Specifications:
Cooling Capacities: (BTU\'s)60,000 (30,000 x 2)SEER: (Energy Efficiency)13.0Timer Settings: 1-24 HoursIndoor Airflow:765 cfm [x 2]Moisture Removal: (Pints / Hour)7.6 [x 2]Thermostat:61° F – 88° FInside Noise Output:44dB(A)Outside Noise Output:53-55 dB(A)Zones: (Air Handlers)DUALCompressor Brand:SanyoCompressor Type:RotaryRefrigerant:R-410AOutdoor Motor Airflow:5450 cfmIndoor (air handler) Dimensions:49\" W x 9\" D x 13\" HIndoor (air handler) Weights:61 lbs. / eachOutdoor (condensor) Dimensions:37\" W x 17\" D x 49\" H Outdoor (condensor) Weight:220 lbs.
Electrical Info:
Power Supply (VAC):230 / 208 - 60HzTotal Current: 32.4 Amps [16.2 x 2]MCA: 39.6 AmpsMOP: (breaker size) 60 AmpsCompressor RLA:29 AmpsCompressor LRA:140 Amps
Piping - Install Kit Info:
Tubing / Pipeing Included:50 Feet (25 ft. x 2)Ref. Pipe Size (liquid - gas):3/8\" - 3/4\" [x 2]Drain Pipe Size (ID / OD):1/2\" - 3/4\"Max Pipe Lengths:85 ft. / eachMax Lift / Drop: 25 ft.
Install Kit Contents:
25 Feet Flared Insulated Copper Tubing x 225 Feet Pipe Insulation x 2Indoor Mounting Brackets x 2
Drain Pipe (outdoor)Defrost WireWire Harness Between Indoor & Outdoor x 2Remote Control w/ Wall Brackets & Batteries x 2 ***Extend one or both of the two (2) included 25 foot line sets to a total length of 50 feet. Just $99 per 25\' extension.*** BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 - 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with R410A Freon however, procedures such as conducting leak tests etc. are still important steps in ensuring proper functioning of a split AC. *Although installation may seem easy to some, certain tools and experience is necessary to complete setup of a mini split* Click for Installation Tip. It is highly advised a certified HVAC technician complete installation to be eligible for warranty. See warranty details below >
*5 Year Compressor - 1 Year on all other Parts* Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship. Even though mini split setup is below the expertise requirements of central AC systems, these are not \"plug-n-play\" units that can be properly installed without certain tools any prior HVAC - electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns. Warranty service - troubleshooting is provided through the contractor / installer and will be upheld as long as policies are observed. Once a non-defective unit is installed by a HVAC company, chances of anything going wrong are very slim and almost all contractors will guarantee there workmanship and provide future service free of charge (installation warranty). If it was determined that the unit is not functioning due to a defect and needs to be replaced, the part will be sent free of charge up to 2 year from date of purchase or 5 years for compressor. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. Damaged / Defective product will be picked up and brand new exchange will be shipped out. Download Manual - Warranty Polices >
These multi-zone mini split units ship out of Missouri via YRC Freight or via a similar freight service, and under normal conditions, are loaded and in transit within 2 business days from payment receipt. Depending on where you are geographically located, transit time from this point varies, but typically amounts to 2-5 business days. Please provide a contact phone # upon checkout where recipient of order can be reached. SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. This unit can only be shipped to addresses within the Contiguous USA (lower 48 states).
View the Mini Split FAQ >View the Mini Split Outline Diagram >Click to contact us >
