When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
PLEASE READ DESCRIPTION THOROUGHLY and LOOK AT ALL THE PHOTOS
This sale is for a flat can motor upgrade kit for HO scale AHM Rivarossi 4-6-2 and 4-6-4 steam locomotives only. This motor kit is intended for theearly version locomotives with the square motor or the later round motor mounted in the cab. NOTE! Be sure to check to see if your engine has a square motor or a round motorin the cab before purchasing this kit. This kit WILL NOT WORK innew red box versions of locomotives that have a gold colored flat can motor mounted inside the boiler.
If you need to repower a Rivarossi 2-8-2, 2-8-4, or 2-10-2 locomotives, or articulated locomotives, please see my other motor kit WILL NOT WORK in the GG1, E8, U23C, or Kraus Maffei locomotives.
If you have any questions please contact me before purchasing this kit.
This motor kit will provide smoother low speed operation, A LOWER TOP SPEEDand operating noise will be reduced.
This motor kit IS NOT recommended for large or articulated AHM Rivarossi steam locomotives. I have motor kits for these locomotives, please see my other sales.
If you have any questions please contact me.
The motor measures 25mm long x 20mm high x 15mm wide, the motor shaft is 8mm long and 2mm in diameter. At 12 volts DC with no load the motor draws 50ma and develops 7600 rpm, the stall current is 800ma. This motor will start turning smoothly on 1 volt DC. This motor is DCC compatible.
The photo shows what the motor kit would look like installed on a Rivarossi 4-6-2 Pacific chassis.PLEASE NOTE: The chassis that is shown in the photo ISNOT included with the motor kit. This is an unassembled kit
If you have any questions please contact me before purchasing this kit.
Installation time is about 2 hours. The motor kit consists of 1 flat can motor, new flexible coupling, hook up wire, and illustrated installation instructions. Please note, the instructions provided with the kit are for a 4-6-2 or 4-6-4 chassis.
If you have any questions, please contact me.
The motor kit will be shipped via USPS First Class Mail.
Note to international buyers: determines the rates for international shipping, not me. I have no control over what charges for international shipping.
Thanks for looking.
