American Stand 40,000 BTU 80% Upflow/Horz Natural Gas Furnace-AUE1A040A9241A For Sale

Model No. H 40" x W 14.5" x D lbs

Standard Features

• NATURAL GAS MODELS — Central heating furnace designs are certified to ANSI Z21.47 / CSA 2.3 for both natural and L.P. gas. Limit setting and rating data were established and approved under standard rating conditions using American National Standards Institute standards.

• SAFE OPERATION — The Integrated System Control has solid state devices, which continuously monitor for presence of flame, when the system is in the heating mode of operation. Dual solenoid combination gas valve and regulator provide extra safety.

• QUICK HEATING— Durable, cycle tested, heavy gauge aluminized steel heat exchanger quickly transfers heat to provide warm conditioned air to the structure. Low energy power vent blower, to increase efficiency and provide discharge of gas fumes to the outside, allows common venting with hot water heater. Mechanical Specifications
  

• BURNERS — Multi-port, in-shot burners will give years of quiet and efficient service. All models can be converted to L.P. gas without changing burners.

• INTEGRATED SYSTEM CONTROL— Exclusively designed operational program provides total control of furnace limit sensors, blowers, gas valve, flame control and includes self diagnostics for ease of service.

• AIR DELIVERY — The multispeed, directdrive blower motor, with sufficient airflow range for most heating and cooling requirements, will switch from heating to cooling speeds on demand from room thermostat. The blower door safety switch will prevent or terminate furnace operation when the blower door is removed. (Fan relay and 35VA control transformer is standard).

• STYLING — Heavy gauge steel and "wraparound" cabinet construction is used in the cabinet with baked-on enamel finish for strength and beauty. The heat exchanger section of the cabinet is completely lined with foil-faced fiberglass insulation. This results in quiet and efficient operation due to the excellent acoustical and insulating qualities of fiberglass.

• FEATURES AND GENERAL OPERATION — These High Efficiency Gas Furnaces employ a Hot Surface Ignition system, which eliminates the waste of a constantly burning pilot. The integrated system control lights the main burners upon a demand for heat from the room thermostat. Complete front service access. a. Low energy power venter. b. Vent proving differential Us

  • All orders can be picked up at our warehouse in Paw Paw, MI
    • Monday - Friday 8:30am to 5pm.
      
  • Shipping within the 48 Contiguous United States ONLY
  • No International Shipping
  • No Delivery to Alaska or Hawaii
  • No APO/FPO Delivery
  • Flat Rate Freight includes complimentary lift gate delivery.
  • Please provide a contact phone number when checking out; this will help us insure that your package arrives safely and on time. In the event that you would like to return your purchase, we allow returns that are processed within the defined return date (the return date is to be found in the return policy/shipping and handling section). All items must be returned in their unpopend original product packaging.
    

    
    

    - Buyer is responsible for all return shipping charges.
    

    
    

    - Original shipping charges are nonrefundable.

    
    

    - Please contact us if you have any questions or would like to return your purchase.

    
    

    - We advise you to use a reputable carrier service when returning your goods. Please pack all returns appropriately.

    Simply click on the 'Buy It Now' button and follow the checkout steps. Select Payments as the payment method and then will be given the chance to enter your card details in to s secure checkout in order to pay for your order. Once the payment has been made your order will be processed as soon as possible.
    

    
    

    Should there be a problem with payment please do let us know.

    
    

    Customer satisfaction is very important to us. If you have any problem with your order,please contact us and we will do our best to make you satisfied, please do not leave a negative response before we resolve your problem.
    

    
    We guarantee that your issue will be solved quickly.

    
    Your response is very important to us it affects our search placement on . We will leave a positive response for you in return automatically once we receive your response.
    

    Fleetwood's is a Family-owned business with over 45 years of experience in the HVAC industry. We pride ourselves on offering the best products, prices and services possible.
    

    
    

    We know times are tough, but we're willing to work with you. Just click the "Make Offer" button at the top of the page and let us know what your willing to pay for it. If it is a fair price, you might just strike a deal! you have any queries, please contact us via . We usually respond within 24 hours on weekdays.

    Thank you for visiting our store!

    Standard Features Model No. AUE1A040A9241A Dimensions: H 40" x W 14.5" x D 28-3/4" Weight: 155 lbs Standard Features NATURAL GAS MODELS — Central heating furnace designs are certified to ANSI Z21.47 / CSA 2.3 for both natural and L.P. gas. Limit setting and rating data were established and approved under standard rating conditions using American National Standards Institute standards. SAFE OPERATION — The Integrated System Control has solid state devices, which continuously monitor for presence of flame, when the system is in the heating mode of operation. Dual solenoid combination gas valve and regulator provide extra safety. QUICK HEATING— Durable, cycle tested, heavy gauge aluminized steel heat exchanger quickly transfers heat to provide warm conditioned air to the structure. Low energy power vent blower, to increase efficiency and provide discharge of gas fumes to the outside, allows common venting with hot water heater. Mechanical Specifications BURNERS — Multi-port, in-shot burners will give years of quiet and efficient service. All models can be converted to L.P. gas without changing burners. INTEGRATED SYSTEM CONTROL— Exclusively designed operational program provides total control of furnace limit sensors, blowers, gas valve, flame control and includes self diagnostics for ease of service. AIR DELIVERY — The multispeed, directdrive blower motor, with sufficient airflow range for most heating and cooling requirements, will switch from heating to cooling speeds on demand from room thermostat. The blower door safety switch will prevent or terminate furnace operation when the blower door is removed. (Fan relay and 35VA control transformer is standard). STYLING — Heavy gauge steel and "wraparound" cabinet construction is used in the cabinet with baked-on enamel finish for strength and beauty. The heat exchanger section of the cabinet is completely lined with foil-faced fiberglass insulation. This results in quiet and efficient operation due to the excellent acoustical and insulating qualities of fiberglass. FEATURES AND GENERAL OPERATION — These High Efficiency Gas Furnaces employ a Hot Surface Ignition system, which eliminates the waste of a constantly burning pilot. The integrated system control lights the main burners upon a demand for heat from the room thermostat. Complete front service access. a. Low energy power venter. b. Vent proving differential switch

    American Stand 40,000 BTU 80% 

    Upflow Horizontal Natural Gas Furnace-AUE1A040A9241AFast ShippingGreat Customer SupportSatisfaction Features

  • Model No. H 40" x W 14.5" x D lbs

  • Standard Features

    • NATURAL GAS MODELS — Central heating furnace designs are certified to ANSI Z21.47 / CSA 2.3 for both natural and L.P. gas. Limit setting and rating data were established and approved under standard rating conditions using American National Standards Institute standards.

    • SAFE OPERATION — The Integrated System Control has solid state devices, which continuously monitor for presence of flame, when the system is in the heating mode of operation. Dual solenoid combination gas valve and regulator provide extra safety.

    • QUICK HEATING— Durable, cycle tested, heavy gauge aluminized steel heat exchanger quickly transfers heat to provide warm conditioned air to the structure. Low energy power vent blower, to increase efficiency and provide discharge of gas fumes to the outside, allows common venting with hot water heater. Mechanical Specifications
      

    • BURNERS — Multi-port, in-shot burners will give years of quiet and efficient service. All models can be converted to L.P. gas without changing burners.

    • INTEGRATED SYSTEM CONTROL— Exclusively designed operational program provides total control of furnace limit sensors, blowers, gas valve, flame control and includes self diagnostics for ease of service.

    • AIR DELIVERY — The multispeed, directdrive blower motor, with sufficient airflow range for most heating and cooling requirements, will switch from heating to cooling speeds on demand from room thermostat. The blower door safety switch will prevent or terminate furnace operation when the blower door is removed. (Fan relay and 35VA control transformer is standard).

    • STYLING — Heavy gauge steel and "wraparound" cabinet construction is used in the cabinet with baked-on enamel finish for strength and beauty. The heat exchanger section of the cabinet is completely lined with foil-faced fiberglass insulation. This results in quiet and efficient operation due to the excellent acoustical and insulating qualities of fiberglass.

    • FEATURES AND GENERAL OPERATION — These High Efficiency Gas Furnaces employ a Hot Surface Ignition system, which eliminates the waste of a constantly burning pilot. The integrated system control lights the main burners upon a demand for heat from the room thermostat. Complete front service access. a. Low energy power venter. b. Vent proving differential orders can be picked up at our warehouse in Paw Paw, MI

      • Monday - Friday 8:30am to 5pm.
        
    • Shipping within the 48 Contiguous United States ONLY
    • No International Shipping
    • No Delivery to Alaska or Hawaii
    • No APO/FPO Delivery
    • Flat Rate Freight includes complimentary lift gate delivery.
    • Please provide a contact phone number when checking out; this will help us insure that your package arrives safely and on time. In the event that you would like to return your purchase, we allow returns that are processed within the defined return date (the return date is to be found in the return policy/shipping and handling section). All items must be returned in their unpopend original product packaging.
      

      
      

      - Buyer is responsible for all return shipping charges.
      

      
      

      - Original shipping charges are nonrefundable.

      
      

      - Please contact us if you have any questions or would like to return your purchase.

      
      

      - We advise you to use a reputable carrier service when returning your goods. Please pack all returns appropriately.

      Payment

      Simply click on the 'Buy It Now' button and follow the checkout steps. Select Payments as the payment method and then will be given the chance to enter your card details in to s secure checkout in order to pay for your order. Once the payment has been made your order will be processed as soon as possible.
      

      
      

      Should there be a problem with payment please do let us know.

      
      

      response

      Customer satisfaction is very important to us. If you have any problem with your order,please contact us and we will do our best to make you satisfied, please do not leave a negative response before we resolve your problem.
      

      
      We guarantee that your issue will be solved quickly.

      
      Your response is very important to us it affects our search placement on . We will leave a positive response for you in return automatically once we receive your is a Family-owned business with over 45 years of experience in the HVAC industry. We pride ourselves on offering the best products, prices and services possible.
      

      
      

      We know times are tough, but we're willing to work with you. Just click the "Make Offer" button at the top of the page and let us know what your willing to pay for it. If it is a fair price, you might just strike a deal! Us

      If you have any queries, please contact us via . We usually respond within 24 hours on weekdays.

      Thank you for visiting our store!

      • Standard Features

      • Model No. H 40" x W 14.5" x D lbs

      • Standard Features

        • NATURAL GAS MODELS — Central heating furnace designs are certified to ANSI Z21.47 / CSA 2.3 for both natural and L.P. gas. Limit setting and rating data were established and approved under standard rating conditions using American National Standards Institute standards.

        • SAFE OPERATION — The Integrated System Control has solid state devices, which continuously monitor for presence of flame, when the system is in the heating mode of operation. Dual solenoid combination gas valve and regulator provide extra safety.

        • QUICK HEATING— Durable, cycle tested, heavy gauge aluminized steel heat exchanger quickly transfers heat to provide warm conditioned air to the structure. Low energy power vent blower, to increase efficiency and provide discharge of gas fumes to the outside, allows common venting with hot water heater. Mechanical Specifications
          

        • BURNERS — Multi-port, in-shot burners will give years of quiet and efficient service. All models can be converted to L.P. gas without changing burners.

        • INTEGRATED SYSTEM CONTROL— Exclusively designed operational program provides total control of furnace limit sensors, blowers, gas valve, flame control and includes self diagnostics for ease of service.

        • AIR DELIVERY — The multispeed, directdrive blower motor, with sufficient airflow range for most heating and cooling requirements, will switch from heating to cooling speeds on demand from room thermostat. The blower door safety switch will prevent or terminate furnace operation when the blower door is removed. (Fan relay and 35VA control transformer is standard).

        • STYLING — Heavy gauge steel and "wraparound" cabinet construction is used in the cabinet with baked-on enamel finish for strength and beauty. The heat exchanger section of the cabinet is completely lined with foil-faced fiberglass insulation. This results in quiet and efficient operation due to the excellent acoustical and insulating qualities of fiberglass.

        • FEATURES AND GENERAL OPERATION — These High Efficiency Gas Furnaces employ a Hot Surface Ignition system, which eliminates the waste of a constantly burning pilot. The integrated system control lights the main burners upon a demand for heat from the room thermostat. Complete front service access. a. Low energy power venter. b. Vent proving differential