When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Inkbird temperature controller is a pre-wired heating thermostat with timing function, especially for the reptile breeding, incubation and cultivation.
[Convenient Design] Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
[Dual Display Window] Be able to display measured temperature and set temperature at the same time.
[Different Functions] Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
[Only Heating] Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
[Dual Time Cycle Setting] Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
[Package Content] 1x ITC-306T Controller+1x Rubber Probe
| US Socket
*Input Power Cable Length: 1.5m (5ft)
*Output Power Cable Length: 25cm (1ft)
*Body Dimension: 140x68x33mm (5.5x2.7x1.3 inch.)
*Socket Dimension: 85x42x24mm (3.3x1.7x1 inch.)
*Service:1 Year
| Rubber Probe
*Temperature Control Mode:On/Off Control, Heating
*Waterproof level: IP68
*Sensor Length: 2m / 6.56ft
*Ambient Temperature: -30~ 75 °C / -22~ 167 °F
*Storage Temperature: -20~ 60 °C / -4~ 140 °F
| Digital Thermostat
*Temperature Control Output: Max. 10A, 120V AC
*Relay Contact Capacity: Heating (10A, 100-240VAC)
*Temperature Resolution: 0.1° C/0.1° F
*Temperature Accuracy: ±1°C (-50 ~ 70°C) ±1°F (-50 ~ 160° F)
Inkbird temperature controller is a pre-wired heating thermostat with timing function, especially for the reptile breeding, incubation and cultivation.
[Convenient Design] Plug and play, easy to use. Support reading with Centigrade or Fahrenheit.
[Dual Display Window] Be able to display measured temperature and set temperature at the same time.
[Different Functions] Temperature calibration, over-temperature and sensor fault alarm. Maximum output load: 1200W (110V).
[Only Heating] Temperature Control Mode: On/Off Control. Please note it is only heating controller without cooling function. Both of the plugs can control the heating. But totally could not over 1200W.
[Dual Time Cycle Setting] Can be set different temperature from day and night on the basis of the physical needs of animals and plants during 24 hours.
[Package Content] 1x ITC-306T Controller+1x Rubber Probe
Different temperatures can be set during the day and night. For example, keep the temperature between 20 and 22°C between 8:00 a.m. and 6:00 p.m. and between 24 and 26°C between 6:00 p.m. and 8:00 a.m
| US Socket
*Input Power Cable Length: 1.5m (5ft)
*Output Power Cable Length: 25cm (1ft)
*Body Dimension: 140x68x33mm (5.5x2.7x1.3 inch.)
*Socket Dimension: 85x42x24mm (3.3x1.7x1 inch.)
*Service:1 Year
| Rubber Probe
*Temperature Control Mode:On/Off Control, Heating
*Waterproof level: IP68
*Sensor Length: 2m / 6.56ft
*Ambient Temperature: -30~ 75 °C / -22~ 167 °F
*Storage Temperature: -20~ 60 °C / -4~ 140 °F
| Digital Thermostat
*Temperature Control Output: Max. 10A, 120V AC
*Relay Contact Capacity: Heating (10A, 100-240VAC)
*Temperature Resolution: 0.1° C/0.1° F
*Temperature Accuracy: ±1°C (-50 ~ 70°C) ±1°F (-50 ~ 160° F)