When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
with Tomahawk Drift x 1, Hawk head, handle and bolster plate not included. These are being used by many master hawk makers. Suitable for Knifemakers, blacksmith, hawk makers and so on. Fit most handle suppliers.2.Material:These tools are made of tough ductile iron. Blacksmith wax coated withstand extreme forces and temperatures. Proven to be very reliable and let your drift last for many years3.Size:The tomahawk drift tool measures around 10.8'' long with oval eye of 1'' x 0.9'' and 0.7'' at the small end. Best Motors
Best choice of motor parts
Blacksmith Forged Axe Eye Drift Mandrel Blacksmith Tool Blacksmith Drift Tool
with Tomahawk Drift x 1, Hawk head, handle and bolster plate not included. These are being used by many master hawk makers. Suitable for Knifemakers, blacksmith, hawk makers and so on. Fit most handle suppliers.
2.Material:These tools are made of tough ductile iron. Blacksmith wax coated withstand extreme forces and temperatures. Proven to be very reliable and let your drift last for many years
3.Size:The tomahawk drift tool measures around 10.8'' long with oval eye of 1'' x 0.9'' and 0.7'' at the small end.
4.Benefits:The drift is tear drop shaped to form the hole needed to handle hand made tomahawks, hammers, etc. These must-have drift tools for blacksmiths will help you get the job done easier and faster, improving efficiency and quality.
5.Easy to Use: Drill a series of small holes close to the center of the workpiece to be drifted. Once the holes are drilled, heat the piece and split with a cold chisel or similar tool. Then, the piece is heated again and the drifters are driven into the holes. While continuing to drive the drifters into the workpiece, tap the sides of the workpiece until the drifters' holes reach the desired measurement. The heating process may take several times to obtain the desired to Forge a Tomahawk
For Drifted Eye
Step 1: The process used by most blacksmiths involves drilling a series of small holes as close together as possible in the center of the workpiece to be drifted.
Step 2: Once the holes are drilled, the piece is heated and then split with a cold chisel or similar tool.
Step 3: After splitting, the piece is heated again and the drifters are driven into the holes.
Step 4: While continuing to drive the drifters into the workpiece, tap the sides of the workpiece until the drifters' holes reach the desired measurement.
Step 5: The heating process may take several times to obtain the desired shape.
For Wrapped Eye
Step 1: Fold the tomahawk into“U” shape.
Step 2: Insert Carbon bit and prepare for welding.
Step 3: Flux!
Step 4: Weld. Then, fuller and spread the tomahawk blade.
Step 5: Refine profile and the eye of the tomahawk.
Step 6: Draw length of tomahawk blade. Trim excess steel.
Item SpecificsBrand LEE-AutoWarranty 1 YearManufacturer Part Number Does Not ApplyType Blacksmith Drift Tool Eye DriftCompatible For BlacksmithMaterial Alloy Steel
#Payment
1. Payment methods accepted: Payoneer, Paypal, Credit Card, Debit Card and many other mothods.
#Shipping
1. We ship items to Your address, it cannot be changed once the order shipped out.
2. Delivery time depends on destination and other factors(custom office & natural calamities),please feel free to contact us by email if you cannot get your order on time.
#Returns
1. Return item within 30 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.And all NON-seller mistake returns for refund are subject to 20% re-stocking fee.
3. If return is needed, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
#response
1. We maintain high standards of excellence Four 5-star rating and strive for 100% customer satisfaction! Positive response is very important to us.
2. If you are not satisfied with our product or our Service, please feel free to contact us immediately BEFORE you leave neutral or negative response, we will try our best to resolve any problem and make you satisfied.
#Contact Us
Please contact us via using"Contact member". We will respond within 1 business day or less. Thank you for your understanding.
Our office hours is as below :
- 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
- 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday
And our office is closed on Sunday and public holidays (Hong Kong)
We apologize for the late reply during the holidays.
Best Motors
Best choice of motor parts
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Blacksmith Forged Axe Eye Drift Mandrel Blacksmith Tool Blacksmith Drift Tool
with Tomahawk Drift x 1, Hawk head, handle and bolster plate not included. These are being used by many master hawk makers. Suitable for Knifemakers, blacksmith, hawk makers and so on. Fit most handle suppliers.
2.Material:These tools are made of tough ductile iron. Blacksmith wax coated withstand extreme forces and temperatures. Proven to be very reliable and let your drift last for many years
3.Size:The tomahawk drift tool measures around 10.8'' long with oval eye of 1'' x 0.9'' and 0.7'' at the small end.
4.Benefits:The drift is tear drop shaped to form the hole needed to handle hand made tomahawks, hammers, etc. These must-have drift tools for blacksmiths will help you get the job done easier and faster, improving efficiency and quality.
5.Easy to Use: Drill a series of small holes close to the center of the workpiece to be drifted. Once the holes are drilled, heat the piece and split with a cold chisel or similar tool. Then, the piece is heated again and the drifters are driven into the holes. While continuing to drive the drifters into the workpiece, tap the sides of the workpiece until the drifters' holes reach the desired measurement. The heating process may take several times to obtain the desired to Forge a Tomahawk
For Drifted Eye
Step 1: The process used by most blacksmiths involves drilling a series of small holes as close together as possible in the center of the workpiece to be drifted.
Step 2: Once the holes are drilled, the piece is heated and then split with a cold chisel or similar tool.
Step 3: After splitting, the piece is heated again and the drifters are driven into the holes.
Step 4: While continuing to drive the drifters into the workpiece, tap the sides of the workpiece until the drifters' holes reach the desired measurement.
Step 5: The heating process may take several times to obtain the desired shape.
For Wrapped Eye
Step 1: Fold the tomahawk into“U” shape.
Step 2: Insert Carbon bit and prepare for welding.
Step 3: Flux!
Step 4: Weld. Then, fuller and spread the tomahawk blade.
Step 5: Refine profile and the eye of the tomahawk.
Step 6: Draw length of tomahawk blade. Trim excess steel.
Item SpecificsBrand :LEE-AutoWarranty :1 YearManufacturer Part Number :Does Not ApplyType :Blacksmith Drift Tool Eye DriftCompatible :For BlacksmithMaterial :Alloy Steel
#Payment
1. Payment methods accepted: Payoneer, Paypal, Credit Card, Debit Card and many other mothods.
#Shipping
1. We ship items to Your address, it cannot be changed once the order shipped out.
2. Delivery time depends on destination and other factors(custom office & natural calamities),please feel free to contact us by email if you cannot get your order on time.
#Returns
1. Return item within 30 days from the delivery date for exchange or refund. Refund will be given as Money back or item exchange (buyer's choice).
2. Return shipping fee is the responsibility of buyer unless the return is a result of our mistake.And all NON-seller mistake returns for refund are subject to 20% re-stocking fee.
3. If return is needed, please contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
#response
1. We maintain high standards of excellence Four 5-star rating and strive for 100% customer satisfaction! Positive response is very important to us.
2. If you are not satisfied with our product or our Service, please feel free to contact us immediately BEFORE you leave neutral or negative response, we will try our best to resolve any problem and make you satisfied.
#Contact Us
Please contact us via using"Contact member". We will respond within 1 business day or less. Thank you for your understanding.
Our office hours is as below :
- 9:00 a.m. to 6:00 p.m. (GMT +8) of Monday to Friday
- 9:00 a.m. to 1:00 p.m. (GMT +8) of Saturday
And our office is closed on Sunday and public holidays (Hong Kong)
We apologize for the late reply during the holidays.
All rights reserved.
Shop CategoryStore Home Boat Parts Accessories Car & Truck Parts Ford Parts & Tools Cummins Parts & Tools Dana Parts & Tools Cat Caterpillar Parts & Tools Volvo / Mack Parts & Tools Dodge / Chrysler / Jeep Tools Duramax Parts & Tools Detroit Diesel Parts & Tools GM Parts & Tools Oil Filter Wrench Chevy Chevrolet Tools Brake Pads John Deere Tools OtherHot Item Men\'s Classic Striped Ties JACQUARD WOVEN Tie 100% Silk Tie Necktie #L057 USD 6.49 Pressure Washer Chemical Soap Injector Kit for Briggs Replace 190593GS 190635GS USD 10.99 Hydraulic Cylinder Seal Kit 2” Rod & 4” Bore Fit for G109423 / Case 1543273C1 USD 18.99 Mens Classic Striped Tie JACQUARD WOVEN 100% Silk Ties Necktie Dark Blue #L288 USD 6.49 Classic Striped Ties WOVEN JACQUARD Silk Men\'s Suits Tie Necktie Red #L026 USD 6.49 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout UsNew List Item 10000PSI Hydraulic Pressure Gauge Kit for Excavator Machinery 1 700BAR 1/4 NPT USD 257.00 R0557100 Pressure Gauge Adapter with O-Ring Seal For Zodiac Jandy CS100 CS150 USD 18.41 Deck Brake Pad 761-05007 For Cub Cadet XT1-LT42,XT1-LT42 C, XT1-LT46,Troy-Bilt USD 16.90 98209800 High Flow Manual Air Relief Valve For Clean & Clear Pool Spa Filters USD 22.90 52822 Model T-232 H-D 3\"\"C\" Cutter Coupler Drain Cleaning Tool For RIDGID K-400 USD 25.99
