When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
HIGH EFFICIENCY!
15.2 SEER
CARRIER 5 TON
HEAT PUMP
COMMERCIAL PACKAGED UNIT
Model #50HCQA06A2A5-0A3D0
208/230-VOLT 3-Phase R410A
ALL ELECTRIC
Medium Static Belt Drive
Hinged Panels
Nominal Cooling
Ton Size
Cooling
Stages
AHRI Efficiency
(SEER) EER
Dimensions (in.)
L x Wx H
Approx. Unit
Weight (lb)
5
1
(15.2)
74 x 47 x 41
600
Performance Features
- ASHRAE 90.1 and Energy Star compliant
- Up to 15.6 SEER, 13.0 IEER, and 12.2 EER
- Standard cooling operating range up to 125 °F (52°C) and down to 35°F (-2°C). Low ambient controllers can bring cooling operation down to -20°F (-29°C)
- Innovative non-corrosive composite condensate pan in accordance with ASHRAE 62 Standard, sloping design; side or center drain
- Pre-painted exterior panels and primer-coated interior panels tested to 500 hours salt spray protection
- TXV refrigerant metering device on each circuit with removable power element
- Fully insulated cabinet
Maintenance Features
- Control terminal board facilitating simple safety circuit troubleshooting and simplified control box arrangement
- Access panels with easy grip handles and tool-less filter access door
- Innovative, easy starting, no-strip screw feature on unit access panels
- Optional hinged access panels also available
- Belt drive evaporator-fan motor and pulley combinations available on all three phase models to meet any application
- Electric Drive x13 (5 speed/torque) motor on 04 to 06 models
- Two-inch disposable return air filters
Installation Features
- Same footprint as installed Carrier 3-5 and 7.5-10 ton rooftops back to 1989, reducing installation costs and time
- Field convertible from vertical to horizontal airflow for slab mounting (sizes 04 to 14)
- Provisions for thru-the-bottom power entry capability as standard
- Single point gas and electric connections
- Full perimeter base rail with built-in rigging adapters and fork truck slots
- Dedicated vertical and horizontal airflow models available (factory option on size 17 to 28 units)
Reliability Features
- Scroll compressors with internal line-break overload protection
- 24-volt control circuit protected with resettable circuit breaker
- Permanently lubricated evaporator-fan motor
- Totally enclosed condenser motors with permanently lubricated bearings
- Low pressure and high-pressure switch protection
- Solid-state electronic direct spark ignition system and flame roll-out safety protector
All of our inventory online is in stock at our warehouse in California. Unlike some "internet" stores that don't stock the inventory they are selling. The items that we sell are the same items we install everyday for our local customers. We come from a repair and install background so we can help you with all of your HVAC projects.
Never installed, wrapped and stored outside under a covered space. Because of the huge discounts the units are all being sold new, as is. This is a liquidated close out item. We are located in Los Angeles county and you are welcome to come by our warehouse to pick up by appointment. Unit is new and has never been installed. May have some slight cosmetic dings or scratches. Units will be crated when shipped to protect the condenser.Call us Toll Free at 1(888) 407-4042 for details Qualified technicians are here to help with your Purchase! Must call us to receive the FREE Digital THERMOSTAT with your order!
(Not included if purchased on ) ITEM WILL NOT SHIP UNLESS YOU HAVE A PHONE NUMBER FOR THE TRUCKING COMPANY !!!! It will be marked as shipped until phone number is received-It will ship the following day after Phone number is received! It will be shipped to address and phone given on If you have a different address or Phone number-- you must call!!!-Do not email or message you Must call ! If not you will be responsible for redirect fees from Trucker and or storage and return shipping along with original shipping fees if the proper address is not on original shipment
Shipping Insurance and Instructions
We Only use High Quality Freight Companies, Saia, YRC Freight, Ups, Fedex, Southeastern, Old Dominion and more ... Damage is Very Rare. Although Rare, Minor dents,dings and Scratches can Happen but will Not affect the Operation of the Equipment. If a Minor scratch, Ding or dent is visable upon receiving equipment, Accept the Delivery but Note the Damage on the Bill of Lading before you sign it. The trucking Company will Make Good on the Damages. If its Major Damage, refuse the Delivery and we will be contacted by trucker. Call us as soon as you have refused shipment. This Can Not be Done for Deliveries that Have Been Signed for & Accepted.
Do NOT Sign for Items That Have NOT Been Inspected. Make the Driver wait Once the bill of lading is Signed, You Will Own it and Remove Most or All of the Carrier' s Liability Even if the Signature is from Someone Else that Received it on Your Behalf-You will be responsible to call trucking company for any unseen or concealed damages if you do inspect package and its contents-If you do not understand this -Do not place order No exceptions!
IF YOU HAVE LESS THAN 5 responseS PLEASE CONTACT ME BEFORE offerDING.
Installation availablefor all of The Los Angeles area.
Questions? Need a different size? Email or Call [phone removed by ]
100% Positive response Buy with confidence!
