When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
CHEVALIER GRINDERNEW 2000
Specifications:
Chuck Size W x L 10 x 20
Longitudinal Table Travel (max) 20\"
Crossfeed Table Travel (max) 10\"
Type of Chuck ELec/Mag with Control
Height without Chuck 21\"
Power Vertical Evaluation YES
Wheel Speed 3450 rpm
Auto Downfeed: YES
Grinding Wheel (CXWXB) 12\" x 1-1/4 x 3\"
Power Cross Feed: YES
Spindle Motor 3 HP
Auto Crossfeed: YES
Longitudinal Travel, Hydraulic 22-7/8\"
Wheel Dia/Width 12 x 1-1/4\"
Table Speed, Infinitely Variable 16 x 82 fpm
Wheel Bore 3\"
Automatic Traverse increment 0.02\" to 1\"
Approximate Dimensions (LXWXH) 93\" x 85\" x 73
Approximate Weight 4,188 lbs.
EQUIPPED WITH:
Micro feed, vertical .00005 and .0001\"
10 x 20 Electro Magnetic Chuck and Control
Vertical Handwheel/div. .0005\"
Pendant mounted and Microprocessor Controlled Automatic Downfeed
Vertical Handlwheel Revolution 05\" of Grinding Wheelhead from 0.00005\" to .0.002\" in Surface or plunge modes of operation
Electric 230/480/60
Fully Automatic Grinding Cycle including Rapid Advance of Grinding Wheelhead
0 to 7 Sparkout Passes and Retractin of Wheelhead to a pre-set Distance at the completion of the cycle
Table and Saddle Guide Ways made of Special Steel Rails with High Accuracy Steel Rollers
Precision Needle Roller Bearings used on the Elevating Guide Ways.
Fine (micro) Feed Graduated to .00005\" for vertical and cross feeds
Over the Wheel Parallel Dresser
External Hydraulic System with 2 HP 3/60/220-440 Volt Pump Motor and Tank
External Coolant System with Pump and Motor and Integrated Mist Collection System
3 HP 3/60/220-440 Volt Direct Drive Spindle Motor Machine is Wired for 220 Volt Operation
FOB: Tempe, AZ
