When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Complete 6000N 12V Single Axis PV Solar Sunlight Track Panel Tracker System Kits
Complete 6000N 12V Single Axis PV Solar Sunlight Track Panel Tracker System Kits
Here for sale isComplete Single Axis Solar Tracker Kits, itemsInclude a 6000N 150mm/6\" Stroke Linear Actuator &Mounting Bracketsand the Electronic LCD Controller and the Wind Speed Sensor (Anemometer) you need for a single axis solar tracker system.
Build your own frame and you will get a professional grade single axis solar tracker!
Package Included:
★1x 6000N 150mm 6\" Stroke DC 12V Linear Actuator.
★1x LCD Single Axis Solar Tracker Controller +Light Sensor+IR Remote.
★2x Mounting BracketsW/ 2PCSbolt and 2PCS cotter pinfor the linear actuator.
★1x Wind Speed Sensor +3Meters Cable.
Wiring Diagram:
Note 1: The battery in the photo is only for reference and is not included in the package.
Note 2: Make sure the input voltage for the whole system is DC 12V and the input current is no less than 5A.
Note 3: The solar tracker controller box is not waterproof, remember to protect it when assembling.
About the Linear Actuator:
For this 6000N linear actuators,we provide 150/200/300/400/450mm Stroke Length, here for sale is the 150mm 6\" Stroke,if you need other size,PlsClick Here
About the Solar Tracker Controller:
This is WST03-3 Single Axis Solar Tracker Controller, items include the Controller Box, Light Sensor With 3 Meters Wire and IR (infrared) Remote control, we will provide English Manual together with the items.
The controller analyzes the signal from the light sensor, then control the motor of the corresponding direction toexecutepositive rotation, reverse rotation and stop, and make the platformto be aligned with the sun.
Three Modeswill appear during the controller\'s auto working, the controller will automatically switch the three modes according to different conditions.
The three Modes are:Sunny Day Auto Tracking Mode, Night (Cloudy Day) Mode, Strong Wind Protection Mode.
Users can set the parameters and working modes by the LCD screenfor actual needs.
There is an IR Remote for manual control, it can be used for testing when you assemble/use the controller the first time.
Extra Limit Switch and Wind Speed Sensor (Anemometer) can be matched with the controller for actual needs.
We provide moreinstructionand detailed settings in the English User\'s Manual.
Specification:
Product Name
WST03-3 Solar Tracker Controller
Brand
SZMWKJ
Condition
100% New
Controller Box Dimension
InputVoltage
DC 12V/24V (DC 9V~35V)
Max Load Current
15A
Operating Temperature
-20℃to +60℃
Tracking Accuracy
≤1°
Controller Box:
Controller Features:
1.High tracking accuracy, average tracking accuracy≤1°(Actual accuracy is related to the platform’s moving speed);
2.The light sensor has a wide range of detection angle and high accuracy. It’s inside the waterproof case, waterproof, dustproof and anti-aging;
3.With LCD display which can show multiple working modesand parameters;
4.Many of the parameters can be set (Tracking accuracy, threshold value of light-sensor, threshold value of wind speed sensor, interval time of cyclical tracking, etc...);
5.With strong wind protection mode (Wind speed sensor is required);
6.Can setthe platform to stay at any position atnight (or cloudy day);
7.Canadd extra limitswitches;
8.Can be operated by IR remote control or the buttons on the controller box;
9.Reverse battery protection, overcurrent protection; standby current ≤15mA.
Controller Attention Matters:
1.Input Power Supply: DC 12V/24V (DC 9V~35V); Output Voltage=Input Voltage; Output Current:≤15A.
2.The controller needs stable powersupply, it can be battery or switching power supply, solar panels cannot be directly connectedas power supply, unstable voltage may damage the controller. The maximum current of the power supply must begreaterthan 1.5 times of the total load current of the platform, because the starting current for DC motor is relatively large.
3.This controller can directly drive DC brush motor, the rated voltage of the motor should be the same as the power voltage of the controller. If use other types motor, this controller cannot directly drive, in this case additional control circuit need to be added.
4. If the total load current of the platform is greaterthan 15A, a relay module is neededto increasethe load capacity of the controller.
5.The controller is preferably fixedly installed and will not move together with the platform. The controller is not waterproof and should preventwater fromentering.
Light Sensor and IR Remote:
Light Sensor Attention Matters:
1. The light sensor should be fixed on the platform and can move together with the platform, it cannot be blocked by anything.
2. The base of the light sensor mustbe parallel to the solar panel or onthe same plane.
3. The “East” direction marked on the light sensormustbeconsistentwiththe local geographic direction.
4. The length of the connecting wire forthe light sensor mustbe greaterthan the platform\'s movable range. (Factory default length is 3 meters, it can be increased to 30 meters at most)
IR Remote Attention Matters:
1. The remote control requires 2 pieces AAA batteries (factory defaults no batteries inside).
2. The remote control belongs to infrared remote control,it mustbe aligned with the controller when using, the remote control range is ≤ 6 meters.
3. The buttons on the remote control have the same function as the buttons on the controller box.
About the Wind Speed Sensor (Anemometer):
This wind speed sensor is composed of a shell, three wind cups and a circuit module. The whole sensor has a high strength, weather resistance, corrosion resistance and water resistance, will be to ensure the long-term use of the instrument, and the accuracy of the wind speed collection. It is very suitable for outside measurement.
Specifications:
Brand: SZMWKJ
Model: MW-FS03
Material: Polycarbonate Material
Color: Black
Accuracy: ± 1m/s
Start-up Wind Speed: 0.2-0.4 m/s
Output Type: Voltage Output
Measurement Range: 0-32.4m/s
Output Signal: 0-5V
Wind Speed: (Output voltage/5)*32.4m/s
Cable Length: 3 Meters
Product Highlights of the Solar Tracker System:
* Standard 1 year warranty.* Free-maintenance.* Easy-installation.* Single axis tracker provides up to 35% more power production.* Engineered to hold up to 1000 Watts of solar panels.* Waterproof with IP65.* Small self–consumption.
Caution:
* The Input Voltage for the whole system should beDC 12V.* Never approach a solar tracker while theSolar Tracker electronicsare “on”.
* The solar tracker can move unexpectedly and thepowerful linear actuator/motor can cause serious injury or death.
* Always disconnect the Solar Tracker electronics from its power supply before approaching the solar tracker.Application:
Solar tracking system: Solar photovoltaic System, solar thermalsystem,etc.
About Shipping:
*This item will be shipped outwithin 1-3 Business Daysafter confirmed payment received.
- * Goods are in stock in USA warehouses, buyer can get the parcel around 3-5 business days.
- *We provide tracking number freely for all buyers.
- *Please confirm your shipping address is correct. Buyers are responsible for undeliverable order due address mismatch.We reserve the right to charge shipping fee to reship undeliverable items.
- * Any potential customs tax fee applied to the parcel should be covered by the buyer.
