Heat.net

Heat.net Store Home


DC 12V F Fahrenheit Temperature Controller Thermostat Control 1 Relay NTC Sensor For Sale


DC 12V F Fahrenheit Temperature Controller Thermostat Control 1 Relay NTC Sensor
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

DC 12V F Fahrenheit Temperature Controller Thermostat Control 1 Relay NTC Sensor:
$17.45







ads

DC 12V 1 Relay Digital Fahrenheit Temperature Controller

This is a DC 12V Digital Temperature Controller. There's 1 relay on this controller. Refrigeration or heating mode can be set through the menu. Can be used for domestic freezer, water tanks, refrigerator, industrial chiller, bolier, steamer, industrial equipments and other temperature-controlled systems.
    For example, If you choose Heat mode(Set HC to H). Set Temperature Value to 80°F. Set d value to 20°F.The relay will be connected when the temperature drop to 60°F(set temperature value-d value). And the relay will be disconnected when the temperature reaches 80°F.
    If you choose Cool mode(Set HC to C). Set Temperature Value to 80°F. Set d value to 20°F.
    The relay will be connected when the temperature reaches 100°F(set temperature value+d value). And the relay will be disconnected when the temperature drops to 80°F.You can refer to this video(click this range: -4°F~+212°F
  • Slew range of temperature control: 1°F-25°F(max temp span between cut in and cut off)
  • Control resolution: 1°F(minimum temp span between cut in and cut off)
    If you need controller which can control minimum0.1°F span, please check here, choose the pre-wired one in our store
  • Power supply: 12V DC
  • Power consumption: less than 3W
  • Relay contact capacity: retention: Yes
  • Compressor delay protection: YES
  • For DIY incubation, aquarium, sous vide, etc.
Size:
  • Product size:75(L) x 34.5(W) x 85(D)(mm)
  • Sensor Cable length: 3m (include the probe)
  • Sensor probe: length: 2cm(25/32''), Diameter: 4mm(5/32'')

Package Include:

  • 1 x DC 12V temperature controller
  • 1 x NTC sensor (3m cable)
  • 1 x English Manual



  • Buy Now

    Other Related Items:



    Related Items:

    DC12V Complete Single Axis Solar Tracker - 6000N Linear Actuator +LCD Controller picture

    DC12V Complete Single Axis Solar Tracker - 6000N Linear Actuator +LCD Controller

    $144.99



    Intermediate Relay For CHINT JZX-22F/4Z DC AC 3A 14pin 12V 24V 36V 110V 220V picture

    Intermediate Relay For CHINT JZX-22F/4Z DC AC 3A 14pin 12V 24V 36V 110V 220V

    $10.75



    Intermediate Relay JQX-13F/2Z for CHINT DC AC 10A 8pin 12V 24V 36V 110V 220V picture

    Intermediate Relay JQX-13F/2Z for CHINT DC AC 10A 8pin 12V 24V 36V 110V 220V

    $7.66