When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
DC12V 24V Electronic Dual Axis PV Solar Tracking LCD Solar Tracker ControllerDC12V 24V Electronic Dual Axis PV Solar Tracking LCD Solar Tracker ControllerPackage Included
Optional A:Only 1PCS IR Remote Control(No Battery Included).
Optional B:Only 1PCS Light Sensor.
Optional C:Only 1PCS Controller Box.
Optional D:1PCS Controller Box + 1PCS Light Sensor.
Optional E:Whole Unit: 1PCS Controller Box + 1PCS Light Sensor + 1PCS IR Remote(No Battery Included).
Notes: Pls check each mode carefully and choose the right mode as you need!
Here for sale is WST03-2 Dual Axis Solar Tracker Controller, The whole unit contains the Controller Box, Light Sensor With 3 Meters Wire and IR (infrared) Remote control.
The controller analyzes the signal from the light sensor, then control the motor of the corresponding direction toexecutepositive rotation, reverse rotation and stop, and make the platformto be aligned with the sun.
Three Modeswill appear during the controller's auto working, the controller will automatically switch the three modes according to different conditions.
The three Modes are:Sunny Day Auto Tracking Mode, Night (Cloudy Day) Mode, Strong Wind Protection Mode.
Users can set the parameters and working modes by the LCD screenfor actual needs.
There is an IR Remote for manual control, it can be used for testing when you assemble/use the controller the first time.
Extra Limit Switch and Wind Speed Sensor (Anemometer) can be matched with the controller for actual needs.
We provide moreinstructionand detailed settings in the English User's Manual.
Specification:
Product Name
WST03-2 Solar Tracker Controller
Brand
SZMWKJ
Condition
100% New
Controller Box Dimension
InputVoltage
DC 12V/24V (DC 9V~35V)
Max Load Current
15A
Operating Temperature
-20℃to +60℃
Tracking Accuracy
≤1°
Controller Box:
Controller Features:
1.High tracking accuracy, average tracking accuracy≤1°(Actual accuracy is related to the platform’s moving speed);
2.The light sensor has a wide range of detection angle and high accuracy. It’s inside the waterproof case, waterproof, dustproof and anti-aging;
3.With LCD display which can show multiple working modesand parameters;
4.Many of the parameters can be set (Tracking accuracy, threshold value of light-sensor, threshold value of wind speed sensor, interval time of cyclical tracking, etc...);
5.With strong wind protection mode (Wind speed sensor is required);
6.Can setthe platform to stay at any position atnight (or cloudy day);
7.Canadd extra limitswitches;
8.Can be operated by IR remote control or the buttons on the controller box;
9.Reverse battery protection, overcurrent protection; standby current ≤15mA.
Controller Attention Matters:
1.Input Power Supply: DC 12V/24V (DC 9V~35V)Output Voltage=Input Voltage
Output Current: E/W≤7.5A, S/N≤7.5A, total current ≤15A
2.The controller needs stable powersupply, it can be battery or switching power supply, solar panels cannot be directly connectedas power supply, unstable voltage may damage the controller. The maximum current of the power supply must be greater than 1.5 times of the total load current of the platform, because the starting current for DC motor is relatively large.
3.This controller can directly drive DC brush motor, the rated voltage of the motor should be the same as the power voltage of the controller. If use other types motor, this controller cannot directly drive, in this case additional control circuit is needed.
4.If the motor current in asingle directionis greaterthan 7.5A, a relay module is neededto increasethe load capacity of the controller.
5.The controller is preferably fixedly installed and will not move together with the platform. The controller box is not waterproof and should preventwater fromentering.
Light Sensor and IR Remote:
Light Sensor Attention Matters:
1. The light sensor should be fixed on the platform and can move together with the platform, it cannot be blocked by anything.
2. The base of the light sensor mustbe parallel to the solar panel or onthe same plane.
3. The “East” direction marked on the light sensormustbeconsistentwiththe local geographic direction.
4. The length of the connecting wire forthe light sensor mustbe greaterthan the platform's movable range. (Factory default length is 3 meters, it can be increased to 30 meters at most)
IR Remote Attention Matters:
1. The remote control requires 2 pieces AAA batteries (factory defaults no batteries inside).
2. The remote control belongs to infrared remote control,it mustbe aligned with the controller when using, the remote control range is ≤ 6 meters.
3. The buttons on the remote control have the same function as the buttons on the controller box.
Application:
Solar tracking system: Solar photovoltaic System, solar thermal system, light guide and lighting, etc.
Want more information? Additional information and detailed instructions can be found in the User's Manual
About Shipping:- *This item will be shipped outwithin 1-3 Business Daysafter confirmed payment received.
- *We provide tracking number freely for all buyers.
- *We ship viaStandard Deliveryfrom China which usually takes8-12 working days to United States.
- *For other countries, we normally ship byChina Post/Singapore Postwhich takes about25-40 business days.
- Please make sure you accept the shipping time before you make purchase.
- *Please confirm your shipping address is correct. Buyers are responsible for undeliverable order due address mismatch.We reserve the right to charge shipping fee to reship undeliverable items.
- * Any potential customs tax fee applied to the parcel should be covered by the buyer.
On Oct 18, 2023 at 01:13:56 PDT, seller added the following information:
