When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
The #1 Vacuum Chamber Source!Heated 3 Gallon and 3 CFM Single Stage Vacuum Chamber Kit to Degass Extracts and Concentrates, Precise Digital Control Accurate to +/- 0.2F - Acrylic LidProduct DetailsAll chambers are 100% tested prior to shipping
Proudly designed and assembled in Chicago, IL
We DO NOT drop ship our pumps like our competitors
If you are infusing wood blanks see important notes below
International customers are liable for all brokerage fees, duties and taxes (see below)
Purchase before 2PM CST and it will Ship the same day!
This is a complete vacuum chamber kit and will come assembled for instant use. We are the number one provider of vacuum chambers because of our great customer service, quick turnaround time, and unbeatable 30 day warranty. We monitor our listings daily and have a reputation of responding to all inquiries very fast and accurately. For inquiries, please give us a call.
Chamber Dimensions: 10\" Diameter X 9.25\" Deep
Do not exceed 140F with this chamber
This System Includes:
(1) High strength aluminum container (Wall thickness 0.160\" - 4mm) Hydro Tested and Sealed for Leaks
(1) 3/4\" thick clear acrylic lid (Extra thick, does not deflect under vacuum))
(1) Heat cured silicone gasket chemically resistant to solvents (Temp rated to 400F)
(1) Nickel plated brass polypropylene ball valves. (Temp rated to 200F)
(1) Glycerin filled Industrial Vacuum Gauge (Shock resistant for shipping and accurate to within 0.5inHg)
(1) Steel wire reinforced vacuum hose (collapse proof)
(1) Nickel plated brass vacuum pump fitting. (Universally fits all vacuum pump ports, custom designed with an inside pitch of 37.5 Degrees to fit pumps with 32-45 Degree Flare ports)
(1) 50 Micron air filter (attaches to valve assembly, reduces air flow back into chamber for purging and prevents dust and debris from blowing onto the product inside. Does not come installed)
(1) 8\"x 8\" FDA grade non-stick silicone pad
(1) Max vacuum rated to 29.9inHg at sea level
(1) Digital Heat Pad - Read Specs below and the Information about the Heatpad
(1) 3 CFM single stage 50 Micron vacuum pump (120/240VAC 50/60HZ International voltage compatible)
(Pump color may be different from picture; specifications are exactly the same)
(We only ship 120/240VAC 50/60HZ pumps to international customers excluding Canada. If you are taking the pump overseas you must contact us prior to purchasing)
3 CFM vacuum pump ships with Order. We DO NOT drop ship! Your kit will arrive with all the parts you need Ready to use on arrival. We may ship the kit in two separate boxes, but they will ship from our warehouse at the same time on the same day. Your tracking number will show 2 packages in the shipment on UPS.com if we ship two boxes.
•Approx. Time to 29.0Hg is 1.5 (minutes) with a 3 CFM Single Stage Pump
Read Specs below and the Information about the Heatpad
Heat Pad Specs:
UL Listed Fahrenheit Digital Controller.
Min Temp: Ambient + 5
Max Temp: 160F
Voltage: 110VAC Only
Digital Control: Increments of 1 Degree.
Accuracy: +/- 0.2 Degrees
Units: Degrees Fahrenheit
Instructions: Fully included
Relay Lifespan: Approx. 10 million cycles
Re programmable by user: Yes
Information About the Heatpad......Please Read!
This Fahrenheit Heat Pad will adhere to the bottom of the chamber with a peel and stick
backing, It will come with simple standoff bumpers that will provide thermal separation from
the work surface. The bumpers do not stick well to silicone but get the job done.This heater is super accurate, and will hold a temp within a degree (depending on the
environment and air movement)The heater includes full instructions to operate it and make PID controller changes. You can
leave this heater on for months without any off time.The pad comes with thermal tape seen in the images above. This will be used with a
thermal laser gun to shoot the temps. If you have a thermocouple that would be the best
method to check and verify temps. The controller has a temperature offset that will need to
be found to set the controller accurately. Anything you attach a heat pad to will act like a
heat sink. So the set temperature will be different from the actual inside temperature.
However, our instructions tell you and provide the thermal labels to accurately find the offset
and program the difference in. For example: If you set the 3 gallon chamber in the image above to 110F the actual temp on
the bottom surface inside the chamber will read about 101F on the thermal label. (don\'t
move the gun around, thermal labels reflect lasers too) Since the inside is reading 101F and
the controller is set to 110F your offset is 9F, so
Add 9 Degrees to the 110F setting (119F) and you will achieve your 110F on the inside
surface of the READ ALL INSTRUCTIONS provided with the chamber before use, Its worth your time to learn a little about how to operate this Excellent and Easy to use Product. The Gauge has a atmospheric calibration plug that will need to be cut upon arrival and prior to first use of the chamber. The paper on the lid will need to be removed as well.
Vacuum Readings are Dependent on Elevation!! Please note that for every 1000ft of elevation your max vacuum you can achieve is reduced by approximately 1Hg.(Example: 0ft elevation = 29.92inHg, Denver, CO 5000ft Elevation = 24.82)
Important Notes
*If you intend to use our systems for pen blank infusion with an acrylic based resin such as Cactus Juice we recommend our \"GlassVac\" chamber design for 100% resistance to the harsh chemicals. All chambers with an acrylic lid may be damaged by these resins and may crack because of their similar chemical makeup. The polycarbonate lids on ShatterVac will provide more resistance but may too be damaged by infusion resins such as Cactus Juice.
*For Canadian customers with the option to use UPS note that we are part of the UPS e-Tailer Brokerage Program for individuals to lower the consumer brokerage fees (Excludes Business Addresses). For details on shipping and brokerage fees please view our company\'s shipping page.
*Shippers such as USPS and FedEx have the brokerage fees built into their price. UPS will charge Canadian customers a brokerage fee upon arrival.
*USPS, FedEx and UPS DO NOT include duties and taxes for international customers. Customers receiving a UPS package will need to pay brokerage fees, duties and taxes to accept the package.
*Chambers with pot handles are bench tested in a water bath to ensure that there are no leaks. If a leak is found we will seal the rivet with a high temperature sealant compound that does not out-gas under 400f which exceeds our chambers operational temperature.
Frequently Asked Questions
- Will this vacuum chamber hold a vacuum for an extended period of time? Yes, Our chamber is rated to loose no more than 2.5inHg over 24hrs.
- Are these vacuum chambers safe? Yes, all of our chambers have been tested to their limits to ensure that they are strong enough for their advertised applications. Acrylic is an inherently strong material which is why in proper applications it is bullet resistant much like poly-carbonate. Do not believe claims that poly-carbonate is \"Bullet Proof\", it is not. Only in proper applications with multiple material laminates can poly-carbonate be considered bullet proof.
- Can these chambers be heated? Yes, many of our customers routinely heat these chambers. The chamber can safely be heated up to 160F, in excess of that the user assumes all risk.
- What kind of pump do you recommend for your chamber? We have paired our chambers with recommended pumps in kits, but any vacuum pump will work. All of our chambers have been tested with a 9CFM dual stage pump.
- What if the chamber is shipped to the wrong address? The buyer is solely responsible to ensure their shipping information is correct, we will not be liable for lost packages. We ship all of our products same day or next day. If the package is already in transit and a change needs to be made before delivery we will require a $15 rerouting fee or else face a total loss on the purchase.
- Who pays import fees and tariffs? These are entirely the buyers responsibility, please check with your country\'s customs office to determine what the additional costs will be prior to buying our product. Import duties, taxes and charges are not included in the item price or shipping cost.
- Is there any assembly required? Yes, buyers will need to remove the protective paper from the lid on arrival, cut the calibration tip off the gauge, and install your gasket. The gasket goes on like a large rubber band. Setup time is about 1 minute.
The #1 Vacuum Chamber Source!
(331) 281.0154
© 2014 Best Value Vacs. All Rights Reserved.
