EGW Winchester Model 70 Short Action Scope Mount 0MOA - 42600 For Sale

EGW Winchester Model 70 Short Action Scope Mount 0MOA - 42600

Evolution Gun Works EGW

Our Winchester 70 mounts will work for any short action, long action, WSM or WSSM mount.
*The Winchester Coyote edition chambered in .243 will require our WSM mount.*The middle spread is the distance between the two middle holes, center to center, on your receiver. The middle spreads on our Winchester 70 mounts are as follows:Winchester 70 Short Action: 3.259\"
Winchester 70 Long Action: 3.805\"
Winchester 70 WSM: 3.514\"
Winchester 70 WSSM: 3.225\"This mount comes standard with a bevel on both sides making it amofferextrous.We recommend measuring the hole spacing in your receiver to confirm it matches with the dimensions we have published.Picatinny cross slots run the full length of the rail, which gives the shooter flexibility when mounting scope rings and other accessories. The channel in the center reduces the overall mass of the mount. Also, in many cases, it will not obstruct usage of factory iron sights. Our one-piece scope mounts are the obvious choice for hunters and tactical shooters alike.We machine these in our shop using one of our machining centers. After machining, the mounts are tumbled, sand blasted, and Type II anodized for long lasting durability.Installation: We recommend 20 inch lbs of torque and a drip of blue loctite (loctite is available through our website and is sold separately).We recommend:
0 MOA - if shooting 0-500 yards
20 MOA - if shooting 500-1000 yardsWhen zeroing your rifle with a 20 MOA mount, we recommend zeroing at 200 yards.The entire mount and accessories (from the mounting screws and wrench down to the packaging) are made in the USA.Rail Type: One Piece Picatinny
Machined from: Domestic 6061 T6 Extruded Aluminum
Finish: Matte Black Anodizing
Center Spread: 3.259\"
Overall Length: 6.276\"
Height: .4\" (Top of Receiver to Top of Picatinny)
Weight: 2 oz.
Quick Disconnect Ring Compatible: No
Amofferextrous: Yes
Torque Specs: 20 in/lbs
Mounting Hardware: #6-48 X 1/4 Screws and T-10 Bit Included
Mounting Hardware is IncludedThis mount fits:
Winchester 70 Short Action
Marlin X7 Short Action
Marlin XS7 Short Action*The Winchester Coyote edition chambered in .243 will require our WSM mount.*

Please note not all parts are \"drop in\". As with all gun parts some installations may require disassembly and reassembly. Some parts may require installation by a qualified gunsmith.

!!ALWAYS MAKE SURE YOUR FIREARM IS UNLOADED BEFORE PERFORMING ANY MAINTAINANCE OR UPGRADES!!No Liability is expressed or implied for damage or injury which may result from improper installation or use of this product.This product should be installed and checked by a qualified gunsmith. Not doing so or using the wrong tools may damage the part and/or your firearm.

All Products are made in the USA by Americans. Should you have any questions or issues with your new product please contact me. It is my goal to make my customers 100% satisfied with their purchase (within reason). ***Please Note: All returns MUST Be In Original Packaging and in a resalable, brand new condition. Item(s) must be in new/unused/unworn condition for an exchange/refund. Application errors will incur a minimum of 15% restocking fee. If you are not sure of the product and its use please contact The Sporting Jack for applicability and questions. Used and/or damaged items must be exchanged through the specific manufacturer for warranty issues.

The Sporting Jack Outfitters is a Certified Service-Disabled Veteran-Owned Small Business.

Thank you for your business-Dave Kravetz