When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Rust Encapsulator Platinum is a high-performance, moisture-cured coating that encapsulates and stops rust from spreading.
- Three times Stronger than Original Rust Encapsulator
- Metallic Silver Finish
- Apply Directly Over Surface Rust
- Heat Resistance to 350 Degrees F
- Apply with Brush or Spray
Rust Encapsulator Platinum can be used as a top coat or can be top-coated with almost any paint. It can be applied over bare metal or surface rusted areas. Brush or spray applied with conventional spray equipment. Rust Encapsulator Platinum is ideal for any type of rusted metal surface and can withstand temperatures up to 350 degrees F.
- A single component aluminum pigmented coating
- 67% solids by weight
- Proprietary additive increases product adhesion to rusted steel substrates- unmatched by competitive coatings
- 1 coat assures maximum protection
- Brush, roller or spray applied
- Paint Gun: HVLP gravity or siphon with a 1.4 minimum needle/nozzle
- Re-coat able after 4 hrs.- if top coating after 48 hrs., scuff surface with 320 grit paper
- 2 hrs., tack-free
- Easy to apply
- Topcoat able with virtually any high-quality coating
- Maximum service temp of 350° Fahrenheit Recommended Substrates and Prep Apply product as a primer/Encapsulator over clean or corroded (rusted) steel or cast iron
Prep surface by mechanically cleaning loose flaking rust with a stiff brush or wire brush/wheel
Remove any grease, oils or other surface contaminants with a solvent such as PRE or Acetone
Apply by brush, roller or spray\"
Rust Encapsulator Platinum - Stop Rust on Vehicles, Equipment Or Anything That Rusts! - Eastwood - YouTube
Video will open in a new window
Using the App? Paste link into a browser window:
[isdntekvideo]
