When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Black Gray Ebony composite wood veneer 24\" x 48\" with no backing 2\' x 4\' x 1/42\". Composite veneer is real wood that has been dyed and cut to produce a consistent, clean defect free appearance. Otherwise, just like normal wood veneer. Veneer darkens some and becomes much prettier when finished as you will notice the difference in dry and wet pictures. Product is unfinished. Some photos may show other sizes. Some photos may be of other sizes. Grain runs longer direction. Color is a mix of black and gray. Each sheet carefully inspected and packaged by our company.
Trust the experience, knowledge, and reputation that has served the wood industry and novices since 1995.
Visit My store: JSO Wood Products
Other sizes and backed veneer may be available.
About pictures: Most pictures have been temporarily wet on the lower portion of the veneer to show what the grain may look like when finish is added. Color adjustments have been made to show the color as best as is possible. It is impossible to get photos exactly correct in color, but we have made an effort to do so.
Backed products come with complete application instructions that are simple and clear. For raw veneer or un-backed products, we suggest using the Internet to see what advice is available as opinions vary on the best way to handle that product. Below is general information for most of our products. Make sure you check the listing to see which applies to the above product in particular.
Thickness: (will not always be exactly correct, but relatively close)
Paper-backed veneers = 1/40”
Wood-backed veneers = 1/25”
Raw plain veneer with no backing = 1/32”-1/42”
How to cut: generally cut with a razor/box knife or similar tools and some type of straight edge.
How to apply: Paper-backed and wood-backed veneers are generally applied with contact cement. Raw plain veneer is applied with white or yellow wood glue and must have pressure applied while drying.
How to finish: most any conventional finishing products can be used with veneer that is applied correctly.
Disclaimer: Sometimes veneers have minor splits or tears in them. These are usually taped or repaired in some manner and shouldn’t impact overall quality or satisfaction. There may also be some minor wood filler used to fill cracks and other crevices that may exist. Wood products are rarely perfect and some consideration of that may be needed occasionally since this is a natural product and is rarely ever perfect.
Some sanding is usually required before finishing to prepare the surface for a finish and occasionally to remove veneer tape, splice glue, or some other imperfection.
![Ebony Black Gray composite wood veneer 24\](img-large/g/CwYAAOSwJtJcPOsn/s-l1600/Ebony-Black-Gray-composite-wood-veneer-24-x-48-raw.jpg "Ebony Black Gray composite wood veneer 24\")
