When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Eccoflo Diaphragm 12V 2.9 GPM 50 PSI Water Utility Pump and Strainer
- Works with any Eccotemp portable tankless water heaters
- Self-priming pump efficiently removes air from its passage
- Designed to run dry without damaging the motor
The Eccotemp EccoFlo is a portable compact water pump allowing pressurized water wherever you need it. Whether you're needing to pull water from a creek to your Eccotemp Portable Tankless Water Heater or you need to transfer liquids from one area to another, the EccoFlo is the perfect tool for the job. The EccoFlo is CE Certified and compatible with any of our portable tankless water heaters and can be used in any scenario where you need to pump or pressurize liquids.With a self-priming feature this allows the pump to safely run dry without any damage. The EccoFlo is designed to turn on and off as you turn your water tap nozzle on and off. Powered using only 12V, this water pump can be used virtually anywhere and comes with everything needed for a quick and easy installation. Recommended Uses: Water heaters, RV, Marine, Automotive, Agriculture Spraying Waterlines, Water Operated Equipment, Beverage Processing, Filtration and Solar Water Systems
- 3.0 GPM (Gallons per minute), 45 PSI, 12 Volt, 3.5 Amps
- Delivers reliable performance in high flow, moderate pressure application
- Self-Priming
- Soft, Noise Absorbing Mounts
- Can safely run dry
- Snap-in 1/2" Port Fittings
- Made of Corrosion Resistant Materials
Amperage (A) 3.5 A Cord Length (ft) 6 Discharge Flow @ 0 ft (gallons/hour) 3 Discharge Flow @ 0 ft (gallons/min) 0 Discharge Flow @ 10 ft (gallons/hour) 2.5 Discharge Flow @ 10 ft (gallons/min) 0 Features Corrosion Resistant,Portable,Run-Dry Capable,Self-Priming Head Pressure (ft) 10 Housing Material Thermoplastic Impeller Material Plastic Included Hardware,Pump Hookup Inlet Connection Push-to-connect/push-on Maximum Discharge Flow (gallons/hour) 174 Maximum Horsepower (hp) 1/7 Maximum Pressure (PSI) 45 PSI Maximum Working Temperature (F) 140 Minimum working temperature (F) 32 Outlet Connection Push-to-connect/push-on Pack Size 1 Power Type Electric Power Type Required DC Product Weight (lb) 4.2 lb Pump Switch Type Diaphragm Returnable 90-Day Vertical Lift (ft) 10 Voltage 12v Certifications and Listings CE Certified Manufacturer Warranty 2 Product Depth (in) 6 in Product Height (in) 8 in Product Width (in) 6 in
6.0 inches x 6.0 inches x 8.0 inches. Weight: 4.2 lb
