EISEN 2280G Precision Engine Lathe, 4.5\" Bore, 22\" x 80\", 15HP, Made in Taiwan For Sale

EISEN 2280G Precision Engine Lathe, 4.5\" Bore, 22\" x 80\", 15HP, Made in Taiwan EISEN 2280G Precision Engine Lathe, 4.5\" Bore, 22\" x 80\", 15HP, Made in Taiwan

EISEN 2280G Precision Engine Lathe, 4.5\" Bore, 22\" x 80\", 15HP, Made in Taiwan

Price Reduction Sale Going On Now

EISEN 2280G Precision Engine Lathe with 4” Spindle HoleGreat for turning of long workpieces up to 80\" between centersFeaturesSpindle

• Large spindle through hole allows larger diameter parts than the competition.
• Precision NSK and SKF bearings installed on spindle to ensure accuracy and rigidity for heavy cutting.
• Maximum cutting depth can be 8mm and roundness reaching 3 micron (200mm long).

Durability

• Heat treated and precision ground alloy gears.
• Wear-resistant phosphor bronze lead screw nuts.

Safety gears

• Equipped with plastic rear gears, so that shafts and gears inside headstock are well protected if crash should occur (optional).

Cone clutch

• Cone clutch overload device in apron to ensure safety when operating.

Extra large tailstock clamp

• The tailstock has extra large clamp for increased contact and stability.

Two-speed tailstock

• Choose between fast movement or fine control with the optional two-speed of cross slide and bed are automatically lubricated with a lubrication pump that lubricates as the carriage moves.
• Oil bath lubrication for cross feedscrew & nuts provide extra degree of protection and prolong service life.

Meehanite casting

• Heat treated Meehanite casting bed. Hardness of bed reaching HS70 (approx. HRC 53)
• One-piece base combines high rigidity and good vibration dampening gearbox for both inch and metric threading — conversion table is also included.
• High-capacity coolant system offers ample coolant over Bed22” (560 mm)Swing over Cross Slide13.39” (340 mm)Center Distance79\" (2000mm)Swing over Gap31.02” (788 mm)Bed Width15.75” (400 mm)Spindle NoseD1-11Spindle Bore4.5” (115 mm)Taper of Spindle BoreMT 7Spindle Speed10~1000 (12-step)Inch Thread Range2 ~ 56 TPILongitudinal Feeds Range0.0020 ~ 0.0323 ipr (0.05 ~ 0.82 mm/rev)Cross Feeds Range0.0008 ~ 0.011 ipr (0.02 ~ 0.28 mm/rev)Leadscrew Diameter1.5” (38 mm)Leadscrew Pitch4 TPITaper of Tailstock CenterMT 5Tailstock Quill Travel6.5” (165 mm)Tailstock Quill Diameter3.35” (85 mm)Main Drive Motor15 HPCoolant Pump1/8 HPCompound Rest Travel7.87” (200 mm)Cross Slide Travel14.76\" (375 mm)Machine Length137” (3470 mm)Machine Width41” (1030 mm)Machine Height50” (1260 mm)Packing Length140” (3560mm)Packing Width45” (1150 mm)Packing Height76” (1940 mm)Net Weight6600 lbsGross Weight6900 lbsStandard Accessories
  • Face plate
  • Steady rest
  • Follow rest
  • Centers
  • Coolant system
  • 4-way tool post
  • 2-speed tailstock
  • Safety pin mechanism for headstock gear protection
  • Auto lubrication for carriage
  • Longitudinal carriage stops
  • Work light
  • Rear splash guard
  • Chuck guard with microswitch
  • Tools and tool box
  Optional Accessories
  • 3-Jaw scroll chuck
  • 4-Jaw independent chuck
  • Back plate (only if chuck is plain back)
  • 4-position carriage stop
  • Micro carriage stop
  • Live centers
  • Rear cutter rest
  • Taper turning attachment
  • Change gears for D.P. and module threads
  • Change gears for 2 TPI and 3 TPI threads
  • 5C lever collet closer
  • Driving plate
  • ALORIS-style quick change tool post
  • Digital Readout (DRO)
  • Chip guard
  • Hydraulic copying attachment
  • ID/OD grinder
  Freight ShippingWe will compare shipping rates among UPS Freight, DHE, ESTES, RoadRunner and others to find you the best rate.

  For freight shipping quotes, please let us know 1) your destination zip code and 2) whether you have a forklift to unload machine tools.

  Questions?

  If you have any questions, please let us know we’ll be happy to help.

  if You have any questions regarding this item, please let us know we\'ll be happy to help.
  You can also reach us at Eisen Machinery toll free [phone removed by ].