Heat.net

Heat.net Store Home


Electric 12V 60W 100W PWM Brushless Water Pump Engine Auxiliary Circulation Pump For Sale


Electric 12V 60W 100W PWM Brushless Water Pump Engine Auxiliary Circulation Pump
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

Electric 12V 60W 100W PWM Brushless Water Pump Engine Auxiliary Circulation Pump:
$12.34

Electric 12V 60W 100W PWM Brushless Water Pump Engine Auxiliary Circulation Pump
Electric 12V 60W 100W PWM Brushless Water Pump Engine Auxiliary Circulation PumpHere for sale are DC12V brushless water pumps, we have 60W and 100W two different types for option, we will send a connecting wire freely for each pump, we also provide the PWM Signal Generator for the pumps which can adjust the working speed of the pumps, both the 60W and 90W pump can work separately without the PWM Signal Generator, the PWM Signal Generator is mainly for speed adjusting, buyers pls make clearly of this before buying and choose the correct items as you need!Important Note:The pumps must work with enough water.Do not test the pump without water, or it will detect the lack of water and stop working!Package Included
Mode A:Only 1PCS PWM SignalGenerator.
Mode B:1PCS 60W DC12V Pump W/ Connecting Wire.
ModeC:1PCS 100W DC12V Pump W/ Connecting Wire.
ModeD:1PCS 60W DC12V Pump W/ Connecting Wire+1PCS PWM SignalGenerator.
ModeE:1PCS 60W DC12V Pump W/ Connecting Wire+1PCS PWM SignalGenerator.Following is the detailed description for the items, pls check carefully and coose the correct Mode as you need!DC12V 60W Brushless Water Pump
This versatile water pump is designed specifically for electric vehicle cooling systems, ensuring excellent quality and reliability. Its exceptional design allows for operation in extreme environments, ranging from minus 40 degrees Celsius to plus 120 degrees Celsius, ensuring lasting and stable performance. Utilizing a brushless DC motor and controlled through PWM, it effortlessly adjusts its speed, showcasing remarkable efficiency, low noise, and high flow rates. Its unique physical isolation design ensures that the pump rotor, motor stator, and drive circuit are separated from the water, ensuring safety and dependability.
Equipped with rubber damping brackets for easy installation, The water pump has quick-connect ports for both the inlet and outlet, which can be connected to fittings from the (Norma-PS3-NW16) series. With outstanding waterproof performance, it can also be used as a submersible pump, making it suitable for a wide range of applications, including automotive cooling systems, lithium battery cooling systems, server water cooling systems, hydroponics water circulation, fish tank water circulation, garden irrigation, RV water supply, solar water pumps, and much more.
Each water pump will send a connection line, the orange line is connected to the positive pole of the power supply, the black line is connected to the negative pole of the power supply, and the green line is the PWM speed control line (if you do not need speed control, you can not connect it)Specifications:
Rated Voltage: DC 12V
Operating Voltage: DC 8.5V~16V
Rated Current: 5A
Power: 60W
Max Head: 8M
Max Flow: 40L/Min(10.57 GPM)
Noise Class form 1M : ≤45dB
Waterproof Class:IPX7
OD of Inlet: 22 mm(NW16)
OD of Outlet: 22 mm(NW16)
Net Weight: 545g (1.2lb)
Remarks: Not Self-priming
Liquid Temperature:-40°-120°C
Ambient Temperature:-40°-120°C
Motor Type:Brushless DC motor
Ideal Life Time: 30,000 Hours
Working Fluids: Water, Antifreeze, Low viscosity oil, Pesticide, Acid-alkali solution.
Power Supply: DC power supply, battery, solar powered
If PWM Speed Control *is* Used
If there is no PWM signal within 2 seconds of power-on, the default mode of full speed operation will be used.
If there is a valid PWM signal, a speed-proportional response to a commanded 15-90% duty cycle will be delivered.
+12V PWM controlled,
Recommended PWM frequency: 50Hz to 200Hz (nominal = 100Hz)
Recommended PWM Duty range: 15 - 90%
The water pump operates at its minimum speed when the PWM duty cycle is 15%, and it reaches its maximum speed when the PWM duty cycle is greater than 90%.Please Note:
*The water pump is driven by a brushless DC motor. Ensure that the positive and negative poles are not reversed, and the operating voltage range is DC8.5V to 16V.
*The maximum power of the water pump is 60 watts. Use a power supply with a capacity greater than 60W; otherwise, the pump may not function properly.
*The water pump needs to have water for testing; otherwise, it will detect the lack of water and stop working. Testing the water pump without water will cause it to start and stop multiple times, eventually leading to a protective shutdown.
*The water pump is not self-priming, so the water inlet should be below the water level, or the entire pump can be submerged in water (the pump is waterproof and can be used as a submersible pump).
DC12V 100W Brushless Water Pump
This versatile water pump is designed specifically for electric vehicle cooling systems, ensuring excellent quality and reliability. Its exceptional design allows for operation in extreme environments, ranging from minus 40 degrees Celsius to plus 120 degrees Celsius, ensuring lasting and stable performance. Utilizing a brushless DC motor and controlled through PWM, it effortlessly adjusts its speed, showcasing remarkable efficiency, low noise, and high flow rates. Its unique physical isolation design ensures that the pump rotor, motor stator, and drive circuit are separated from the water, ensuring safety and dependability.The pump body is made of aluminum alloy, which is sturdy and has excellent waterproof performance. It is widely used in a variety of fields, including automotive cooling systems, lithium battery cooling systems, server water cooling systems, soilless cultivation water circulation, fish tank water circulation, garden watering, RV water supply, underfloor heating heat circulation, and solar water pumps.



Specification:

Brand: BLDCC

Rated Voltage: DC 12V

Operating Voltage: DC 8.5V ~ 16V

Rated Current: 7.5A

Power: 100W (Max)

Max Head: 9M

Max Flow: 45L/Min (12 GPM)

Noise Class form 1M: ≤45dB

Waterproof Class: IP68

OD of Inlet: 16&22 mm

OD of Outlet: 16&22 mm

Remarks: Not Self-priming

Liquid Temperature:-40°-120°C

Ambient Temperature:-40°-120°C

Motor Type: Brushless DC motor

Ideal Life Time: 30,000 Hours

Net Weight: 835g

Package Weight: 950g

Working Fluids: Water, Antifreeze, Low viscosity oil,etc.

Power Supply: DC power supply, battery, solar powered


If PWM Speed Control *is* Used

If there is no PWM signal within 2 seconds of power-on, the default mode of full speed operation will be used.

If there is a valid PWM signal, a speed-proportional response to a commanded 13-90% duty cycle will be delivered.

+12V PWM controlled,

Recommended PWM frequency: 50Hz to 200Hz (nominal = 100Hz)

Recommended PWM Duty range: 13 - 90%

The water pump operates at its minimum speed when the PWM duty cycle is 13%, and it reaches its maximum speed when the PWM duty cycle is greater than 90%.


Please Note:

1, The positive and negative poles of the pump must be connected correctly to prevent damage to the pump. The working voltage range of the pump is DC8.5V to 16V.

2, The maximum power of the pump is 100 watts. A power supply with a capacity greater than 100W must be used, otherwise the pump may not work properly.

3, The pump should only be used with clean liquid to prevent clogging and damage to the pump. If the liquid contains granular impurities, a filter should be installed at the inlet to prevent the impurities from entering the pump.

4, The water pump needs to have water for testing; otherwise, it will detect the lack of water and stop working. Testing the water pump without water will cause it to start and stop multiple times, eventually leading to a protective shutdown.

5, The pump has no self-priming ability. The pump inlet must be below the water surface for the pump to work. Alternatively, the entire pump can be immersed in water. The pump is waterproof and can be used as a submersible pump.

We will send a connecting wire with each pump, the orange wire is connected to the positive pole of the power supply, the black wire is connected to the negative pole of the power supply, and the green wire is the PWM speed control wire (if you do not need speed control, just donot connect the gree wire).


PWM Signal Generator
PWM signal generator is a device that provides electrical signals at a variety of frequencies, square wave, and output levels.
It is used as a signal source or excitation source for testing. Widely used in production practice and technology.
Features:
1>.With outer casing; 2>.LCD high definition display; 3>.Support UART; 4>.Support frequency adjustment; 5>.Support duty cycle adjustment; 6>.High precision detection; 7>.Support power-down memory function; 8>.1-Channel PWM output.
Parameters:
1>.Product name: PWM Signal Generator; 2>.Model: XY-PWM; 3>.Work voltage: DC 3.3V-30V; 4>.Frequency range:1Hz~150KHz; 5>.Frequency accuracy:2%; 6>.Duty cycle range:0.00%-100%; 7>.Output Current: About 5-30mA; 8>.Output amplitude: Same to input voltage; 9>.Size:79*43*27mm; 10>.Operating temperature:-20℃~70℃;
Frequency set range:
Enter the settings interface when short press any button ‘FREQ+’ or ‘FREQ-’ in the normal running status to select frequency range. Automatically switch frequency range. Pay attention to the position where the decimal point moves when the button is pressed. Display ‘XXX’. No decimal point, The minimum frequency is 1Hz. The frequency range is 1Hz ~ 999Hz. Display ‘X.XX’. The decimal point is the penultimate, The minimum frequency is 0.01KHz.The frequency range is 1.00KHz ~ 9.99KHz. Display ‘XX.X’. The decimal point is the third last, The minimum frequency is 0.1KHz.The frequency range is 10.0KHz ~ 99.9KHz. Display ‘X.X.X’. The decimal point is fully lit, The minimum frequency is 1KHz.The frequency range is 1KHz ~ 150KHz. For example: Display ‘100’ means PWM output frequency is 100Hz; Display ‘1.01’ means PWM output frequency is 1.01KHz; Display ‘54.1’ means PWM output frequency is 54.1KHz; Display ‘1.2.4’ means PWM output frequency is 124KHz;
Duty cycle set range:
Enter the settings interface when short press any button ‘DUTY+’ or ‘DUTY-’ in the normal running status to select duty cycle. Automatically switch frequency range. Duty cycle range is 0.00%-100%.
Use steps:
1>.Connect to power supply; 2>.Short or long press button ‘FREQ+’ or ‘FREQ-’ to set frequency; 3>.Short or long press button ‘DUTY+’ or ‘DUTY-’ to set duty cycle; 4>.Connect to load.
UART communication and parameter settings
The system supports UART data upload and parameter setting functions (TTL level); UART: 9600, 8, 1 1>.Set PWM frequency: ‘F101’:Set frequency is 101Hz.‘101’ can by replace by 001~999; ‘F1.05’:Set frequency is 1.05KHz.‘1.05’ can by replace by 1.00~9.99; ‘F10.5’:Set frequency is 10.5KHz.‘10.5’ can by replace by 10.0~99.9; ‘F1.0.5’:Set frequency is 105KHz.‘1.0.5’ can by replace by 1.0.0~1.5.0; 2>.Set PWM duty cycle: ‘DXXX’: Set duty cycle is XXX. ‘XXX’ can be 000-100. E.g:‘D051’ means PWN duty cycle is be set as 51%. 3>.Read set parameter: Send ‘read’ and then get parameter. 4>.Return value: Return ‘DOWN’: Set success. Return ‘FALL’: Set fail.
Application:
1>.Square wave signal generator, generating square wave signal for experimental development; 2>.Used to generate a square wave signal that controls the motor driver; 3>.Generate adjustable pulses for use by the MCU; 4>.Dimmer; 5>.Speed governor;Note: It\'s 1-channel PWM output signals are the same. They can not adjust independently.
About Shipping

    • 1.Goods are in stock in USA Warehouses, buyer can get the parcel around 3-7 business days.

    • 2.We ship toUSA address ONLY,items are generally shipped out within1-3 business daysafter receiving confirmed payment, we provide tracking number freely for all buyers.

    • 3.Please confirm your shipping address is correct, we are not responsible for undeliverable address. We reserve the right to charge shipping fee for returned items due to wrong address.

      • 4. This listing only includes the item price and shipping charges, Import custom duty tax fee are not included.
      • Any potential custom duty tax fee are buyer\'s responsibility, buyers please make clearly of this point before order.


Buy Now

Other Related Items:



Related Items:

DC 12V Linear Actuator 1320lbs W/ Remote Controller Electric Motor 6000N Lift IG picture

DC 12V Linear Actuator 1320lbs W/ Remote Controller Electric Motor 6000N Lift IG

$99.99



12V Electric Linear Actuator (2

12V Electric Linear Actuator (2"-40" stroke, 100-400 lbs. force) - PA-04 model

$166.95



12V 24V 3000N 660lb Electric Linear Actuator Motor 2

12V 24V 3000N 660lb Electric Linear Actuator Motor 2"~ 40" Heavy Duty Waterproof

$134.63