When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Item Description:Item Features - Condition:New
- Placement on Vehicle:In tank
- Color:As picture shows
- Manufacturer Warranty:1 Year
Vehicle Fitment - 2010-2012 Hyundai Santa Fe
- 2011-2013 Kia Sorento
Item Include - 1xFuel Pump Module Assenbly
When do you need to replace - Engine Stuttering
- Engine Surges
- Reduced Fuel Efficiency
- High-Pitched Noises
- Engine Won't Start
How to InstallFuel Pump Electric Fuel Pump Module Assembly For 2011-13 Kia Sorento 2.4L 3.5L E9029M
Item Description:
Item Features
- Condition:New
- Placement on Vehicle:In tank
- Color:As picture shows
- Manufacturer Warranty:1 Year
Vehicle Fitment
- 2010-2012 Hyundai Santa Fe
- 2011-2013 Kia Sorento
Item Include
- 1xFuel Pump Module Assenbly
When do you need to replace
- Engine Stuttering
- Engine Surges
- Reduced Fuel Efficiency
- High-Pitched Noises
- Engine Won't Start
How to InstallFuel Pump
- 1.Park the vehicle on a firm, level surface and set the parking brake.
- 2.Find the fuel pump, then open the fuel cap and have an assistant turn the key to the ON position while you listen at the filler opening. If The fuel pump no sound is made, replacing the pump may be necessary.
- 3.Find and verify the fuel pump fuse and relay.
- 4.If the fuse is blown, replace it with a fuse of the same amperage. Check fuel pump operation. If the fuel pump works, your job is done.
- 5.If the fuse and relay are functional, check for power and ground at the fuel pump. Removing the fuel tank or the back seat may be necessary. If there is power and ground at the pump, then the pump is faulty.
- 6.Relieve the fuel system pressure. Disconnect the negative battery cable.
- 7.Siphon or drain as much fuel as possible from the fuel tank. Disconnect the filler tube hose and the electrical connection to the pump.
- 8.Support the fuel tank with a jack and a block of wood. Remove any retaining straps or bolts holding the tank to the frame. Lower the tank.
- 9.Disconnect the fuel lines and remove the fuel pump from the tank.
- 10.Compare the new fuel pump with the original to verify that you have the correct part. Install the new fuel pump.
- 11.Connect the fuel lines to the pump. Lift the fuel tank up and install the retaining strap. Reconnect the filler tube hose and the electrical connector.
- 12.Reconnect the negative battery cable. Fill the tank with gas. Conduct a road test to confirm a successful repair.
Note
- If you have any question about the product, please contact us before buying, we will give you a best reply in time.
- We are galde to offer quality service and vehicle parts to you, any sale questions please message us before open case or response, we will give you the best solution.
Item SpecificsBrand autosuperstarPlacement on Vehicle On the EngineManufacturer Part Number 10461703Vintage Car Part NoPerformance Part YesUniversal Fitment NoInternal Or Not InternalInterchange Part Number E9029MFitment Type Direct ReplacementManufacturer Warranty 1 YearGallons Per Hour (GPH) 55-65Color WhiteCustom Bundle NoSize of Outlet 5/16Modified Item NoMounting Hardware Included NoFuel Pump Type ElectricalCompatible Fuel GasPSI 45-55Quantity of Inlet 2Type of Inlet StrainerType of Outlet Female Quick ConnectPackage Included As the picture shows
Payment
1.90% packages willbeshippedwithin24 located in CA or NJ or GA (ItemstobeReturnedmustbein brand wewillofferyourefundorreplacement after if order by Us
Ifthere's anyquestionor problem, docontactus please. Our Customer Servicersare always here to answer the question and solve the problem.
Note itfitsyourvehicle.
If there's any question about the conpatibilities, contact us please.
DESCRIPTIONPAYMENTSHIPPINGRETURN POLICYCONTACT US Excellent Delivery
Shop CategoryStore Home Towing Mirrors 2 pcs Wheel Spacers Wheel Hub Bearing Heater Core 4 pcs Wheel Spacers Door Handle Windshield Wiper Motor Fuel Pump Air Parking Heater Window Regulator Throttle Body Window Switch AC Compressor ABS Wheel Speed Sensor Roof Rack Window Visor AC Condenser Bumper 4 pcs Wheel hub Bearing Tonneau Cover Sun Visor A/C Evaporator Core Spoiler Wing Headlights Assembly Fuel Injector Dash Cover Oil Pan Fender Flares Center Console Timing Belt Kit Timing Chain Kit Door Lock Actuator AC Vent Electric Winch Tow Detonation Knock Sensor Horn OtherHot Item 1 pc Inside Interior Door Handle RH Right Passenger Side For Ford F-150 2009-14 USD 12.59 4 pcs1.5" 8x6.5 to 8x180 8 Lug Wheel Spacers Adapter For CHEVY For GMC USD 103.83 Door Handle Inside Interior Driver Left LH For Chevy C1500 Truck Suburban K2500 USD 11.96 Front Window Switch Bezel For Chevy Silverado GMC Sierra 1500 2500 3500 2004-06 USD 18.39 130PSI 12V Air Compressor Kit For Train Horns Air Horn Air Suspension Kit USD 69.91 Help & InfoPayment PolicyShipping PolicyReturn PolicyFAQAbout UsNew List Item 2x Rear Wheel Hub Bearing Assembly For 04-11 Chevy Aveo Aveo 5 Pontiac Wave G3 USD 58.09 Rear Wheel Hub Bearing w/ABS For 04-11 Chevy Aveo5 Pontiac G3 Wave 1.6L 541009 USD 37.99 2x Rear Wheel Bearing Hub W/ABS For 05-10 Pontiac G3 Wave Chevy Aveo 4 Lug 1.6L USD 57.99 4 Wheel Drive Selector Switch For 01-02 Chevy Gmc Sierra Suburban 2500 3500 1500 USD 23.99 Rear Left Right Wheel Hub Bearing For 2004-2006 Nissan Altima 04-08 Maxima USD 54.99 Electric Fuel Pump Module Assembly For 2011-13 Kia Sorento 2.4L 3.5L E9029M
Item Description:
Item Features
- Condition:New
- Placement on Vehicle:In tank
- Color:As picture shows
- Manufacturer Warranty:1 Year
Vehicle Fitment
- 2010-2012 Hyundai Santa Fe
- 2011-2013 Kia Sorento
Item Include
- 1xFuel Pump Module Assenbly
When do you need to replace
- Engine Stuttering
- Engine Surges
- Reduced Fuel Efficiency
- High-Pitched Noises
- Engine Won't Start
How to InstallFuel Pump
- 1.Park the vehicle on a firm, level surface and set the parking brake.
- 2.Find the fuel pump, then open the fuel cap and have an assistant turn the key to the ON position while you listen at the filler opening. If The fuel pump no sound is made, replacing the pump may be necessary.
- 3.Find and verify the fuel pump fuse and relay.
- 4.If the fuse is blown, replace it with a fuse of the same amperage. Check fuel pump operation. If the fuel pump works, your job is done.
- 5.If the fuse and relay are functional, check for power and ground at the fuel pump. Removing the fuel tank or the back seat may be necessary. If there is power and ground at the pump, then the pump is faulty.
- 6.Relieve the fuel system pressure. Disconnect the negative battery cable.
- 7.Siphon or drain as much fuel as possible from the fuel tank. Disconnect the filler tube hose and the electrical connection to the pump.
- 8.Support the fuel tank with a jack and a block of wood. Remove any retaining straps or bolts holding the tank to the frame. Lower the tank.
- 9.Disconnect the fuel lines and remove the fuel pump from the tank.
- 10.Compare the new fuel pump with the original to verify that you have the correct part. Install the new fuel pump.
- 11.Connect the fuel lines to the pump. Lift the fuel tank up and install the retaining strap. Reconnect the filler tube hose and the electrical connector.
- 12.Reconnect the negative battery cable. Fill the tank with gas. Conduct a road test to confirm a successful repair.
Note
- If you have any question about the product, please contact us before buying, we will give you a best reply in time.
- We are galde to offer quality service and vehicle parts to you, any sale questions please message us before open case or response, we will give you the best solution.
PaymentShippingPolicyContact UsNote
1.90% packages willbeshippedwithin24 located in CA or NJ or GA (ItemstobeReturnedmustbein brand wewillofferyourefundorreplacement after if order by
Ifthere's anyquestionor problem, docontactus please. Our Customer Servicersare always here to answer the question and solve the problem.
itfitsyourvehicle.
If there's any question about the conpatibilities, contact us please.
All rights reserved.
