Electric Water Flosser Jet Portable Oral Irrigator Tooth Cleaner Floss Pick For Sale

1. Put the power plug into an electrial outlet.
2. Remove the lid of tank. Fill the tank with water. Press the tank down firmly.
3. Insert the tip into the center of the handle till the end. To remove the tip from the handle,press and hold the tip release button,then pull the tip out of the handle.
4. Press ON/OFF to start the device. Turn the pressure control knob clockwise to start the device and adjust water pressure.
5. Put the tip into the the mouth,spray toward the teeth, and clean the teeth one by one along the gum line.
6. When the tip position is lower than the water level of the tank, even if the water fosser is not working, water will flow out of the tip. This is a natural phenomenon, so please do not put the handle on the table, be sure to put the handle on the bracket after using.

1. Do not handle plug with wet hands.
2. Do not place product in water or other liquid.
3. Do not use while bathing.
4. Do not reach product that has fallen into water. Unplug immediately.
5. Do not spary water under the tongue, into the ear,nose or other delicate areas. Pressure generated by this product may cause damage to these areas.
6. Only use waterpulse brand tips and accessories.
7. To prevent clogging the pumps and handle, do not add granular objects such as salt in the tank.
8. Keep electrical cord away from heated surfaces.
9. Fill the tank with water or solution recommended by professional dentist.
10. Do not use if your mouth or tongue has an open wound.
11. Do not let children play with this product.

Package Included:

5 x Water Flossing Tips

1xAdapter (US Plug)

1 xEnglish Manual