When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
ELECTRO-VOICE CPS2.12 - NEW-IN-THE-BOX (not MKII Series)
Contractor Precision Series Class‑H Power Amplifier
Designed for the contractor, the CPS 2.12 feature 2-RU chassis, Phoenix-type connectors for inputs and outputs, pre-programmable power-on delay, easy power-on via remote contact closures, rear panel attenuators, and a switchable 50 Hz high-pass filter. Like the CPS multi-channel amplifiers, the CPS 2.12 also includes a module slot for the RCM-810 remote-control module, enabling networking features for system diagnostics and control via IRIS-Net Up to 2 x 1800 W into 2 ohms
- Phoenix-type input and output connections
- Remote power-on/off contact
- Rear-mounted attenuators
- Programmable time for custom power-on delay settings
- Module slot for optional RCM-810 card, allowing IRIS-Net control and monitoring
- Switchable 50 Hz high-pass filter
- Three-stage front-to-rear fans
- Class-H design
- Complete protection Impedance : 2 Ohm, 4 Ohm, 8 Ohm
Maximum Midband Output Power THD = 1%, 1 kHz, Dual Channel : 1800W, 1200W, 750W
Rated Output Power THD < 0.1%, 20 Hz...20 kHz : -, 1100W, 550W
Maximum Single Channel Output Power Dynamic-Headroom, IHF-A : 3400W, 1800W, 950W
Maximum Single Channel Output Power Continuous, 1 kHz : 2400W, 1500W, 850W
Maximum Bridged Output Power THD = 1%, 1 kHz : -, 3600W, 2400W
Maximum RMS Voltage Swing THD = 1%, 1 kHz : 90.6 V
Power Bandwidth THD = 1%, ref. 1 kHz, half power @ 4 Ohm : < 10 Hz...30 kHz
Voltage Gain, ref. 1 kHz : 32.0 dB
Input Sensitivity Rated power @ 8 Ohm, 1 kHz : +6.6 dBu (1.66 Vrms)
THD at rated output power MBW = 80 kHz, 1 kHz : < 0.03%
IMD-SMPTE, 60 Hz, 7 kHz : < 0.1%
DIM30, 3.15 kHz, 15 kHz : < 0.05%
Maximum Input Level : +21 dBu (8.69 V RMS) Crosstalk : < -80 dB
Frequency Response, ref. 1 kHz : 10 Hz...40 kHz (±1 dB)
Input Impedance, active balanced ref. 1 kHz, at rated output power : 20 kOhm
Damping Factor, 1 kHz : > 300
Slew Rate : 30 V/us
Signal to Noise Ratio Amplifier A-weighted : > 110 dB
Output Noise, A-weighted : < -71 dBu
Output Stage Topology : Class H
Power Requirements : 120V
Power Consumption 1/8 maximum output power @ 4 Ohm : 850W
Protection : Audio limiters, High temperature, DC, HF, Back-EMF, Peak current limiters, Inrush current limiters, Turnon delay
Cooling : Front-to-rear, 3-stage-fans
Dimensions (W x H x D), mm : 483 x 88.1 x 421.5
Weight : 39.0 lbs / 17.7 kg