When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Description:
#2701 Performer EPS intake manifold is designed for 1986 and earlier 262-400 cubic-inch Chevys. Dual-plane, low-rise design with a 180-degree firing order greatly improves torque over a wide rpm range for excellent throttle response. With that the Performer EPS intake manifold has a runner design that\'s \"tuned\" for peak torque at 3500 rpm on a 350-inch engine making it ideal for power from off-idle to 5500 rpm. Dyno tests showed gains of 5 hp and 9 ft-lbs. of torque over the Performer manifold #2101 on a 350 Chevy. From 3000 to 4500 rpm, the power increases averaged 5+ ft-lbs. of torque for more performance where you need it most.
Specifications:
Material Type: Aluminum
Finish: Natural
Carburetor Quantity: 1
Intake Section Included: Complete
RPM Range: Idle-5,500
EGR: No
Port Height: 1.85
Fuel System Type: Carbureted
Bolt Hole Pattern: 5.160\" x 5.625\"
Sold in Quantity: Each
Intake Manifold Type: Dual Plane
Carburetor Flange Type: 4-Barrel Square Bore
MFG. Part #: 2701
Gaskets Included: No
Overall Height: 4.25
Port Width: 1.15
Mounted Height: 4.25
Notes: 500-650 CFM carb. is recommended
OE Number:
2701
Will Fit Following Models:
For 1955-1986 Small Block Chevy
Note: Please compare your item carefully with photo and OE Number to avoid mistake!!!
On Dec 12, 2023 at 05:09:40 PST, seller added the following information:
