Heat.net

Heat.net Store Home


Honeywell S8910U1000 Hot Surface Ignition Control Module For Sale


Honeywell S8910U1000 Hot Surface Ignition Control Module
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.

Buy Now

Honeywell S8910U1000 Hot Surface Ignition Control Module:
$30.00

NEW OLD STOCK NEVER USED
DescriptionUniversal Hot Surface Ignition Module is designed to provide easy field replacement of a wide range of hot surface ignition modules manufactured by Honeywell, Robertshaw and White-Rodgers. The S8910U Module provides operating control of a direct ignition system using a 120 Vac hot surface igniter.

Features
  • Replaces many White-Rodgers, Robertshaw and Honeywell hot surface ignition models.
  • For 120 Vac (up to 5.0A) surface igniter (Norton 201/271 or equivalent).
  • For local (single rod) or remote (dual rod) rectification type flame sensing.
  • Contains easy-to-use instructions plus the accessories required to adapt the existing hot surface ignition module.
  • Provides one or three ignition trials (four-second or seven-second trials) per call for heat; prepurge of 32 seconds or less; up to 96 seconds between purge trial times.
  • Temperature range is -40 to +175 F (-40 to +79 C).


Specifications
  • Description: Provide electronic control of direct hot surface ignition systems used on gas fired furnaces, boilers, and other heating appliances.
  • Ignition System Type: Direct Hot Surface Ignition
  • Ignition Sequence: The number of trials for ignition and trial time is determined by the selection tab. If a selection tab is not installed, the module will operate at four seconds trial time and one ignition trial.
  • Typical Gas Control: VR8205, VR8305
  • Type of Gas: Natural or LP
  • Flame Sense: Single Rod or Two rods
  • Ignition Source: Line Voltage (120 VAC) Hot Surface Element (Norton Model 201 or 270)
  • Prepurge: 32 Seconds
  • Ignition Trials To Lockout: 1 or 3
  • Lockout Timing: 4 Sec. or 7 Sec
  • Ignition Trial Time: 4 sec. or 7 sec.
  • Maximum Valve Load @ 24 Vac (Amps): 2A
  • Typical Ignition Hardware: Norton 201, Norton 271, Q354A
  • Dimensions: 5 1/4 in. high x 4 1/16 in. wide x 1 15/16 in. long
  • Electrical Ratings: 24 Vac
  • Frequency: 60 Hz
  • Max Ambient Temperature: -40 F to +175 F
  • Between Trial Time: (2) 96 sec. – 3 trial mode only
  • Flame Failure Response Time: 1.5 sec

Buy Now

Other Related Items:



Related Items:

Honeywell S8910U 1000 Universal Hot Surface Ignition FULL KIT picture

Honeywell S8910U 1000 Universal Hot Surface Ignition FULL KIT

$35.00



90-DAY WARRANTY S8910U 1000 Honeywell Hot Surface Ignition Control Module picture

90-DAY WARRANTY S8910U 1000 Honeywell Hot Surface Ignition Control Module

$81.00



Honeywell S8910U 1000  Universal Hot Surface Ignition Module used  #D23 picture

Honeywell S8910U 1000 Universal Hot Surface Ignition Module used #D23

$34.99