Heat.net

Heat.net Store Home


ICM340 Condensation Control System (1-3 Minute Time Delay) For Sale


ICM340 Condensation Control System (1-3 Minute Time Delay)


This item has been shown 22 times.

Buy Now

ICM340 Condensation Control System (1-3 Minute Time Delay):
$23

Item is NEW in OEM packaging ICM *ICM340C Condensation Control. Replaces Water Guard: 401475


Product Description: The ICM 340 Condensation Control is used to prevent the overflowing of an evaporator condensation pan. Overflow problems can occur from a slow or blocked condensate drain or condensate pump failure. Epoxy encapsulated circuit provides maximum strength against moisture and allows use in extreme environmental conditions. It is recommended for package units, vertical coils, stud mounts, split systems, slant coils and water heaters.


Product Features: Two sensors for water detection adjustable delay before break time to prevent nuisance trips Quick-Connect connection terminals (1/4 inch) to provide easy hookup provides maximum protection against moisture and allows use in extreme environmental conditions


Mode of Operation - With proper mounting of the sensors, the ICM340 Condensation Control System will detect the presence of water before overflow can occur. If water is detected for the entire time period selected on the control (60-180 seconds), the 24 VAC output from the T'stat Output terminal is interrupted, the control is locked out, and the optional overflow LED is lit. If water is detected, but not for the entire time period selected, no interruption of the 24 VAC from the T'stat Output terminal occurs. This eliminates nuisance trips and unnecessary lockouts. Removal of the water automatically resets the ICM340 after a lockout condition. Every control is shipped with: (2) sensors, (2) mounting clips, (2) self-stick adhesive clips, and detailed instructions with diagrams for installation and troubleshooting. Optional overflow LED accessory kit (ACH55) available.


Specifications:

Voltage: 18/30 VAC

Output: 24 VAC to thermostat/cool control 24 VAC to optional overflow LED

Output Rating: 2 amps

Delay Before Trip: 1-3 Minutes

Frequency: 50-60 Hz

Maximum Operating/Storage Relative Humidity: 95% non-condensing

Storage Temperature: -40°F to 185°F (-40°C to 85°C)


Buy Now

Other Related Items:



Honeywell Tradeline Dp3030b 5002 3 Pole 32 Amp New Heating & Cooling  picture
Honeywell Tradeline Dp3030b 5002 3 Pole 32 Amp New Heating & Cooling


New Johnson Controls P66bab-1c Condenser Fan Speed Control 190-150 Pskg picture
New Johnson Controls P66bab-1c Condenser Fan Speed Control 190-150 Pskg


Emerson 24a34-4 Electric Heat Sequencer picture
Emerson 24a34-4 Electric Heat Sequencer


(q10-5) 1 Red Bird Trip Trap S024d Trip Indicator picture
(q10-5) 1 Red Bird Trip Trap S024d Trip Indicator


031-00940e-001 Rev G picture
031-00940e-001 Rev G


Emerson E2 Controller Rx400 picture
Emerson E2 Controller Rx400


Fantech In-line Backdraft Damper, 6 In. Dia. Silver  Galvanized Steel Rsk6  - 1 picture
Fantech In-line Backdraft Damper, 6 In. Dia. Silver Galvanized Steel Rsk6 - 1


York 031-00804c Rev C Chiller Starter Control Module Board picture
York 031-00804c Rev C Chiller Starter Control Module Board