When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
- Humidity Sensor
- Solid Sockets
- Reliable Plug
- Package Content
Humidity Sensor
Humidity Measure Range: 5%-99.99%RH
Humidity Control Range : 5%-99%RH
Accuracy: ±3%RH
Resolution: 1%RH
Sensor Length:6.56ft (2m)
Solid Sockets
Power Output: Max. 10A, 100V ~240V AC
Work 1:To control humidifier
Work 2:To control dehumidifier
Socket: 3.3x1.7x1inch (85x42x24mm)
Reliable Plug
US Standard
Power Consumption:<3W
Input Power Cable Length: 5ft (1.5m )
Output Power Cable Length:1ft (30cm)
Package ContentA nice packaging for a gift choice
Package included:
1x IHC-200-WiFi humidity controller
1 x User manual
Wi-Fi Humidity Controller IHC-200
Notes:
- Do not put probes or metal wire into the fire.
- Do not put probes into the water, it may lead to inaccurate measurements.
- Only support 2.4GHz Wi-Fi (Support IEEE 802.11b/g/n).
Multi-scenario Application
How to connect the IHC-200 WiFi with APP (INKBIRD)?
- Dual Display Windows】:
Display the set humidity value and the measured humidity value at the same time with 2 screens. - Dual Relay Output】:
Support both humidifying equipment and dehumidifying equipment. - Humidity Calibration】:
Support humidity calibration and dehumidification control delay protection. - Remote Control】:
Connect the IHC-200 Wi-Fi humidity controller to 2.4GHz Wi-Fi, and monitor or adjust the humidity on your phone through the app at any time anywhere. - High/Low Humidity Alarm】:
Set a High/Low Humidity Alarm, which alarms and reminds you if the humidity value exceeds the setting value, and alarms when a probe error occurs. - Alarm Stop】:
Press any button to turn off the alarm sound or you can turn it off on your phone.
- Support humidity calibration and dehumidification control delay protection.
- Maximum Power: 1200W(120Vac)
For Example:
You would like to set the range for 47% to 55%
- Set "HS" (Target Humidity) as 50.
- Set "HD" (Humidification Differential Value) as 3.
- Set "DD" (Dehumidification Differential Value) as 5.
Set "HS" (Target Humidity) as 50.
Set "HD" (Humidification Differential Value) as 3.
Set "DD" (Dehumidification Differential Value) as 5.