Inkbird ITC-308 Thermostats Programmable Homebrewing Temperature Controller HeatDetails
Inkbird ITC-308 Digital Temperature Controller(Only Heating and Cooling)
Product Description:
Mainfeatures:
-Plug and play design, easy to use;
-Dual relay output, be able to connect with refrigeration and heating equipmentat the same time;
-Support reading with Centigrade or Fahrenheit unit;
-Maximum output load: 1000W(110V)/2000W(220V);
-Dual display window, be able to display measured temperature and settemperature at the same time;
-Temperature calibration;
-Compressor delay protection for refrigeration control High and low temperaturealarms are available;
-Over-temperature and sensor fault alarm
-Heating/Cooling differential function could be set separately for refrigerationand heating to protect temperature controller from violent change.
Specification:
-Temperature Control Range : -50~120 °C / -58~248 ° F
-Temperature Resolution: 0.1 ° C / 0.1° F Temperature Accuracy: ±1°C (-50 ~70°C) / ±1°F (-50 ~ 160° F)
-Temperature Control Mode :On/Off Control, Heating and Cooling
-Input Power: 100 ~240VAC, 50Hz/60Hz
-Temperature Control Output: Max. 8.5A, 100V ~240V AC
-Buzzer Alarm: High and Low Temperature Alarm
-Sensor Type: NTC sensor (Including)
-Sensor Length: 2m / 6.56ft
-Input Power Cable Length: 1.5m (5ft)
-Output Power Cable Length: 30cm (1ft)
-Dimension Body: 140x68x33mm (5.5x2.7x1.3inch)
-Socket: 85x42x24mm(3.3x1.7x1inch)
-Ambient Temperature: -30~ 75 ° C / -22~ 167 ° F
-Storage Temperature: -20~ 60 ° C / -4~ 140 ° F
-Humidity 20~85% (No Condensate)
-Warranty: 1 Year
Package Content:
1x Inkbird ITC-308 temp controller thermostat;(US Plug)
1x Manual
- Shipping Policy
- Payment Method
- Returns Policy
Shipping PolicyPayment MethodReturns Policy
Copyright©2017 DataCaciques
Main features
- Plug and play design, easy to use
- Capable of raising or lowering temperature dependent upon current settings and ambient conditions
- Display measurements in Centigrade or Fahrenheit
- Maximum output load (heating or cooling): 1100W(110V)
- Dual display window, capable of measuring temperature and setting the temperature at the same time
- Temperature calibration (if necessary)
- Compressor delay protection for refrigeration control
- Capable of setting high and low-temperature alarms
- Over-temperature and sensor fault alarm
- What You Get:
- 1x ITC-308 Controller
- 1x NTC Sensor
- 1x English Manual
- 1x Warranty Card
Heating&Cooling Socket
- 2 Stages(either Heating or Cooling mode)
- Relay Contact Capacity:Heating (10A, 100-240VAC)/Cooling (10A, 100-240VAC)
- Input Power:100 ~240VAC, 50Hz/60Hz
2 Digital Display
- Temperature Control Range:-50~120 °C / -58~248 ° F
- Temperature Resolution:0.1 ° C / 0.1° F
- Temperature Accuracy:±1°C (-50 ~ 70°C) /±2°F (-58 ~ 160° F)
Plug & Play
- Buzzer Alarm: High and Low-Temperature Alarm
- Ambient Temperature:-30~ 75 ° C / -22~ 167 ° F
- Dimension (Main Body):5.5x2.7x1.3 inch (140x68x33mm)
Heating&Cooling Socket
- 2 Stages(either Heating or Cooling mode)
- Maximum output load 1200w
- On/Off Control mode
- Power Supply AC 120V
Store CategoriesStore Categories