When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
- 5 HP main spindle motor using electronic variable frequency drive and capable of running using single phase power
- Digital RPM display 20–400-2500 infinitely variable spindle speeds
- Hardened and ground gears and bed ways
- Cast iron machine base and bed, with full length splash guard and front removable slide-out chip tray for easier maintenance
- Foot brake and T-Slot compound; Dual Inch/metric dials with Quick-change Single view sleeve
- Inch/metric ruler on tailstock quill
- Interlocked breaker switch on electrical cabinet
Machine Capacity
Swing over bed
14-3/16” (360 mm)
Swing over cross slide
8-3/8” (214 mm)
Swing over gap
21” (533 mm)
Width of bed
10-1/4” (260 mm)
Distance between centers
40” (1000 mm)
Cross slide travel
8-11/16” (220 mm)
Top slide travel
5-1/2” (140 mm)
Main Spindle
Spindle speeds
Inf. Variable (2 ranges)
Spindle speed range
20-400-2500 rpm
Through hole diameter
2-1/16” (52.5 mm)
Spindle nose
D1-6 camlock
Spindle bore taper
MT #6
Threads
Standard (Whit-worth)
45 (2-72) tpi
Metric pitch
39 (0.2-14) mm
Module (mm)
18 (0.3-3.5)
Diametrical
21 (8-44) DP
Feeds
Longitudinal feeds
0.002”-0.067” in/rev
Cross feeds
0.001”-0.034” in/rev
Leadscrew diameter
1-1/8” (29 mm)
Thread pitch
4 tpi
Quill travel
6” (155 mm)
Quill diameter
2” (52 mm)
Quill bore taper
MT #4
Power
Main motor
5 HP (3-phase)
Coolant pump motor
1/8 HP (3-phase)
Overall dimension
81” x 36” x 60” (LxWxH)
Packing dimension
87” x 42” x 66” (LxWxH)
Weight
Net weight
3190 lbs
Gross weight
3630 lbs
STANDARD ACCESSORIES
- 3-jaw chuck (9”)
- Chuck cover
- Steady rest
- Follow rest
- 4-position tool post
- Coolant system
- Full length splash guard
- Halogen work light
- Carriage stop
- Thread chasing dial
- Toolbox with standard tools
POWER REQUIREMENTS: 208/230 volts, 60 Hz,3-phase @ 20Amp or 1-phase @ 30 Amp.
OPTIONS AND ACCESSORIES
Acu-Rite 203 DRO(2-axis, x=0.0001”/z=0.0002” $ 3,250.00
DRO installation $ 475.00
Chuck guard with safetyshut-off $ 500.00
Aloris CXA #3-Set (toolpost plus 6 $ 1,970.00
5C lever style $ 2,280.00
5C front mount handwheel style collet closer $ 1,850.00
Royal spindle type livecenter $ 1,190.00
Upgrade to “Zero-set”3-jaw chuck w/back plate (8” $ 1,650.00
4-jaw independent chuck(10” $ 875.00
Taper $ 2,065.00
Face plate (12” $ 780.00
Transformer for 440vpower (5 $ 1,250.00
Micro carriage $ 375.00
Coolant (1 gal, $ 100.00