Kent USA ML-1740 Engine Lathe w/ Sony DRO, Drian Tool Post, 12\" 3-Jaw Chuck For Sale

We Carry Used Machinery & Process EquipmentSKU#IPML-1740Kent USA ML-1740 Engine Lathe w/ Sony DRO, Drian Tool Post, 12\" 3-Jaw Chuck2000 Kent ML-1740 Engine Lathe with Sony LG10, 2 Axis DRO, and plenty of Tooling. This Lathe is in very good condition and has been tested (SEE VIDEO). The X-Axis on the Sony DRO is reading an ERROR. We believe there to be a broken connection or shorted wiring between the DRO and Scales. We have listed all the specifications and additional tooling below.Kent USA ML-1740T Precision Lathe7.5 HP Spindle Motor
3.125” Spindle Through Hole
Solid Full Length Casting Base with Front Loading Chip Tray for Easier Cleaning
Adjustable Over-load Feed Clutches
Quick Reversal Feed from Apron
Full-length Safety Foot Brake
Spindle Jog Button Control
One-shot Lubrication for Apron, Carriage, and Bed Ways
Multi-position Adjustable Feed Position Stops
Dual Inch/Metric Calibrated Tailstock Quill with Knockout Tang; Heavy Duty Two Speed Tailstock
Dual Inch/Metric Dials with Quick-change SleeveMachine Specifications:
Capacity
Swing over bed ways
17” (435mm)
Swing over cross slide
10.875” (277mm)
Swing over gap
24.5” (622mm)
Gap length (w/ face plate)
8” (200mm)
Bed width
12” (305mm)
Distance between centers
44” (1120mm)
Headstock
Spindle hole
3.125” (80mm)
Spindle nose camlock
D1-6
Spindle to sleeve taper
MT#7 – MT#4
Spindle speed
12 Steps, 36 – 1800 RPM
Spindle speed ranges
N/A
Carriage
Bearing length on ways
17.3” (440mm)
Cross slide width
7.25” (185mm)
Cross slide travel
10.6” (270mm)
Top slide (compound) travel
4.75” (120mm)
Feed Box
Thread capacity (inches)
45, 2 - 72 TPI
Thread capacity (metric)
39, 0.2 - 14 MM
Modular threads range
18, 0.3 - 3.5 M
Diametral pitch range
21, 8 – 44 DP
Longitudinal feeds
0.0015 – 0.04 IPR
Cross feeds
0.00075 – 0.02 IPR
Tailstock
Quill diameter with tang
2.3” (59mm)
Quill travel
5” (130mm)
Quill taper
MT#4
Power
Main motor
7.5 HP
Coolant pump motor
1/8 HP
Control circuit voltage
115 V
Dimension
Shipping weight (approx)
3850 LBS
Gross weight (approx)
4510 LBSTooling Included:
(1) Drian Quick Change Toolpost
(1) Follow Rest
(1) 12\" 3-Jaw Chuck
(1) 12\" 4-Jaw Chuck
(2) Boring Bar Holder (boring bar not included)
(5) Tool Holders
(1) Lot of assorted cutting toolsSpeed ControlCircuit BreakersSafety RelaysElectric MotorsServo MotorsLight Drives

Company Checks can be made out to \"Industrial Parts R Us Inc.\" and mailed to Industrial Parts R Us Inc. 113 Reardon Blvd Bardstown KY 40004.

Domestic Shipping:

We are always happy to accommodate our customers and fully understand the importance of timely shipping. Please view our shipping policies below to better understand how we can help you.

• All \"non-freight\" orders placed before 11:00 A.M. EST will be shipped the same day. All orders placed after 11:00 A.M. EST will be shipped on the following day. 
• All smaller items 15 lbs. and under ship USPS Priority Mail. Larger packages up to 150 lbs. will be shipped UPS Ground Service. 
• Next Day Service is available if order is placed by 3:30 P.M. EST. For Emergency Orders contact us via messaging service.
• Tracking numbers will be posted automatically and emailed to the buyer. If you would like for us to use your UPS, USPS, or FedEx, account numbers, be sure to post a note on your invoice with the shipping address and your account number. 
• We will insure items at the request of the buyer. All items over $1000 are automatically insured and added to the shipping price unless the buyer requests ORDERS:

  
  

  • Items requiring Freight Shipping are usually shipped out within 2 days after the order is placed. NOTE: If your item requires a flatbed trailer for shipping, booking times have taken up to 2 weeks to arrange a carrier. This is not always the case but has happened in the past.
  • We will arrange freight shipping for you. Just send us your zip code and let us know if it is a Commercial Address or a Residential Address. If you do not have a forklift or loading dock BE SURE TO SPECIFY IF A LIFTGATE SERVICE IS NEEDED. If this information is left out the freight carriers will charge extra fees for having to deliver twice. We will strap your items to a pallet and load at no charge. If you would like for us to crate your item, contact us and we will send you a quote for crating your item.

  
  

  FREIGHT INSURANCE:

  
  

  Accidents do happen. It is the customers responsibility to request Freight Shipping Insurance on your item. In most cases it will be an extra $40.00. Otherwise Industrial Parts R Us Inc. will not be held responsible for damaged shipments due to Freight Carrier Damage. (We do not use Saia Freight for this reason)

  
  

  INTERNATIONAL Shipping is available. We will ship wordwide. Industrial Parts R Us Inc. will not be held responsible for delays due to customs clearance.

  Industrial Parts R Us Inc. will guarantee all items new and used for 30 days after the item has been received. (See Terms and Conditions). The buyer has the option to exchange the item if we have another in stock, or for the purchase price. The buyer is responsible for all return shipping charges. Refunds will be issued upon return of the item. Thank you from Industrial Parts R Us!!!!

  Industrial Parts R Us Inc. 2017$Click here to see description IPML-1740SKU#2000 Kent ML-1740 Engine Lathe with Sony LG10, 2 Axis DRO, and plenty of Tooling. This Lathe is in very good condition and has been tested (SEE VIDEO). The X-Axis on the Sony DRO is reading an ERROR. We believe there to be a broken connection or shorted wiring between the DRO and Scales. We have listed all the specifications and additional tooling below.Kent USA ML-1740T Precision Lathe7.5 HP Spindle Motor
  3.125” Spindle Through Hole
  Solid Full Length Casting Base with Front Loading Chip Tray for Easier Cleaning
  Adjustable Over-load Feed Clutches
  Quick Reversal Feed from Apron
  Full-length Safety Foot Brake
  Spindle Jog Button Control
  One-shot Lubrication for Apron, Carriage, and Bed Ways
  Multi-position Adjustable Feed Position Stops
  Dual Inch/Metric Calibrated Tailstock Quill with Knockout Tang; Heavy Duty Two Speed Tailstock
  Dual Inch/Metric Dials with Quick-change SleeveMachine Specifications:
  Capacity
  Swing over bed ways
  17” (435mm)
  Swing over cross slide
  10.875” (277mm)
  Swing over gap
  24.5” (622mm)
  Gap length (w/ face plate)
  8” (200mm)
  Bed width
  12” (305mm)
  Distance between centers
  44” (1120mm)
  Headstock
  Spindle hole
  3.125” (80mm)
  Spindle nose camlock
  D1-6
  Spindle to sleeve taper
  MT#7 – MT#4
  Spindle speed
  12 Steps, 36 – 1800 RPM
  Spindle speed ranges
  N/A
  Carriage
  Bearing length on ways
  17.3” (440mm)
  Cross slide width
  7.25” (185mm)
  Cross slide travel
  10.6” (270mm)
  Top slide (compound) travel
  4.75” (120mm)
  Feed Box
  Thread capacity (inches)
  45, 2 - 72 TPI
  Thread capacity (metric)
  39, 0.2 - 14 MM
  Modular threads range
  18, 0.3 - 3.5 M
  Diametral pitch range
  21, 8 – 44 DP
  Longitudinal feeds
  0.0015 – 0.04 IPR
  Cross feeds
  0.00075 – 0.02 IPR
  Tailstock
  Quill diameter with tang
  2.3” (59mm)
  Quill travel
  5” (130mm)
  Quill taper
  MT#4
  Power
  Main motor
  7.5 HP
  Coolant pump motor
  1/8 HP
  Control circuit voltage
  115 V
  Dimension
  Shipping weight (approx)
  3850 LBS
  Gross weight (approx)
  4510 LBSTooling Included:
  (1) Drian Quick Change Toolpost
  (1) Follow Rest
  (1) 12\" 3-Jaw Chuck
  (1) 12\" 4-Jaw Chuck
  (2) Boring Bar Holder (boring bar not included)
  (5) Tool Holders
  (1) Lot of assorted cutting toolsKent USA ML-1740 Engine Lathe w/ Sony DRO, Drian Tool Post, 12\" 3-Jaw ChuckPayment

  Payment for your item is due within 7 day of purchase.  We accept Paypal, Visa, Mastercard, AMEX, and Company Checks.  

  Company Checks can be made out to \"Industrial Parts R Us Inc.\" and mailed to Industrial Parts R Us Inc. 113 Reardon Blvd Bardstown KY Shipping:

  
  

  We are always happy to accommodate our customers and fully understand the importance of timely shipping. Please view our shipping policies below to better understand how we can help you.

  • All \"non-freight\" orders placed before 11:00 A.M. EST will be shipped the same day. All orders placed after 11:00 A.M. EST will be shipped on the following day. 
  • All smaller items 15 lbs. and under ship USPS Priority Mail. Larger packages up to 150 lbs. will be shipped UPS Ground Service. 
  • Next Day Service is available if order is placed by 3:30 P.M. EST. For Emergency Orders contact us via messaging service.
  • Tracking numbers will be posted automatically and emailed to the buyer. If you would like for us to use your UPS, USPS, or FedEx, account numbers, be sure to post a note on your invoice with the shipping address and your account number. 
  • We will insure items at the request of the buyer. All items over $1000 are automatically insured and added to the shipping price unless the buyer requests ORDERS:

    
    

    • Items requiring Freight Shipping are usually shipped out within 2 days after the order is placed. NOTE: If your item requires a flatbed trailer for shipping, booking times have taken up to 2 weeks to arrange a carrier. This is not always the case but has happened in the past.
    • We will arrange freight shipping for you. Just send us your zip code and let us know if it is a Commercial Address or a Residential Address. If you do not have a forklift or loading dock BE SURE TO SPECIFY IF A LIFTGATE SERVICE IS NEEDED. If this information is left out the freight carriers will charge extra fees for having to deliver twice. We will strap your items to a pallet and load at no charge. If you would like for us to crate your item, contact us and we will send you a quote for crating your item.

    
    

    FREIGHT INSURANCE:

    
    

    Accidents do happen. It is the customers responsibility to request Freight Shipping Insurance on your item. In most cases it will be an extra $40.00. Otherwise Industrial Parts R Us Inc. will not be held responsible for damaged shipments due to Freight Carrier Damage. (We do not use Saia Freight for this reason)

    
    

    INTERNATIONAL Shipping is available. We will ship wordwide. Industrial Parts R Us Inc. will not be held responsible for delays due to customs clearance.

    Returns

    Industrial Parts R Us Inc. will guarantee all items new and used for 30 days after the item has been received. (See Terms and Conditions). The buyer has the option to exchange the item if we have another in stock, or for the purchase price. The buyer is responsible for all return shipping charges. Refunds will be issued upon return of the item. Thank you from Industrial Parts R Us!!!!