When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
MIG-250 PRO 220V 250 Amp MIG/Stick/TIG Multi-Process Welder
MIG-250 PRO 3-in-1 multi-process synergic welder is powerful helper in welding, The IGBT inverter technology provides high power in a light, compact unit .it's designed for for hardware, decoration, car modification, equipment and factory maintenance .This units are capable of performingMIG(can weld aluminum) ARC and LIFT TIG.
NOTE: The lift tig can't weld aluminum
IT IS COMPATIBLE WITH SPOOL GUN(need buy extra SPOOL GUN ,not included inside product).
- MIG/MAG/FLUX Welding,Can take up to 035"(0.9 mm) MIG solid wire(Gas MIG), .035"(0.9 mm) MIG FLux wire(Gasless MIG), 035”/.045” aluminum wire.
- Stick Welding, smooth weld and burning fast. This unit can weld with 7018/6011 electrodes up to 5/32"
- Lift TIG is optional(need buy extra TIG lift torch,not included inside product).
Package Includes
- 10ft Mig Gun (with a Graphene liner)
- 10ft Electrode holder with cable
- 10ft ground clamp with cable
- Gas hose
- W-type .030”/.035” roller driver
- V-type .023”/.030” roller driver (.030”/.035” built-in )
- U-type .035"/.045” roll driver
- Hammer &Brush
Speceifcition
- Supply Voltage: 220VAC 50/60 Hz
- OUTPUT CURRENT: 30-250A (MIG) 20-225A (MMA) 10-250A (TIG)
- DUTY CYCLE : 60% @250A, 100% @193A
- Can handle 2 and 10 pound rolls of wire
- Efficiency: 80%
- Protection Class: IP21S
Product Highlights
Multi-functions
-MIG synergistic setting & MIG manual setting, Gasless Flux wire MIG Welds(can weld aluminum) , stick welds, and Lift TIG welds. Dynamic control-set arc control to crisp or soft depending on your preference and application. (TIG torch and SPOOL GUN need purchasing separately, WP-17V-35,LBT150)
Synergic Controlled
- "One button selection"design, easy to choose different welding mode to meet different welding requirements, Gas/Gasless MIG, Stick or Lift TIG.
- Synergic Control MIG Function allows the automatic change of the voltage & wire feeding speed by adjusting the amperage or choosing different thicknesses. It will match the welding chart set in the data.
Various Welding Wire
Suitable for all kinds of welding requirements
- .023”/.030”/.035” solid/SS wire,
- .023”/.030”/.035” flux core wire for MIG manual setting; only .035” available in MIG synergistic setting
- .035”/.045” aluminum wire.
1.Welding Mode Selection: Manual MIG, Synergic MIG, MMA(STICK), Lift TIG
2.Welding Materials Selection: 100% CO2 Fe(Carbon Steel), 75% Ar/25% CO2 Fe(Carbon Steel/Stainless Steel), Flux wire(Carbon Steel) and 100% Ar AL(Aluminum)
3.Value Adjusting Knob, Push the knob enter (Hidden MENU Selection); Specs Code, pls read the end of instructions
4.Selection Wire Diameters(Solid Wire .023"/.030"/.035" ;Flux wire .035"; Aluminum Wire .035"/.045"
5.Synergic MIG Mode: Welding Current Micro Adjusting -5~+5(-1.5V~+1.5V); Wire Feed Speed can not be adjusted(Automatic fitted by welder Data)
Manual MIG Mode: Welding Voltage Adjustable at (12.5-30V) ;Wire Feed Speed(2-15 m/Min)
6.Manual Wire Feeding
