When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Milling Attachment
Cast iron and steel with moulded handwheelReplaces the compound restTravel is 3.6\"Dial graduations in 0.025 mm, 60 divisions
The mini lathe milling attachment replaces the compound rest on the mini lathe.The vise opening is 1.9\". The width of the vise is 2.6\" and the depth is 1.4\".The travel is 3.6\". The dial is graduated in 0.025 mm (approximately 0.001\") and there are 60 divisions, so the advance is 1.5 mm (0.059\") per revolution.This lathe milling machine attachment should work on most any lathe with 7\" or greater swing with the addition of a shop-made adapter block to adapt the bolt pattern to fit the lathe.
S/N:10061
Compatible with
SIEG C2/SC2/C3, OTMT C2,Craftex CX704,Grizzly G8688, Mr.Meister Compact 9/ JET BD-6/BD-X7/BD-7MANROD MR-300/MR-301,SOGI M1-250/M1-350S,Baumr-AG BMLAT-05/BMLAT-07
