NEW spo2 PI PR Rechargeable / Mains Operated Desktop Pulse Oximeter Software USA For Sale

Contec Portable Pulse Oximeter SPO2 Sensor Blood Oxygen Heart Rate PC Software CMS70A

Instructions

Principle of the CMS70A Pulse Oximeter isas follows: Photoelectric Oxyhemoglobin Inspection Technology is adopted inaccordance with Capacity Pulse Scanning & Recording Technology,the PulseOximeter can be used in measuring the pulse oxygen saturation and pulse ratethrough finger.The product is suitable for being used in family, hospital,oxygen bar, community healthcare, physical care in sports (It can be used beforeor after doing sports, and it is not recommended to use the device during theprocess of having sport) and etc.

MajorFeatures

1. Operation of the product is simple ,lowpower consumption
   
2. SpO2 valuedisplay
   
3. Pulse rate value display, bar waveform display
   
4. Menu operation
   
5. Screen brightness can bechanged
   
6. Thedisplay mode can be changed
   
7. Pulse rate sound indication, it can beturned on or turned off
   
8. With measured data overruns limits andlow-voltage alarm function,the upper/down alarm range can beadjustable
   
9. Battery indication: low-voltageindicator appears before working abnormally which is due to low-voltage, andwith alarm function
   
10. Connected with an external oximeterprobe
    
11. Data storage function,and the storage datacan be uploaded to computer
    
12. Real-time data can be transmitted tocomputers

Mainperformance

• Display Mode: TFT Screen and LEDdisplay
  
• Screen Resolution:320*240
  
• SpO2 Measuring Range:0%～100%(the resolution is 1%)
  
• Accuracy: 70%～100%: ±2%, Below 70%unspecified.
  
• PRMeasuring Range: 30bpm～250bpm(the resolution is 1bpm)
  
• Accuracy: ±2bpm or ±2% (selectlarger)
  
• Measurement Performance in Weak FillingCondition:SpO2 and pulse rate can be shown correctly whenpulse-filling ratio is 0.4%. SpO2 error is ±4%, pulse rate error is±2 bpm or ±2% (select larger).
  
• Resistance to surrounding light: Thedeviation between the value measured in the condition of man-made light orindoor natural light and that of darkroom is less than ±1%.
  
• Power Consumption: About350mA
  
• Voltage:AC 100～240V,50/60HZ
  
• Power Supply: Built-in recharge Li-Polymer
  
• Battery working hour: after the devicebuilt-in battry finished the charge,it's continuous working time is not lessthan 1 hour
  
• Safety Type:II device, BFType

Accessories

• Sell in standard
  A usermanual
  A power wire
  A dataline
  An oximeter probe
  A disk (PCsoftware)
  
• Sell in addition
  Otheroximeter probe(Refer to the product configuration BOM fordetails)

Physical Identity

Buy safe products
The following FDA Disclaimer is required for all listing in Healthcare category and is included for REFERENCE: The sale of this item may be subject to regulation by the U.S. Food and Drug Administration and state and local regulatory agencies. If the item is subject to FDA regulation, we will verify your status as an authorized purchaser of this item before shipping of the item.
The Fingertip Pulse Oximeter is registered on the Australian Register of Therapeutic Goods (ARTG)with the code 197923, and certified by FDA of United States and CE,TUV of Europe. The Fingertip Pulse Oximeter that is FDA 510K Approved
International Buyer--Please note:
Import duties,Taxes are not included in the item price.These charges are buyers' responsibilityWe are the manufacturer of medical equipment for 17 years, the following are our main products:
ECG / ECG holter EEG / EEG Holter B-ultrasound
Patient Monitor Fetal doppler Fetal Monitor
Spo2 Monitor Stethoscope Medical Image....
Agent in the world!
We are look for partners in the world now!
Do you want to become our agent in you conutry?
Join US!
Skype:xuebox3
contec.med.mary at hotmail.com

Only English User Manual,Please contact us if you need other language version.thank you