Nice dust bug & a Rega RB-200 Tonearm, working but needs attention. For Sale

x2 Tannoy 8\" Dual-Concentric Drivers.
Just removed from the Rega Planar 2 I\'m also selling.....
Was working both channels and sounding nice, then it would lose a channel, so I investigated and found that a wire was loose on the phono lead.
The connector that was wired to the tonearm cable under the tonearm wasn\'t suitable so it was removed. (looks like it could do with a new socket underneath or hard-wiring to some new cable)In excellent condition...with a very small amount of play in the bearings.
I have since learnt that the bias/anti skate can become inoperative with these... I cannot comment if it has or notas it is not on the deck anymore & cannot test.
I recently found the dust bug in my bits n bobs cupboard, so I am also going to include it. Looks like it\'s had very little use.Here is a reply I made (but forgot to click to display it lower down in the Q&A section!) which hopefully make things sound clearer....
\"Hello.Yes sorry it is easy to say but hard to write and describe! :)
Basically, the socket under the arm was missing, so the arm wires were soldered to the pins on the arm cable plug.
I can only guess that someone thought to remove and do that to it to make it better ? or maybe it got loose so was removed/ bypassed.
It does not need re-wire , it was working both on left and right, but will either need soldering to an audio lead and heat shrinking it to the thin arm wires, or solder the thin wires to a set of cable tags, then attach the audio lead to the tags.
The bias may work or it may not, I never tried the function, I did not try use the Planar for long, I bought the deck just a few days ago, and selling it as it is my job :)
I only found out about the bias problems to some of the arms on when I read another listing for the same item, so I am mentioning my may work or not as a matter of caution.
Best wishes, Mark\"
EXCELLENT PACKING GUARANTEE\'D!
UK is free postage.
Europe £10
Canada & USA £12
Rest of The World £18