OEM NISSAN XTERRA PATHFINDER FRONTIER TITAN VERSA KEYLESS REMOTE FOB CWTWB1U821 For Sale

SFfobsinc.
:FOR SALE:GREAT CONDITION FACTORY OEM NISSAN
KEYLESS ENTRY REMOTE FOB TRANSMITTER***OEM REMOTE***NO CHIPPED OR CRACKED CASES
NO WORN BUTTONSFCC ID:CWTWB1U821P/N:28268ZT, 28268EA,28268-ZT03A
INTERCHANGE PART NUMBER:CWTWB1U733CWTWB1U415
:WORKS WITH:2005 2006 2007 2008 2009 2010 2011 2012 2013 2014
NISSAN XTERRA2005 2006 2007 2008 2009 2010 20112012
NISSAN PATHFINDER
2006 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 5017 2018 2019 2020
NISSAN FRONTIER2007 2008 2009 2010 2011 2012 2013 2014 2015 2016
NISSAN TITAN
2007 2008 2009 2010 2011 2012
NISSAN VERSA
NISSAN SENTRA
2007 2008
NISSAN MURANO2011 2012 2013 2014 2015 2016 2017 2018NISSAN NV
2008 2009 2010 2011 2012 2013 2014NISSAN ARMADA
PLEASE BE SURE TO MATCH FCC ID AND PART NUMBERS WITH A CURRENT REMOTE. IF YOU ARE UNSURE OF COMPATIBILITY CHECK WITH YOUR LOCAL DEALER BEFORE PURCHASING.MAY WORK WITH OTHER MODELS AND YEARS.
:PROGRAMMING:FREE DO IT YOURSELF PROGRAMMING(INCLUDED ON BOTTOM OF THIS PAGE)OR
AUTHORIZED DEALER OR AUTOMOTIVE LOCKSMITH
:PAYMENT:
PLEASE MAKE ARRANGEMENTS TO PAY FOR THE ITEM WITHIN 1 DAY OF PURCHASING.:WARRANTY:
ALL TRANSMITTERS CARRY A STANDARD 30 DAY WARRANTY.
WARRANTY\'S WILL COME IN THE FORM OF A REFUND OR REPLACEMENT.:SHIPPING:
ALL ITEMS ARE SHIPPED WITHIN 1 BUSINESS DAY OF RECEIPT OF PAYMENT.
ITEMS WILL BE SHIPPED USPS FIRST CLASS MAIL WITH DELIVERY CONFIRMATION.ANY QUESTIONS PLEASE EMAIL THROUGH .THANK YOU
(ONE)

Note: You must have all remotes on hand when performing this procedure. Any remotes not used during this procedure will become inactive.

1. Close and lock all doors with the driver\'s side power lock / unlock switch located on drivers door panel.
2. Insert key into ignition (DON\'T TURN) and remove it from the ignition key cylinder at least 6 times within 10 seconds (this will need to be done at approximately one second intervals). Your hazard lamps will flash if you have performed this step correctly. PLEASE NOTE: Withdraw key completely from ignition cylinder each time. If this procedure is performed too fast or too slow the system will not enter programming mode.
3. Insert key into ignition and turn to the ACC position.
4. Within 5 seconds, push the LOCK button on the keyless remote. Your hazard lamps will flash. PLEASE NOTE: Do not press the button on the remote more than one time or the programming will not be successful.
5. If there are any remaining remotes (including working ones), Unlock then Lock all doors using the switch on drivers door panel. Within 5 seconds of locking and unlocking doors press LOCK button on the next remote. Your hazard lamps will flash. Repeat this step for each remote (including any working remotes).
6. When all remotes have been programmed turn the key to the OFF position, remove keys from the ignition, unlock doors using the driver’s side power lock/unlock switch and open the driver side door. Test all remotes.